لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت

السؤال #1
An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets. If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC. Which feature meets these requirements?
A. learn client IP address
B. FlexConnect local authentication
C. VLAN-based central switching
D. central DHCP processing
عرض الإجابة
اجابة صحيحة: A
السؤال #2
Which two statements about the requirements for a Cisco Hyperlocation deployment are true? (Choose two.)
A. After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN controller must be restarted
B. NTP can be configured, but that is not recommended
C. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX
D. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller
E. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments
عرض الإجابة
اجابة صحيحة: AC
السؤال #3
For security purposes, an engineer enables CPU ACL and chooses an ACL on the Security > Access Control Lists > CPU Access Control Lists menu. Which kind of traffic does this change apply to, as soon as the change is made?
A. wireless traffic only
B. wired traffic only
C. VPN traffic
D. wireless and wired traffic
عرض الإجابة
اجابة صحيحة: C
السؤال #4
Which three properties are used for client profiling of wireless clients? (Choose three.)
A. HTTP user agent
B. DHCP
C. MAC OUI
D. hostname
E. OS version
F. IP address
عرض الإجابة
اجابة صحيحة: ABC
السؤال #5
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
A. B
A. B
عرض الإجابة
اجابة صحيحة: B
السؤال #6
What is an important consideration when implementing a dual SSID design for BYOD?
A. After using the provisioning SSID, an ACL that used to make the client switch SSIDs forces the user to associate and traverse the network by MAC filtering
B. If multiple WLCs are used, the WLAN IDs must be exact for the clients to be provisioned and traverse the network correctly
C. SSIDs for this setup must be configured with NAC State-RADIUS NAC for the clients to authenticate with Cisco ISE, or with NAC State-ISE NAC for Cisco ISE to associate the client
D. One SSID is for provisioning and the other SSID is for gaining access to the networ
E. The use of an ACL should not be enforced to make the client connect to the REAL SSID after provisioning
عرض الإجابة
اجابة صحيحة: D
السؤال #7
An engineer configures the wireless LAN controller to perform 802.1x user authentication. Which configuration must be enabled to ensure that client devices can connect to the wireless, even when WLC cannot communicate with the RADIUS?
A. pre-authentication
B. local EAP
C. authentication caching
D. Cisco Centralized Key Management
عرض الإجابة
اجابة صحيحة: B
السؤال #8
A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers. Which protocol must be allowed to reach the MSE from the controllers?
A. SOAP/XML
B. NMSP
C. CAPWAP
D. SNMP
عرض الإجابة
اجابة صحيحة: A

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف: