لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?
A. -78 to -65 dBm B
B. 85 to -65 dBm
C. -85 to -67 dBm
عرض الإجابة
اجابة صحيحة: B
السؤال #2
An engineer must ensure that the wireless network can accomplish fast secure roaming by way of caching keys on the access points. Which key caching mechanism is enabled by default on a Cisco AireOS WLC?
A. SKC
B. OKC
C. 802
D. CCKM
عرض الإجابة
اجابة صحيحة: B
السؤال #3
A network engineer is working on a design for a wireless network that must support data, voice, and location services. To support these services, which access point placement must the engineer use?
A. corner only
B. perimeter and corner
C. perimeter only
D. indoor and outdoor
عرض الإجابة
اجابة صحيحة: B
السؤال #4
As part of a wireless site survey in a hospital, an engineer needs to identify potential Layer 1 interferers. In which two areas is the engineer most likely to find sources of 2.4 GHz and 5 GHz RF noise? (Choose two.)
A. magnetic resonance imaging
B. kitchen
C. Gamma Knife radiation treatment
D. X-ray radiography
E. patient room
عرض الإجابة
اجابة صحيحة: BE
السؤال #5
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?
A. roaming design model
B. voice design model
C. location design model
D. high-density design model
عرض الإجابة
اجابة صحيحة: A
السؤال #6
A customer asks an engineer to explain the concept of mobility domains and mobility groups. Which statement does the engineer respond with?
A. A mobility group does not constrain the distribution of security context of a client and also does not constrain AP fail-over between controllers when the WLC are in the same mobility domain
B. If WLCs are in the same mobility domain, they communicate with each other but, if an anchor WLC is present it must be in the same mobility domain for communication to be possible
C. If WLCs are in the same mobility domain, they communicate with each othe
D. Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers
E. WLCs do not need to be in the same mobility domain to communicate with each othe
F. Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers
عرض الإجابة
اجابة صحيحة: C
السؤال #7
An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?
A. The edge of the cell should be -67 dBm
B. The edge of the cell should be below 35 RSSI
C. The measurement should be done on the 2
D. One AP should be deployed per 3000 square feet
عرض الإجابة
اجابة صحيحة: A
السؤال #8
An engineer must configure the virtual IP address on multiple controllers in a mobility group. Which rule must the engineer follow to ensure proper roaming?
A. Ensure that the DNS entry is tied to the virtual IP address of the WLC
B. Use a unique IP address for each WLC
C. Ensure that the DNS Host Name field is defined
D. Use the same IP address for each WLC
عرض الإجابة
اجابة صحيحة: A
السؤال #9
Which statement about AP failover priority for access points when configured with priority 1 or 4 is true?
A. When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critica
B. This access point fails over before other access points with the lower priority when there is primary controller failure
C. When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critica
D. This access point fails over before other access points with the lower priority when there is primary controller failure
E. When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as lo
F. This access point fails over after other access points with the higher priority when there is primary controller failure
عرض الإجابة
اجابة صحيحة: B
السؤال #10
Refer to the exhibit. What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?
A. aesthetics
B. transmit power considerations
C. antenna gain
D. power supply considerations
عرض الإجابة
اجابة صحيحة: B
السؤال #11
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. What is the minimum requirement for the design?
A. overlapping -72 dBm coverage from two access points
B. continuous -67 dBm coverage from one access point
C. continuous -72 dBm coverage from one access point
D. overlapping -67 dBm coverage from two access points
عرض الإجابة
اجابة صحيحة: ABF

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.