لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت

السؤال #1
A switch is being downgraded to an earlier release because of a problem with the current release. After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?
A. Enable ISSD after the downgrade is complete
B. Roll back to the original image
C. Reload the switch
D. Shut and no shut the interfaces to the FEX
عرض الإجابة
اجابة صحيحة: B
السؤال #2
The Cisco Nexus switch is connected to a peer switch that is not running Cisco NX-OS. The switches are connected using port channel and are experiencing packet loss. Which action should be performed on the Cisco Nexus switch ports to resolve this issue?
A. Turn on lacp suspend-individual
B. Turn on lacp graceful-convergence
C. Turn off lacp graceful-convergence
D. Turn off lacp suspend-individual
عرض الإجابة
اجابة صحيحة: C
السؤال #3
A mission-critical server is connected to site
A. Connectivity to this server is lost from site B because the MAC route is missing in the OTV VDC of the Nexus 7000 in site B due to MAC aging
A. Use route-map to advertise this MAC statically and redistribute with ISIS
B. Unknown unicast flooding is not allowed
C. Use the otv flood mac <> command to selectively flood traffic for a given MAC
D. Use the otv isis bfd <> command to configure BFD protocol
عرض الإجابة
اجابة صحيحة: B
السؤال #4
An engineer discovers that an NPV/NPIV uplink experiences a heavy load and plans to add more uplinks. Which statement about what occurs when the new uplinks are added is true?
A. Only new connections use the new uplinks automatically
B. Paths must be defined before new connections can use the new uplinks
C. All connections must be reset before the new uplinks can be used
D. New and existing connections use the new uplinks automatically
عرض الإجابة
اجابة صحيحة: D
السؤال #5
An engineer is investigating a role mapping issue on a switch. The users report that they cannot view the IP addresses under the tenant “corp”. Which action resolves the issue?
A. Add the users to the RADIUS server
B. Update the UNIX ID
C. Configure the correct secret password between the APIC and the RADIUS server
D. Add the updated avpair to include/corp/admin/
عرض الإجابة
اجابة صحيحة: A
السؤال #6
An engineer is troubleshooting a packet flow from an access leaf to spine. Which EVPN routes are expected on this connection?
A. EVPN Type 1-5
B. EVPN Type 0,9,15
C. EVPN Type 9-15
D. EVPN Type 0,16
عرض الإجابة
اجابة صحيحة: AC
السؤال #7
An engineer is troubleshooting a fabric discovery failure. Which two requirements must an engineer verify about switch connectivity to solve the problem? (Choose two.)
A. A Cisco APIC must be attached to a spine node only
B. A Cisco APIC must be attached to leaf nodes
C. Spine nodes must connect to other spine nodes
D. A Cisco APIC must be dual-attached to two separate spine nodes
E. Leaf nodes must connect to spine nodes only
عرض الإجابة
اجابة صحيحة: B
السؤال #8
A network administrator attempts to install an application in the Cisco NX-OS Guest shell and receives an error that there is not enough space on the disk. Which command must the administrator run to increase the disk space available in the Guest shell?
A. guestshell growdisk rootfs [size-in-MB]
B. guestshell pvextend rootfs [size-in-MB]
C. guestshell resize rootfs [size-in-MB]
D. guestshell resize2fs rootfs [size-in-MB]
عرض الإجابة
اجابة صحيحة: A
السؤال #9
The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
A. event statement
B. environment variable
C. event-default action statement
D. configure terminal action
عرض الإجابة
اجابة صحيحة: C
السؤال #10
After upgrading a client’s fabric interconnect to the latest version, an engineer discovers that the appliance has lost its entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)
A. Equipment FSM page, InternalBackup stage
B. Service profiles page, InternalBackup stage
C. Admin page, PollInternalBackup stage
D. Equipment FSM page, PollInternalBackup stage
E. Admin page, InternalBackup stage
عرض الإجابة
اجابة صحيحة: AC
السؤال #11
The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
A. Enable IP redirects
B. Set the MTU to 1500 bytes
C. Configure HSRP version 2
D. Configure the same HSRP group on both devices
عرض الإجابة
اجابة صحيحة: A

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف: