لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
DRAG DROP Match the switching term to the correct definition.
A. Mastered
B. Not Mastered
عرض الإجابة
اجابة صحيحة: A
السؤال #2
Which two commands will save the running-config so that changes will be loaded automatically on the next reboot? (Choose two.)
A. write memory
B. save
C. copy config config1 config startup-config
D. copy running-config startup-config
E. copy running-config checkpoint boot-config
عرض الإجابة
اجابة صحيحة: C
السؤال #3
What is the correct description of a Multi- Layer Switch?
A. a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence
B. any switch that supports PoE, LLDP-MED and Flow Control
C. has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router
D. multi-Layer refers specifically to using chassis switches with several line cards over stack port switches
عرض الإجابة
اجابة صحيحة: C
السؤال #4
What are the benefits of a 3-Tier design over a 2- Tier? (Choose two.)
A. Offloading processing from the Core without routing at the Access layer
B. Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer
C. Lowering the cost of a deployment due to needing less switches overall
D. Better scalability in a campus with a large number of buildings
E. Gaining the flexibility to connect the Data-Center to any Access layer switch
عرض الإجابة
اجابة صحيحة: D
السؤال #5
What command will save your configuration on an Aruba AOS-CX switch so that your changes automatically load on next reboot?
A. copy running-config checkpoint startup-config
B. copy startup-config running-config
C. copy running-config initial-checkpoint
D. copy running-config default
عرض الإجابة
اجابة صحيحة: D
السؤال #6
Your customer has 349 users in a two-story building. What are two benefits of a 2-Tier design? (Choose two.)
A. Layer 2 and Layer 3 protocols run close to the endpoints to better implement ACL and QoS policy at the edge
B. Improved performance by offloading processing from the Access layer to the Core
C. Use of layer 2 switches at the access layer can process and route traffic from attached APs
D. Support for WAN/MPLS, Internet, and Data Center directly on the Collapsed core
E. Provides a more cost effective solution given that no additional switches are required for a third tier
عرض الإجابة
اجابة صحيحة: D
السؤال #7
Which statement is true regarding modern switching requirements?
A. Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today's power-over-Ethernet needs
B. Requirements for PoE are normally addressed using AC to DC power adapter
C. Concerns for port security for IoT devices are usually addressed using default wired encryption that all 802
D. While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed
E. Clients tend to prefer wireless connections, raising the need for PoE port acces
F. There is also a growing amount of IoT devices that require security and port authentication options
عرض الإجابة
اجابة صحيحة: D
السؤال #8
What are two mechanisms supported on AOS-CX 6300 switches used in Multi-active Detection to determine the status of the Primary member? (Choose two.)
A. Management interface split detection
B. Peer switch-based detection
C. Loopback keepalives
D. ARP-based
E. BFD
عرض الإجابة
اجابة صحيحة: A
السؤال #9
DRAG DROP Match each description to the correct management tool for Aruba AOS-CX. Select and Place:
A. Mastered
B. Not Mastered
عرض الإجابة
اجابة صحيحة: D
السؤال #10
All switches are running Aruba OS-CX. While working in the terminal of Access-2, you are unable to reach Server-1 using SSH. What is the correct command to ping Server-1 from Access-2 to test reachability?
A. Access-2# ping6 172
B. Access-2# ping 172
C. Access-2# ping 172
D. Access-2# ping 172
عرض الإجابة
اجابة صحيحة: CD
السؤال #11
What is the binary conversion of the hexadecimal value 0x2001?
A. 0010 0001
B. 0002 0000 0000 0001
C. 0011 0000 0000 0001
D. 0010 0000 0000 0001
عرض الإجابة
اجابة صحيحة: AE

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.