Scenario: A Citrix Administrator deployed a Citrix ADC in one-arm mode. Currently, the VLANs 20, 30, and 40 are tagged on the interface with the option of ‘tagall’. What is true regarding the VLANs, when ‘tagall’ is enabled on the interface?

Scenario: A Citrix Administrator is configuring a new authentication, authorization, and auditing (AAA) virtual server, and the status is DOWN. The administrator makes the below configurations: add lb vserver lb_vsrv_www HTTP 10.107.149.229 80 -persistenceType NONE -cltTimeout 180 -authn401 ON -authnVsName SAML_SP bind lb vserver lb_vsrv_www_ssl Red_srv bind lb vserver Ib_vsrv_www_ssl Blue_srv add authentication vserver SAML_SP SSL 10.107.149.230 443 -AuthenticationDomain citrix.lab What should the administ

Scenario: While performing a disaster recovery test, a Citrix Administrator decides to failover the Citrix ADC high availability (HA) pair appliances. The administrator notices that the failover is NOT working as expected, and the secondary Citrix ADC is NOT taking over as primary. The administrator suspects that networking issues may be causing the failure. What could be the cause of this issue?

A Citrix ADC is connected with one network interface to the client network and another to the server network, ensuring that all traffic flows through the appliance. Which type of deployment is this?

Which two features can a Citrix Administrator use to allow secure external access to a sensitive company web server that is load-balanced by the Citrix ADC? (Choose two.)

What are three possible policy results in a default (advanced) policy configuration? (Choose three.)

A Citrix Administrator wants to customize the look of the landing page presented to users during the authentication process on Citrix ADC. Which nFactor component should the administrator modify in this scenario?

Scenario: A Junior Citrix Administrator needs to create a content switching virtual server on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192 168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes. The following day, a Senior Citrix Administrator tests the new content switching virtual server, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configure

Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly. Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?

A Citrix Administrator needs to provide access to Microsoft SharePoint through Citrix Gateway for users connecting from a web browser using the Citrix Gateway plug-in. How can the administrator configure this?

A Citrix Administrator needs to deploy a Citrix ADC between the servers and the client, with servers only allowed to reach the client through the Citrix ADC. In which mode should the administrator deploy the Citrix ADC?

A Citrix Administrator needs to block all local printer access from users in the Marketing department who are connecting remotely, but who should still have access when connecting inside the corporate network using the same Citrix Gateway. What can the administrator configure to accomplish this?

Scenario: Users are attempting to logon through Citrix Gateway. They successfully pass the Endpoint Analysis (EPA) scan, but are NOT able to see the client choices at logon. What can a Citrix Administrator disable to allow users to see the client choices at logon?

A Citrix Administrator deploys a new Citrix ADC MPX appliance in the demilitarized zone (DMZ), with one interface in the DMZ and the other on the internal network. In which mode should the administrator deploy the Citrix ADC?

Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC. What can the administrator do to increase bandwidth on the Citrix ADC?

Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL virtual servers?

A Citrix Administrator configured a load-balancing virtual server to utilize the least bandwidth load-balancing method. A service attached to this virtual server is brought into the effective state during production hours. During the startup of a virtual server, which load-balancing method is used by default?

A Citrix Administrator needs to configure a Citrix Gateway virtual IP to allow incoming connections initiated exclusively from web browser sessions. Which advanced policy will accomplish this?

Which Citrix ADC service monitor can a Citrix Administrator use to test the three-way handshake between the Citrix ADC and the backend server?

Scenario: A Citrix Administrator currently manages a Citrix ADC environment for a growing retail company that may soon double its business volume. A Citrix ADC MPX 5901 is currently handling web and SSL transactions, but is close to full capacity. Due to the forecasted growth, the administrator needs to find a cost-effective solution. Which cost-effective recommendation can the administrator provide to management to handle the growth?

What is a recommended practice for managing a Citrix ADC high availability (HA) pair to ensure that management changes are always made on the primary Citrix ADC?

Scenario: Client connections to certain virtual servers are abnormally high. A Citrix Administrator needs to be alerted whenever the connections pass a certain threshold. How can the administrator use Citrix Application Delivery Management (ADM) to accomplish this?