لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت

السؤال #1
A company wants 10 migrate its SAP ERP landscape to AWS The company will use a highly available distributed deployment for the new architecture Clients will access SAP systems from a local data center through an AWS Site-to-Site VPN connection that is already in place An SAP solutions architect needs to design the network access to the SAP production environment Which configuration approaches will meet these requirements? (Select TWO.)
A. For the ASCS instance configure an overlay IP address that is within the production VPC ClDR range Create an AWS Transit Gateway Attach me VPN to the transit gateway Use the transit gateway to route the communications between the local data center and the production VPC Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance
B. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create an AWS Transit Gateway Attach the VPN to the transit gateway Use the transit gateway to route the communications between the local data center and the production VPC Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance
C. For the ASCS instance configure an overlay IP address that is within the production VPC ClDR range Create a target group that points to the overlay IP address Create a Network Load Balancer and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance
D. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create a target group that points to the overlay IP address Create a Network Load Balancer, and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance
E. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create a target group that points to the overlay IP address Create an Application Load Balancer and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance
عرض الإجابة
اجابة صحيحة: B
السؤال #2
A company's SAP basis team is responsible for database backups in Amazon S3. The company frequently needs to restore the last 3 months of backups into the pre-production SAP system to perform tests and analyze performance. Previously an employee accidentally deleted backup files from the S3 bucket. The SAP basis team wants to prevent accidental deletion of backup files in the future. Which solution will meet these requirements?
A. Create a new resource-based policy that prevents deletion of the S3 bucket
B. Enable versioning and multi-factor authentication (MFA) on the S3 bucket
C. Create signed cookies for the backup files in the S3 bucket Provide the signed cookies to authorized users only
D. Apply an S3 Lifecycle policy to move the backup fries immediately to S3 Glacier
عرض الإجابة
اجابة صحيحة: B
السؤال #3
A company is running an SAP HANA database on AWS The company is running AWS Backint Agent for SAP HANA(AWS Backint agent) on an Amazon EC2 instance AWS Back agent is configured to back up to an Amazon S3 bucket The backups are failing with an AccessDeniod error m the AWS Backint agent log file. What should an SAP basis administrator do to resolve this error?
A. Assign execute permissions at the operating system level for the AWS Backint agent binary and for AWS Backint agent
B. Assign an 1AM role to an EC2 instance Attach a policy to the IAM role to grant access to the target S3 bucket
C. Assign the correct Region ID for the S3BucketAwsRegion parameter in AWS Backint agent for the SAP HANA configuration file
D. Assign the value for the Enable Tagging parameter in AWS Backint agent for the SAP HANA configuration file
عرض الإجابة
اجابة صحيحة: B
السؤال #4
A company has deployed SAP HANA m the AWS Cloud. The company needs its SAP HAN A database to be highly available An SAP solutions architect has deployed the SAP HANA database in separate Availability Zones in a single AWS Region SUSE Linux Enterprise High Availability Extension is configured with an overlay IP address. The overlay IP resource agent has the following IAM policy: During a test of failover the SAP solutions architect finds that the overlay IP address does not change to the secondary Availabili
A. Change the Action element to ec2 CreateRoute
B. Change the Action element to ec2 ReplaceRoute
C. Change the Action element to ec2 ReplaceRouteTableAssociation
D. Change the Action element to ec2 ReplaceTransrtGatewayRoute
عرض الإجابة
اجابة صحيحة: B
السؤال #5
A company hosts an SAP HANA database on an Amazon EC2 instance in the us-easi-1 Region. The company needs to implement a disaster recovery (DR) site in the us-west-1 Region. The company needs a cost- optimized solution that offers a guaranteed capacity reservation an RPO of less than 30 minutes and an RTO of less than 30 minutes. When solution will meet these requirements?
A. Deploy a single EC2 instance to support the secondary database in us-west with additional storage Use this secondary database instance to support QA and production Configure the primary SAP HANA database in us-east-1 to constantly replicate the data to the secondary SAP HANA database in us-west-t by using SAP HANA system replication with preload off During DR shut down the QA SAP HANA instance and restart the production services at the secondary site
B. Deploy a secondary staging server on an EC2 instance in us-west-1 Use CloudEndure Disaster Recovery to replicate changes at the database level from us-east-1 to the secondary staging server on an ongoing basis During DR, initiate cutover increase the size of the secondary EC2 instance to match the primary EC2 instance and start the secondary EC2 instance
C. Set up the primary SAP HANA database in us-east-1 to constantly replicate the data to a secondary SAP HANA database in us-west-1 by using SAP HANA system replication with preload on Keep the secondary SAP HANA instance as a hot standby that rs ready to take over in case of failure
D. Create an SAP HANA database AMI by using Amazon Elastic Block Store (Amazon EBS) snapshots Replicate the database and log backup files from a primary Amazon S3 bucket in us-east-1 to a secondary S3 bucket m us-west-1 During DR launch the EC2 instance in us-west-1 based on AMIs that are replicated Update host information Download database and log backups from the secondary S3 bucket Perform a point-in- time recovery
عرض الإجابة
اجابة صحيحة: A
السؤال #6
A company wants to improve the RPO and RTO for its SAP disaster recovery (DR) solution by running the DR solution on AWS The company is running SAP ERP Central Component (SAP ECO on SAP HANA The company has set an RPO of 15 minutes and an RTO of 4 hours. The production SAP HANA database is running on a physical appliance that has x86 architecture. The appliance has 1 TB of memory and the SAP HANA global allocation limit is set to 768 GB. The SAP application servers are running as VMs on VMware and they sto
A. For the SAP HANA database change the log backup frequency to 5 minutes Move the data and log backups to Amazon S3 by using the AWS CLI or AWS DataSync Launch the SAP HANA database For the SAP application servers, export the VMs as AMis by using the VM import/Export feature from AWS For NFS file shares/sapmnt and usr-sap/trans/ establish realtime synchronization from DataSync to Amazon Elastic File System (Amazon EFS)
B. For the SAP HANA database change the log backup frequency to 5 minutes Move the data and log backups to Amazon S3 by using AWS Storage Gateway File Gateway For the SAP application servers export the VMs as AMIs by using the VM Import'Export feature from AWS For NFS file shares/sapmnt and 'usr saplrans establish realtime synchronization from AWS DataSync to Amazon Elastic Foe System (Amazon EFS)
C. For the SAP HANA database SAP application servers and NFS Me shares use CloudEndure Disaster Recovery to replicate the data continuously from on premises to AWS Use CloudEndure Disaster Recovery to launch target instances in the event of a disaster
D. For the SAP HANA database use a smaller SAP certified Amazon EC2 instance Use SAP HANA system replication with ASYNC replication mode to replicate the data continuously from on premises to AWS For the SAP application servers use CloudEndure Disaster Recovery for continuous data replication For NFS file shares sapmnt and
عرض الإجابة
اجابة صحيحة: D
السؤال #7
A company is hosting an SAP HANA database on AWS. The company is automating operational tasks including backup and system refreshes. The company wants to use SAP HANA Studio to perform data backup of an SAP HANA tenant database to a backint interface. The SAP HANA database is running in multi-tenant database container (MDO mode. The company receives the following error message during an attempt to perform the backup. What should an SAP solutions architect do to resolve this issue?
A. Set the execute permission for AWS Backint agent binary aws-backint-agent and for the launcher script aws-backint-agent-launcher sh in the installation directory
B. Verify the installation steps Create symbolic links (symlinks)
C. Ensure that the cataiog_backup_using_backint SAP HANA parameter is set to true Ensure that the data_backup_parameter_file and log_backup_parameter_file parameters have the correct path location in the global ini file
D. Add the SAP HANA system to SAP HANA Studio Select multiple container mode and then try to initiate the backup again
عرض الإجابة
اجابة صحيحة: D
السؤال #8
A company is hosting its SAP workloads on AWS An SAP solutions architect is designing high availability architecture for the company's production SAP S4HANA and SAP BW-4HANA workloads These workloads have the following requirements. (cid:127) Redundant SAP application servers that consist of a primary application server (PAS) and an additional application server (AAS) (cid:127) ASCS and ERS instances that use a failover cluster (cid:127) Database high availability with a primary DB Instance and a secondary
A. Deploy ASCS and ERS cluster nodes in different subnets within the same Availability Zone Deploy the PAS instance and AAS instance in different subnets within the same Availability Zone Deploy the primary DB instance and secondary DB instance m different subnets within the same Availability Zone Deploy all the components in the same VPC
B. Deploy ASCS and ERS duster nodes m different subnets within the same Availability Zone Deploy the PAS instance and AAS instance in different subnets within the same Availably Zone Deploy the primary DB instance and secondary DB instance m different subnets within the same Availability Zone Deploy the ASCS instance PAS instance and primary DB instance in one VPC Deploy the ERS instance AAS instance and secondary DB instance in a different VPC
C. Deploy ASCS and ERS cluster nodes in different subnets across two Availability Zones Deploy the PAS instance and AAS instance m different subnets across two Availability Zones Deploy the primary DB instance and secondary DB instance in different subnets across two Availability Zones Deploy all the components m the same VPC
D. Deploy ASCS and ERS cluster nodes in different subnets across two Availability Zones Deploy the PAS instance and AAS instance m different subnets across two
E. Availability Zones Deploy the primary DB instance and secondary DB instance in different subnets across two Availability Zones Deploy the ASCS instance PAS instance and primary DB instance in one VPC Deploy the ERS instance AAS instance and secondary DB instance in a different VPC
عرض الإجابة
اجابة صحيحة: C
السؤال #9
An SAP solutions architect is designing an SAP HANA scale-out architecture for SAP Business Warehouse (SAP BW) on SAP HANA on AWS. The SAP solutions architect identifies the design as a three-node scale out deployment of x1e 32xlarge Amazon EC2 instances The SAP solutions architect must ensure that the SAP HANA scale-out nodes can achieve the lowlatency and high-throughput network performance that are necessary for node-to-node communication Which combination of steps should the SAP solutions architect take
A. Create a cluster placement group Launch the instances into the cluster placement group
B. Create a spread placement group Launch the instances into the spread placement group
C. Create a partition placement group Launch the instances into the partition placement group
D. Based on the operating system version verify that enhanced networking is enabled on all the nodes
E. Switch to a different instance family that provides network throughput that is greater than 25 Gbps
عرض الإجابة
اجابة صحيحة: A
السؤال #10
A company is planning to migrate its on-premises SAP ERP Central Component (SAP ECC) system on SAP HANA to AWS Each month the system experiences two peaks in usage. The first peak is on the 21st day of the month when the company runs payroll. The second peak is on the last day of the month when the company processes and exports credit data Both peak workloads are of high importance and cannot be rescheduled The current SAP ECC system has six application servers an of a similar size. During normal operation
A. Four Reserved Instances and two Spot Instances
B. Six On-Demand Instances
C. Six Reserved Instances
D. Four Reserved Instances and two On-Demand Instances
عرض الإجابة
اجابة صحيحة: D
السؤال #11
A company needs to migrate its critical SAP workloads from an on-premises data center to AWS The company has a few source production databases that are 10 TB or more in size The company wants to minimize the downtime for this migration As part of the proof of concept the company used a low-speed high-latency connection between its data center and AWS During the actual migration the company wants to maintain a consistent connection that delivers high bandwidth and low latency. The company also wants to add a
A. Set up one AWS Direct Connect connection for connectivity between the on-premises data center and AWS Add an AWS Site-to-Site VPN connection as a backup to the Direct Connect connection
B. Set up an AWS Direct Connect gateway with multiple Direct Connect connections that use a link aggregation group (LAG) between the on-premises data center and AWS
C. Set up Amazon Elastic fie System (Amazon EPS) file system storage between the on-premises data center and AWS Configure a cron job to copy the data into this EFS mount Access the data in the EFS file system from the target environment
D. Set up two redundant AWS Site-to-Site VPN connections for connectivity between the on-premises data center and AWS
عرض الإجابة
اجابة صحيحة: A
السؤال #12
A company hosts its SAP NetWeaver workload on SAP HANA m the AWS Cloud The SAP NetWeaver application is protected by a cluster solution that uses Red Hat Enterprise Linux High Availability Add- On The duster solution uses an overlay IP address to ensure that the high availability cluster is still accessible during failover scenarios. An SAP solutions architect needs to facilitate the network connection to this overlay IP address from multiple locations These locations include more than 25 VPCs other AWS Reg
A. Use VPC peering between the VPCs to route traffic between them
B. Use AWS Transit Gateway to connect the VPCs and on-premises networks together
C. Use a Network Load Balancer to route connections to various targets within VPCs
D. Deploy a Direct Connect gateway to connect the Direct Connect connection over a private VIF to one or more VPCs in any accounts
عرض الإجابة
اجابة صحيحة: B
السؤال #13
A company is planning to migrate its on-premises SAP applications to AWS. The applications are based on Windows operating systems A file share stores the transport directories and third party application data on the network attached storage of the company's on-premises data center. The company's plan is to lift and shift the SAP applications and the file share to AWS. The company must follow AWS best practices for the migration Which AWS service should the company use to host the transport directories and t
A. Amazon Elastic Block Store (Amazon EBS)
B. AWS Storage Gateway
C. Amazon Elastic File System (Amazon EFS)
D. Amazon FSx for Windows File Server
عرض الإجابة
اجابة صحيحة: D
السؤال #14
A company is running its SAP workload on AWS The company's security team has implemented the following requirements (cid:127) All Amazon EC2 instances for SAP must be SAP certified instance types - Encryption must be enabled for all Amazon S3 buckets and Amazon Elastic Block Store (Amazon EBS) volumes (cid:127) AWS CloudTrail must be activated (cid:127) SAP system parameters must be compliant with business rules (cid:127) Detailed monitoring must be enabled for all instances The company wants to develop an
A. Use AWS AppConfig to model configuration data in an AWS Systems Manager Automation runbook Schedule this Systems Manager Automation runbook to monitor for compliance with all the requirements integrate AWS AppConfig with Amazon CloudWatch for notification purposes
B. Use AWS Config managed rules to monitor for compliance with all the requirements Use Amazon EventBridge (Amazon CloudWatch Events) and Amazon Simple Notification Service (Amazon SNS) for email notification when a resource is flagged as noncompliant
C. Use AWS Trusted Advisor to monitor for compliance with all the requirements Use Trusted Advisor preferences for email notification when a resource is flagged as noncompliant
D. Use AWS Config managed rules to monitor for compliance with the requirements except for the SAP system parameters Create AWS Config custom rules to validate the SAP system parameters Use Amazon EventBridge (Amazon CloudWatch Events) and Amazon Simple Notification Sen/ice (Amazon SNS) for email notification when a resource is flagged as noncompliant
عرض الإجابة
اجابة صحيحة: D
السؤال #15
A company is using SAP NetWeaver with Java on AWS The companwy has upwdated itws genera.tioVn of AmCazon EEC2 insptances lto uthe mosst rec.enti geoneration of EC2 instances When the company tries to start SAP the startup fails The tog indicates that the SAP license expired Of is not valid. What is the reason for this issue?
A. The instance ID changed as part of the EC2 generation change
B. The instance's hypervisor changed from Xen to Nitro
C. The SAP Java Virtual Machine (SAP JVM) is not compatible with the new instance type
D. An EC2 generation change is not supported for SAP Java-based systems
عرض الإجابة
اجابة صحيحة: B
السؤال #16
An SAP solutions architect is leading the SAP basis team for a company. The company's SAP landscape includes SAP HANA database instances for the following systems sandbox development quality assurance test {QAT} system performance test (SPT) and production. The sandbox development and OAT systems are running on Amazon EC2 On-Demand Instances. The SPT and production systems are running on EC2 Reserved Instances All the EC2 instances are using Provisioned IOPS SSO (K)2) Amazon Elastic Block Store (Amazon EBS)
A. Use a Spot Fleet instead of the Reserved Instances and On-Demand Instances
B. Use Amazon EventBridge (Amazon CloudWatch Events) and Amazon CloudWatch alarms to stop the development and sandbox EC2 instances from 7 PM every night to 7 AM the next day
C. Make the SAP basis team available 24 hours a day 7 days a week to use the AWS CLi to stop and start the development and sandbox EC2 instances manually
D. Change the EBS volume type to Throughput Optimized HDD (sti) for the /hana/data and nana, log file systems for the production and non-production SAP HANA databases
عرض الإجابة
اجابة صحيحة: B
السؤال #17
A company is implementing SAP HANA on AWS According 10 the company's security policy SAP backups must be encrypted Only authorized team members can have the ability to decrypt the SAP backups What is the MOST operationally efficient solution that meets these requirements?
A. Configure AWS Backint Agent for SAP HANA to create SAP backups in an Amazon S3 bucket After a backup is created encrypt the backup by using client-side encryption Share the encryption key with authorized team members only
B. Configure AWS Backint Agent for SAP HANA to use AWS Key Management Service (AWS KMS) for SAP backups Create a key policy to grant decryption permission to authorized team members only
C. Configure AWS Storage Gateway to transfer SAP backups from a file system to an Amazon S3 bucket Use an S3 bucket policy to grant decryption permission to authorized team members only
D. Configure AWS Backint Agent for SAP HANA to use AWS Key Management Service (AWS KMS) for SAP backups Grant object ACL decryption permission to authorized team members only
عرض الإجابة
اجابة صحيحة: B
السؤال #18
A data analysis company has two SAP landscapes that consist of sandbox development QA, preproduction and production servers. One landscape is on Windows and the other landscape is on Red Hat Enterprise Linux. The servers reside in a room m a building that other tenants share. An SAP solutions architect proposes to migrate the SAP applications to AWS The SAP solutions architect wants to move the production backups to AWS and wants to make the backups highly available to restore >n case of unavailability of
A. Take a backup of the production servers Implement an AWS Storage Gateway Volume Gateway Create file shares by using the Storage Gateway Volume Gateway Copy the backup files to the file shares through NFS and 9MB
B. Take a backup of the production servers Send those backups to tape drives implement an AWS Storage Gateway Tape Gateway Send the backups to Amazon S3 Standard-Infrequent Access (S3 Standard-IA) through the S3 console Move the backups immediately to S3 Glacier Deep Archive
C. Implement a third-party tool to take images of the SAP application servers and database server Take regular snapshots at 1-hour intervals send the snapshots to Amazon S3 Glacier directly through the S3 Glacier console Store the same images in different S3 buckets in different AWS Regions
D. Take a backup of the production servers Implement an Amazon S3 File Gateway Create file shares by using the S3 File Gateway Copy the backup files lo the file shares through NFS and SMB Map backup files directly to Amazon S3 Configure an S3 Lifecycle policy to send the backup files to S3 Glacier based on the company's data retention policy
عرض الإجابة
اجابة صحيحة: D
السؤال #19
A company's basis administrator is planning to deploy SAP on AWS m Linux. The basis administrator must set up the proper storage to store SAP HANAdata and log volumes. Which storage options should the basis administrator choose to meet these requirements? (Select TWO.)
A. Amazon Elastic Block Store (Amazon EBS) Throughput Optimized HDD (st1)
B. Amazon Elastic Block Store (Amazon EBS) Provisioned IOPS SSD (io1, k>2)
C. Amazon S3
D. Amazon Elastic File System (Amazon EFS>
E. Amazon Elastic Block Store (Amazon EBS) General Purpose SSD (gp2 gp3)
عرض الإجابة
اجابة صحيحة: B
السؤال #20
A company that has SAP workloads on premises plans to migrate an SAP environment to AWS. The company is new to AWS and has no poor setup. The company has the following requirements - The application server and database server must be placed in isolated network configurations (cid:127) SAP systems must be accessible to the on-premises end users over the internet (cid:127) The cost of communications between the application server and the database server must be minimized Which combination of steps should an S
A. Configure a Network Load Balancer for incoming connections from end users
B. Set up an AWS Site-to-Site VPN connection between the company's on-premises network and AWS
C. Separate the application server and the database server by using different VPCs
D. Separate the application server and the database server by using different subnets and network security groups within the same VPC
E. Set up an AWS Direct Connect connection with a private VIF between the company's on-premises network and AWS
عرض الإجابة
اجابة صحيحة: B

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف: