لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت

السؤال #1
Both Switch-1 and Switch-2 redistribute RIP routes into OSPF. The network administrator wants routers in Area 1 to receive the redistributed routes from Switch-1 but not from Switch-2. What should the administrator do to achieve this goal?
A. Configure Area 1 as a stub area, with no summaries on Switch-2
B. Configure Area 1 as a stub area, and import the routes with a low metric on Switch-2
C. Configure Area 1 as a Not So Stubby Area (NSSA) on all routing devices in Area 1
D. Configure a subnet range for Area 1 on Switch-2, and set the no-advertise optio
عرض الإجابة
اجابة صحيحة: A
السؤال #2
The network administrator wants to summarize routes as much as possible in between areas. What is the correct range to specify for the router OSPF Area 2 command on Switch-2?
A. 10
B. 10
C. 10
D. 10
عرض الإجابة
اجابة صحيحة: A
السؤال #3
Network administrators want to gain insight into network utilization, traffic patterns, and the types of applications in use across the network over the long term. Which technology can help them achieve this goal?
A. RMON
B. sFlow
C. SNMP traps
D. DiffServ
عرض الإجابة
اجابة صحيحة: D
السؤال #4
A network administrator plans to apply DSCP 46 to all traffic on a port. What is required for this configuration to work?
A. The port has trust set to default
B. A DSCP map that sets 46 to a priority value
C. The port has trust set to DSCP
D. A QoS policy selects traffic with DSCP 46
عرض الإجابة
اجابة صحيحة: C
السؤال #5
What is the minimum requirement for a device to pass local MAC authentication (LMA) on an AOS-Switch?
A. The device MAC address matches a default MAC group, which is enabled but not necessarily associated with a profile
B. The device MAC address matches a MAC group, address, OUI, or range that is associated with an LMA profile
C. The device MAC address matches a default MAC group that is associated with an LMA profile
D. The device MAC address matches a configured MAC group, address, OUI, or range, which is not necessarily associated with a profile
عرض الإجابة
اجابة صحيحة: B
السؤال #6
What is a reason to implement PIM-DM as opposed to PIM-SM?
A. to control exactly which multicast groups are routed through the network
B. to permit a higher density of RP routers in the network core
C. to conserve bandwidth over WAN links
D. to use on high-bandwidth routed connections
عرض الإجابة
اجابة صحيحة: B
السؤال #7
A company starts to have issues with too many rules in the dynamic ACLs applied to AOS-Switch ports. Administrators decide to remove some of the common rules from the dynamic ACLs and enforce them in an ACL applied to the users’ VLAN instead. What is one rule that administrators should keep in mind to ensure that the new ACLs control traffic as they expect?
A. ACLs applied to VLANs cannot control ICMP traffic, do the dynamic ACLs must include the ICMP rules
B. Administrators should add an explicit deny at the end of the dynamic ACLs, so traffic will hit VLAN ACL
C. Traffic must be permitted by both the dynamic ACL and the VLAN ACL in order to be permitted
D. If a port supports multiple clients, every dynamic ACL applied to one client filters traffic for all client
عرض الإجابة
اجابة صحيحة: C
السؤال #8
AOS-Switches authenticate guests to ClearPass with captive portal. An administrator notices that some guests are unable to reach the captive portal page. What will resolve this issue?
A. Permit DNS on the ClearPass Portal
B. Permit DHCP on the ClearPass Portal
C. Permit HTTP or HTTPS on the ClearPass Portal
D. Permit Allow All MAC-Auth on the ClearPass Porta
عرض الإجابة
اجابة صحيحة: D
السؤال #9
A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches. What should be set up for this purpose?
A. an SNMP trap
B. an RMON alarm
C. an IP SLA profile
D. an auto-config server
عرض الإجابة
اجابة صحيحة: B
السؤال #10
Refer to the exhibits. Exhibit 2 The network administrator configures the commands shown in Exhibit 2. Which mismatch will cause an issue?
A. the mismatch between the key IDs specified in chain10 and chain11 on Switch-1
B. the mismatch between the key-strings in the chains for VLAN 10 and VLAN 11 on Switch-1
C. the mismatch between the chain names associated with VLAN 11 on Switch-1 and on Switch-3
D. the mismatch between the key-strings associated with VLAN 10 on Switch-1 and on Switch-2
عرض الإجابة
اجابة صحيحة: C

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف: