لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
Which two of the following will be used for ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)
A. Inter-Tier interface on the Tier-0 gateway
B. Tier-0 Uplink interface
C. Downlink Interface for the Tier-0 DR
D. Tier-1 SR Router Port
E. Downlink Interface for the Tier-1 DR
عرض الإجابة
اجابة صحيحة: BC
السؤال #2
An NSX administrator has deployed a single NSX Manager node and will be adding two additional nodes to form a 3-node NSX Management Cluster for a production environment. The administrator will deploy these two additional nodes and Cluster VIP using the NSX UI. What two are the prerequisites for this configuration? (Choose two.)
A. The cluster configuration must be completed using API
B. All nodes must be in the same subnet
C. All nodes must be in separate subnets
D. A compute manager must be configured
E. NSX Manager must reside on a Windows Server
عرض الإجابة
اجابة صحيحة: BD
السؤال #3
What should an NSX administrator check to verify that VMware Identity Manager integration is successful?
A. From the NSX UI the status of the VMware Identity Manager Integration must be “Enabled”
B. From the NSX CLI the status of the VMware Identity Manager Integration must be “Configured”
C. From VMware Identity Manager the status of the remote access application must be green
D. From the NSX UI the URI in the address bar must have “local=false” part of it
عرض الإجابة
اجابة صحيحة: A
السؤال #4
[VMware-2V0-41.19-1.0/xmlfile-3_1.jpg] Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
A. Reverse NAT
B. SNAT
C. 1:1 NAT
D. DNAT
عرض الإجابة
اجابة صحيحة: D
السؤال #5
As part of an organization’s IT security compliance requirement, NSX Manager must be configured for 2FA (two-factor authentication). What should an NSX administrator have ready before the integration can be configured?
A. Active Directory LDAP integration with ADFS
B. VMware Identity Manager with NSX added as a Web Application
C. VMware Identity Manager with an OAuth Client added
D. Active Directory LDAP integration with OAuth Client added
عرض الإجابة
اجابة صحيحة: B
السؤال #6
Which two are supported by L2 VPN clients? (Choose two.)
A. NSX Autonomous Edge
B. NSX Edge
C. NSX for vSphere Edge
D. 3rd party Hardware VPN Device
عرض الإجابة
اجابة صحيحة: BD
السؤال #7
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time. Which CLI command disables the nsxcli time out value on NSX Manager?
A. set cli-timeout 0
B. set cli-timeout enabled
C. set cli-timeout disabled
D. set cli-timeout 1
عرض الإجابة
اجابة صحيحة: A
السؤال #8
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
A. virsh dumpxml | grep interfaceid
B. virsh get-interface
C. virsh show | grep interfaceid
D. virsh list-interface
عرض الإجابة
اجابة صحيحة: A
السؤال #9
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
A. ifconfig
B. tcpdump
C. debug
D. ipconfig
عرض الإجابة
اجابة صحيحة: A
السؤال #10
An NSX administrator is configuring the KVM hypervisor host as a transport node and wants to apply the Failover Order as a NIC teaming policy. Which profile allows the administrator to configure the NIC Teaming policy as Failover Order?
A. N-VDS/VDS Profile
B. Transport Node Profile
C. Host Switch Profile
D. Uplink Profile
عرض الإجابة
اجابة صحيحة: D
السؤال #11
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)
A. net-dvs
B. esxcfg-nics -l
C. esxcli network ip interface ipv4 get
D. esxcfg-vmknic -l
E. esxcli network nic list
عرض الإجابة
اجابة صحيحة: C
السؤال #12
A security administrator needs to configure a firewall rule based on the domain name of a specific application. Which field in a distributed firewall rule does the administrator configure?
A. Policy
B. Profile
C. Service
D. Source
عرض الإجابة
اجابة صحيحة: B
السؤال #13
An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing. Which failover detection protocol must be used to meet this requirement?
A. Beacon Probing (BP)
B. Host Standby Router Protocol (HSRP)
C. Bidirectional Forwarding Detection (BFD)
D. Virtual Router Redundancy Protocol (VRRP)
عرض الإجابة
اجابة صحيحة: C
السؤال #14
Which two commands are used to query the arp-table of a logical switch? (Choose two.)
A. get logical-switch arp-table
B. get logical-switch arp-table
C. get logical-switch arp-table
D. get logical-switch arp-table
E. get logical-switch arp-table
عرض الإجابة
اجابة صحيحة: AB
السؤال #15
What is the VMware recommended way to deploy a virtual NSX Edge Node?
A. Through the NSX UI
B. Through automated or interactive mode using an ISO
C. Through the vSphere Web Client
D. Through the OVF command line tool
عرض الإجابة
اجابة صحيحة: B
السؤال #16
An NSX administrator is applying QoS to guarantee bandwidth for critical production workloads. Which three actions must be taken? (Choose three.)
A. Edit the exported JSON file
B. Export transport node NIOC profile
C. Create a QoS segment profile
D. Specify QoS parameters
E. Change Segment QoS profile
F. Upload the JSON file and apply configuration
عرض الإجابة
اجابة صحيحة: BCD
السؤال #17
A customer is planning deployment of a third-party OpenStack application. Which is used to grant permissions to the application on NSX Manager?
A. Guest Identity
B. Cloud Identity
C. Principal Identity
D. API Identity
عرض الإجابة
اجابة صحيحة: D
السؤال #18
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
A. ifconfig
B. tcpdump
C. debug
D. ipconfig
عرض الإجابة
اجابة صحيحة: A
السؤال #19
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN-backed logical switch?
A. Loopback Router Port
B. VLAN Uplink
C. Service interface
D. Downlink interface
عرض الإجابة
اجابة صحيحة: C
السؤال #20
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node. Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
A. Port Mirroring
B. IPFIX
C. Activity Monitoring
D. Switch Visualization
عرض الإجابة
اجابة صحيحة: D
السؤال #21
What is VMware’s recommendation for the minimum MTU requirements when planning an NSX deployment?
A. MTU should be set to 1700 or greater across the data center network including inter-data center connections
B. MTU should be set to 1500 or less only on inter-data center connections
C. Configure Path MTU Discovery and rely on fragmentation
D. MTU should be set to 1550 or less across the data center network including inter-data center connections
عرض الإجابة
اجابة صحيحة: A
السؤال #22
Which two of the following will be used for ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)
A. Inter-Tier interface on the Tier-0 gateway
B. Tier-0 Uplink interface
C. Downlink Interface for the Tier-0 DR
D. Tier-1 SR Router Port
E. Downlink Interface for the Tier-1 DR
عرض الإجابة
اجابة صحيحة: BE
السؤال #23
When collecting support bundles through NSX Manager, which files should be excluded for potentially containing sensitive information?
A. Audit Files
B. Core Files
C. Management Files
D. Controller Files
عرض الإجابة
اجابة صحيحة: A
السؤال #24
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
A. Reverse NAT
B. SNAT
C. 1:1 NAT
D. DNAT
عرض الإجابة
اجابة صحيحة: D
السؤال #25
Which VPN type must be configured before enabling a L2VPN?
A. SSL-based IPSec VPN
B. Route-based IPSec VPN
C. Port-based IPSec VPN
D. Policy-based IPSec VPN
عرض الإجابة
اجابة صحيحة: B
السؤال #26
An administrator has been tasked with implementing the SSL certificates for the NSX Manager Cluster VIP. Which is the correct way to implement this change?
A. Send an API call to https:///api/vl/cluster/api-certificate?action=set_cluster_certificate&certificate_id=
B. Send an API call to https:///api/vl/node/services/http?action=apply_certificate&certificate_id=
C. SSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate node install
D. SSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate vip install
عرض الإجابة
اجابة صحيحة: D

View The Updated Vmware Exam Questions

SPOTO Provides 100% Real Vmware Exam Questions for You to Pass Your Vmware Exam!

Get Vmware Practice Test

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.