As shown in the figure, VLAN aggregation is deployed in a switching network, where Sub-VLAN 10 and Sub-VLAN 20 are added to Super-VLAN 100. If PC1 and PC2, PC1 and PC3 are to be able to communicate with each other, which of the following descriptions about the L3 Switch interface type and the VLAN that should be allowed is correct?
A. GE0/0/1 and GE0/0/2 are both access ports, and the PVID is set to VLAN10
B. GE0/0/1 is a Trunk port, allowing VLAN 10 and VLAN 20 to pass; GE0/0/2 is an Access port, and the PVID is set to VLAN 10correct
C. GE0/0/1 is an access port, and its PVID is set to VLAN 10; GE0/0/2 is a trunk port, and VLAN 10 is allowed
D. Both GE0/0/1 and GE0/0/2 are Trunk ports, and only VLAN 10 is allowed to pass