لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
You are currently running BGP-based VPLS and Layer 3 VPNs. You are asked to consolidate the services and deploy EVPN to replace the VPLS and Layer 3 VPN deployments. Which two EVPN route types will achieve this goal? (Choose two.)
A. Type 5
B. Type 4
C. Type 2
D. Type 7
عرض الإجابة
اجابة صحيحة: AC
السؤال #2
Click the Exhibit button. Routers R1, R2, and R3 have set protocols isis interface all configured and no other set protocols isis configuration Referring to the exhibit, which two statements are true? (Choose two.)
A. The R2-R3 link will form a Level 1 and Level 2 adjacency
B. The R1-to-R2 link will only form a Level 2 adjacency
C. The R1-to-R2 link will form a Level 1 and Level 2 adjacency
D. The R2-R3 link will only form a Level 1 adjacency
عرض الإجابة
اجابة صحيحة: AC
السؤال #3
Click the Exhibit button Referring to the exhibit, why are R1 and R2 not exchanging routes between their VPNs?
A. The route targets are not property configured
B. The IP addresses in the BGP configuration must be in the same subnet
C. The interfaces unit numbers must be the same on both sides
D. The route distinguishers are not properly configured
عرض الإجابة
اجابة صحيحة: D
السؤال #4
In a carrier-of-carrier VPN model, which type of network layer reachability information is used for the MP-BGP signaling between CE and PE routers?
A. flow
B. labeled-unicast
C. unicast
D. inet-vpn
عرض الإجابة
اجابة صحيحة: D
السؤال #5
Click the Exhibit button Referring to the exhibit, when building an interprovider VPN Option C between AS65100 and AS65200, which two parameters must be configured on the EBGP connection between PEI and PE2? (Choose two.)
A. family inet-vpn unicast
B. multihop
C. family inet labeled-unicast
D. multipath
عرض الإجابة
اجابة صحيحة: AB
السؤال #6
The network team will be performing maintenance on R3. The maintenance window requires a reboot of router R3. You want to gracefully move traffic away from R3 until after the reboot. In this scenario, how would you solve this problem?
A. Configure the set protocols isis interface all level 1 hold-time 300 parameter, then reboot the router
B. Configure the set protocols isis overload parameter, then commit the configuration
C. Configure the set protocols isis spf-options delay 300 parameter, then reboot the router
D. Configure the set protocols isis interface all level 1 hello-interval 300 parameter, then reboot the router
عرض الإجابة
اجابة صحيحة: B
السؤال #7
Click the Exhibit button. Referring to the exhibit, RR1-RR4 are route reflectors. Which three routers would RR1 need to peer with if the no-client-reflect parameter has been configured? (Choose three.)
A. R2
B. R5
C. RR4
D. R6
E. Rl
عرض الإجابة
اجابة صحيحة: ACE
السؤال #8
Which statement is correct regarding BGP route reflectors?
A. The route reflectors must have a private AS number
B. The route reflectors must have an EBGP peering session between each other
C. The route reflectors must have a cluster ID configured
D. The route reflectors must have a different AS number than the clients
عرض الإجابة
اجابة صحيحة: C
السؤال #9
Click the Exhibit button. Referring to the exhibit, the Layer 2 VPN between PE-1 and PE-2 is not functioning properly What must you do to solve the problem?
A. Set the remote site identifier to 3
B. Set the local site identifier to 3
C. Set the local site identifier to 1
D. Set the remote site identifier to 5
عرض الإجابة
اجابة صحيحة: B
السؤال #10
Which two routes use a proper route distinguisher? (Choose two.)
A. 192
B. 12345:12:10
C. 192
D. 12345:10
عرض الإجابة
اجابة صحيحة: AB
السؤال #11
Click the Exhibit button. After an acquisition, a customer experiences OSPF flooding during network consolidation and the router is experiencing performance problems. Referring to the exhibit, which OSPF feature set should you add or modify to increase capacity?
A. traffic engineering
B. OSPF authentication
C. Bidirectional Forwarding Detection
D. database protection
عرض الإجابة
اجابة صحيحة: D
السؤال #12
Click the Exhibit button. Referring to the exhibit, which statement is correct?
A. IP address 192
B. Four routes have been leaked from the Level 2 area to the Level 1 area
C. The path to IP address 192
D. Rl has two Level 2 adjacencies and one Level 1 adjacency to other routers
عرض الإجابة
اجابة صحيحة: A
السؤال #13
You want to add a new OSPF area to your existing OSPF network, however, this area will not be directly connected to Area 0. Which feature would you use to complete this task?
A. a routing policy
B. not-so stubby area
C. virtual link
D. Type 10 LSA
عرض الإجابة
اجابة صحيحة: C
السؤال #14
Click the Exhibit button. Referring to the exhibit, you have multiple Layer 3 VPNs established in your network. You are asked to ensure that PE-4 allows CE-2 in VPN 1 to communicate with CE-1 in VPN 3. Which two statements are correct in this scenario? (Choose two.)
A. Use a BGP export policy to share the appropriate VRF routes
B. Use the auto-export feature to share the appropriate VRF routes
C. Use a BGP import policy to share the appropriate VRF routes
D. Use rib-groups to share the appropriate VRF routes
عرض الإجابة
اجابة صحيحة: AC
السؤال #15
Click the Exhibit button Referring to the exhibit, what must be added to the existing configuration to ensure that per-prefix load balancing occurs?
A. multihop
B. keep all
C. multipath
D. family inet unicast
عرض الإجابة
اجابة صحيحة: C
السؤال #16
With which two elements is a VRF table populated? (Choose two.)
A. Routes received from remotely connected CE sites
B. Routes received from directly connected CE sites
C. Routes received from P routers with acceptable MP-BGP attributes
D. Routes received from PE routers with acceptable MP-BGP attributes
عرض الإجابة
اجابة صحيحة: BD
السؤال #17
According to Juniper Networks, what are three methods of scaling Layer 2 VPNs? (Choose three.)
A. inbound route filters
B. route reflection
C. outbound route filters
D. filter-based forwarding
E. BGP route refresh
عرض الإجابة
اجابة صحيحة: ABC

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.