You have a server named Server1 that runs Windows Server.You install a custom app named App1 that is accessed by using TCP port 52310.Users report that they cannot access App1.You confirm that App1 is running on Server1.You need to ensure that the users can access App1. The solution must only provide access to App1 on Server1.What should you do in Windows Defender Firewall with Advanced Security?

Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains a user named User1.You deploy a read-only domain controller (RODC) named RODC1.You need to ensure that User1 is a local administrator on RODC1. The solution must use the principle of least privilege.What should you use?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a server named Server1 that runs Windows Server.You need to ensure that only specific applications can modify the data in protected folders on Server1.Solution: From Virus & threat protection, you configure Controlled folder access.Does this meet the goal?

Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains two servers named Server1 and Server2 that run Windows Server.You need to ensure that you can manage Server2 by using the Computer Management console from Server1.The solution must use the principle of least privilege.Which two Windows Defender Firewall with Advanced Security rules should you enable on Server2? Each correct answer presents part of the solution.Note: Each correct selection is worth one point.

You have 50 on-premises servers that run Windows Server. You have an Azure subscription that contains 50 virtual machines that run Windows Server.

You have a server named Server1 that runs Windows Server.You install a custom app named App1 that is accessed by using TCP port 52310.Users report that they cannot access App1.You confirm that App1 is running on Server1.You need to ensure that the users can access App1. The solution must only provide access to App1 on Server1.What should you do in Windows Defender Firewall with Advanced Security?

Your company uses Storage Spaces Direct.You need to view the available storage in a Storage Space Direct storage pool.What should you use?

Your on-premises network contains an Active Directory Domain Services (AD DS) domain. The domain contains a server named Server1 that hosts an app named App1. App1 uses Active Directory authentication.You have a Microsoft Entra tenant that contains a user named User1.You deploy Microsoft Entra Connect sync and configure password synchronization.User1 fails to authenticate to App1.You need to ensure that User1can authenticate to App1.What should you do?

You have an Azure subscription. The subscription contains a virtual machine named VM1 that runs Windows Server. The subscription contains the storage accounts shown in the following table.You plan to enable boot diagnostics for VM1.You need to configure storage for the boot diagnostics logs and snapshots.Which storage account should you use?

You have 100 Azure virtual machines that run Windows Server. The virtual machines are onboarded to Microsoft Defender for Cloud. You need to shut down a virtual machine automatically if Microsoft Defender for Cloud generates the "Antimalware disabled in the virtual machine" alert for the virtual machine. What should you use in Microsoft Defender for Cloud?

You have an Active Directory Domain Services (AD DS) domain. The domain contains a server named Server1 that runs Windows Server.You need to prevent the registration of specific COM objects on Server1.What should you use?

Your on-premises network contains an Active Directory Domain Services (AD DS) domain. The domain contains a server named Server1 that hosts an app named App1. App1 uses Active Directory authentication.You have a Microsoft Entra tenant that contains a user named User1.You deploy Microsoft Entra Connect sync and configure password synchronization.User1 fails to authenticate to App1.You need to ensure that User1can authenticate to App1.What should you do?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a server named Server1 that runs Windows Server.You need to ensure that only specific applications can modify the data in protected folders on Server1.Solution: From App & browser control, you configure the Exploit protection settings.Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a failover cluster named Cluster1 that hosts an application named App1.The General tab in App1 Properties is shown in the General exhibit. (Click the General tab.)The Failover tab in App1 Properties is shown in the Failover exhibit. (Click the Failover tab.)Server1 shuts down unexpectedly.You need to ensure that when you start Server1, App1 continues to run on Server2.Solution: You pause the Server1 node in Cluster1 and then start Server1.Does this meet the goal?

You have an on-premises IIS web server that hosts several .NET applications.You plan to migrate the applications to Azure App Service. The applications will NOT be containerized.What should you use to perform the migration?

You have a server named Server1 that runs the Remote Desktop Session Host role service. Server1 has five custom applications installed.

Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains a user named User1.You deploy a read-only domain controller (RODC) named RODC1.You need to ensure that User1 is a local administrator on RODC1. The solution must use the principle of least privilege.What should you use?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that mightmeet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a server named Server1 that runs Windows Server.You need to ensure that only specific applications can modify the data in protected folders on Server1.Solution: From Virus & threat protection, you configure Controlled folder access.Does this meet the goal?

You have an Active Directory Domain Services (AD DS) domain. The domain contains a server named Server1 that runs Windows Server.You need to prevent the registration of specific COM objects on Server1.What should you use?

You have an Active Directory Domain Services (AD DS) domain. The domain contains a server named Server1 that runs Windows Server.You need to prevent the registration of specific COM objects on Server1.What should you use?

You have an Azure subscription that has Microsoft Defender for Cloud enabled.You have 50 Azure virtual machines that run Windows Server.You need to ensure that any security exploits detected on the virtual machines are forwarded to Defender for Cloud.Which extension should you enable on the virtual machines?

You have an Azure virtual machine named VM1.You enable Microsoft Defender SmartScreen on VM1.You need to ensure that the SmartScreen messages displayed to users are logged.What should you do?

You have a management group named MG1 that contains an Azure subscription named Sub1. Sub1 contains the resources shown in the following table.You need to enable Microsoft Defender for Servers.From the Azure portal, on which two resources can you enable Defender for Servers? Each correct answer presents a complete solution.Note: Each correct selection is worth one point.

You have a server named Server1 that runs Windows Server.You install a custom app named App1 that is accessed by using TCP port 52310.Users report that they cannot access App1.You confirm that App1 is running on Server1.You need to ensure that the users can access App1. The solution must only provide access to App1 on Server1.What should you do in Windows Defender Firewall with Advanced Security?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a server named Server1 that runs Windows Server.You need to ensure that only specific applications can modify the data in protected folders on Server1.Solution: From Virus & threat protection, you configure Tamper ProtectionDoes this meet the goal?

You have a Microsoft Sentinel deployment and 100 Azure Arc-enabled on-premises servers. All the Azure Arc-enabled resources are in the same resource group.You need to onboard the servers to Microsoft Sentinel. The solution must minimize administrative effort.What should you use to onboard the servers to Microsoft Sentinel?

Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains a user named User1.You deploy a read-only domain controller (RODC) named RODC1.You need to ensure that User1 is a local administrator on RODC1. The solution must use the principle of least privilege.What should you use?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.Your network contains a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. The functional level of the forest is Windows Server 2012 R2. All domain controllers run Windows Server 2012 R2.Sysvol replicates by using the File Replication Service (FRS).You plan to replace the existing domain controllers with new domain controllers that will run Windows Server 2022.You need to ensure that you can add the first domain controller that runs Windows Server 2022.Solution: You migrate sysvol from FRS to Distributed File System (DFS) Replication.Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a server named Server1 that runs Windows Server.You need to ensure that only specific applications can modify the data in protected folders on Server1.Solution: From Virus & threat protection, you configure Controlled folder access.Does this meet the goal?

You have two Azure Virtual machines that run Windows Server. You plan to create a failover cluster that will host the virtual machines. You need to configure an Azure Storage account that will be used by the cluster as a cloud witness. The solution must maximize resiliency. Which type of redundancy should you configure for the storage account?

You have a server named Server1 that runs Windows Server.You install a custom app named App1 that is accessed by using TCP port 52310.Users report that they cannot access App1.You confirm that App1 is running on Server1.You need to ensure that the users can access App1. The solution must only provide access to App1 on Server1.What should you do in Windows Defender Firewall with Advanced Security?

You have two Azure virtual networks named Vnet1 and Vnet2.You have a Windows 10 device named Client1 that connects to Vnet1 by using a Point-to-Site (P2S) IKEv2 VPN.You implement virtual network peering between Vnet1 and Vnet2. Vnet1 allows gateway transit Vnet2 can use the remote gateway.You discover that Client1 cannot communicate with Vnet2.You need to ensure that Client1 can communicate with Vnet2.Solution: You download and reinstall the VPN client configuration.Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that mightmeet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a server named Server1 that runs Windows Server.You need to ensure that only specific applications can modify the data in protected folders on Server1.Solution: From App & browser control, you configure the Exploit protection settings.Does this meet the goal?

You are remediating the firewall security risks to meet the security requirements.What should you configure to reduce the risks?

You have a Microsoft Sentinel deployment and 100 Azure Arc-enabled on-premises servers. All the Azure Arc-enabled resources are in the same resource group.You need to onboard the servers to Microsoft Sentinel. The solution must minimize administrative effort.What should you use to onboard the servers to Microsoft Sentinel?

Your on-premises network contains an Active Directory Domain Services (AD DS) domain. The domain contains a server named Server1 that hosts an app named App1. App1 uses Active Directory authentication.You have a Microsoft Entra tenant that contains a user named User1.You deploy Microsoft Entra Connect sync and configure password synchronization.User1 fails to authenticate to App1.You need to ensure that User1can authenticate to App1.What should you do?

You have a failover cluster named Cluster1 that has the following configurations: Number of nodes: 6 Quorum: Dynamic quorum Witness: File share, Dynamic witness What is the maximum number of nodes that can fail simultaneously while maintaining quorum? Note this question is asking about nodes failing 'simultaneously', not nodes failing one after the other. With six nodes and one witness, there are seven votes. To maintain quorum there needs to be four votes available (four votes is the majority of seven). This means that a minimum of three nodes plus the witness need to remain online for the cluster to function. Therefore, the maximum number of simultaneous failures is three. https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/understand-quorum

You have an Active Directory Domain Services (AD DS) domain. The domain contains a server named Server1 that runs Windows Server.You need to prevent the registration of specific COM objects on Server1.What should you use?

You have two Azure virtual networks named Vnet1 and Vnet2. You have a Windows 10 device named Client1 that connects to Vnet1 by using a Point-to-Site (P2S) IKEv2 VPN. You implement virtual network peering between Vnet1 and Vnet2. Vnet1 allows gateway transit Vnet2 can use the remote gateway. You discover that Client1 cannot communicate with Vnet2. You need to ensure that Client1 can communicate with Vnet2. Solution: You download and reinstall the VPN client configuration. Does this meet the goal?