What is a best practice concerning voice traffic and dynamic segmentation on AOS-CX switches?

A network administrator wants to replace older access layer switches with AOS-CX 6300 switches.Which virtual switching technology can the administrator implement with this solution?

A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has thetwo servers defined. A network engineer notices the following command configured on the AOS-CX switches:radius-server tracking user-name monitor password plaintext aruba123What is the purpose of this configuration?

The network is configured for OSPF with the following attributes: Core1 and Core2 and ABRs Area 1 has 20 networks in the 10.1.0.0/16 range Area 0 has 10 networks in the 10.0.0.0/16 range Area 2 has 50 networks in the 10.2.0.0/16 range The ASBR is importing a static route into Area 1 Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:

A network administrator is managing a network that deploys a multicast service. The administratorhasmultiple streams successfully being routed by PIM-DM in the network. The administrator then adds anew stream with a destination address of 239.0.0.1. However, clients who have not joined thestream are receiving it.What should the administrator do to fix this problem?

Examine the AOS-CS switch output:Based on this output, what is correct?

Which protocol does NetEdit use to discover devices in a subnet during the discovery process?

Which concept is implemented using Aruba's dynamic segmentation?

Examine the output from an AOS-CX switch implementing a dynamic segmentation solution involving downloadable user roles:

What is correct regarding the configuration of ACLs on AOS-CX switches?

Which statement is correct regarding ACLs and TCAM usage?

Which option correctly defines how to identify a VLAN as a voice VLAN on an AOS-CX switch?

An administrator is replacing the current access switches with AOS-CX switches. The access layerswitchesmust authenticate user and networking devices connecting to them. Some devices support no formofauthentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to thesameport, where the PC is connected to the data port of the phone and the phone’s LAN port is connectedto the switch.Which statement is correct about this situation?

A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches: radius-server tracking user-name monitor password plaintext aruba123What is the purpose of this configuration?

A network engineer is using NetEdit to manage AOS-CX switches. The engineer notices that a lot of thirdparty VoIP phones are showing up in the NetEdit topology. The engineer deletes these, but they are automatically rediscovered by NetEdit and added back in.What should the administrator do to solve this problem?

Which statement is correct regarding ACLs and TCAM usage?

An administrator implements interim accounting for guest users so that ClearPass can track the amount of bandwidth that guests upload and download. Guests that abuse bandwidth consumption should be disconnected from the network. The administrator configures the following on the AOS-CX access switches:

An administrator is supporting a network with the access layer consisting of AOS-CX 6300 and 6400 switches. The administrator needs to quickly deploy Aruba IAPs and security cameras in the network, ensuring that the correct QoS and VLAN settings are dynamically applied to the switch ports. Currently, switches are not configured to do device authentication, and no authentication server exists in the network.Which AOS-CX feature should the administrator use to dynamically assign the policy settings to the correct switch ports?

A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes.Which solution should the administrator implement?

What is a concept associated with PIM sparse mode (SM)?

An administrator is managing a network comprised of AOS-CX switches deployed at the aggregation layer. The switches are paired in a VSX stack and run the OSPF routing protocol. The administrator is concerned about how long it takes for OSPF to converge when one of the VSX switches has to reboot.

A network administrator is attempting to troubleshoot a connectivity issue between a group of usersand aparticular server. The administrator needs to examine the packets over a period of time from theirdesktop;however, the administrator is not directly connected to the AOS-CX switch involved with the trafficflow.What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch?(Choose two.)

Examine the network exhibit.A company has a guest implementation for wireless and wired access. Wireless access isimplementedthrough a third-party vendor. The company is concerned about wired guest traffic traversing thesame network as the employee traffic. The network administrator has established a GRE tunnelbetween AOS-CX switches where guests are connected to a routing switch in the DMZ.Which feature should the administrator implement to ensure that the guest traffic is tunneled to theDMZ while the employee traffic is forwarded using OSPF?

A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code. The solution leverages a third-party AAA solution. Thecompany is replacing existing access switches with AOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies forboth wired and wireless traffic.Which solution should the company implement?

An administrator has an AOS-CX switch configured with:router ospf 1area 0area 1 stub no-summaryIt is the only ABR for area 1. The switch has the appropriate adjacencies to routing switches in areas 0and 1.The current routes in each area are:Area 0: 5 routes (LSA Type 1 and 2)Area 1: 10 routes (LSA Type 1 and 2)External routes: 2 (LSA Type 5)Based on the above configuration, how many OSPF routes will routing switches see in Area 1?

An administrator is implementing a multicast solution in a multi-VLAN network. Which statement is true about the configuration of the switches in the network?

What must a network administrator implement in order to run an NAE script on an AOS-CX switch?

Examine the network exhibit:

A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants toleverage virtual switching technologies. The solution needs to support high-availability with dual-control planes.Which solution should the administrator implement?