An administrator creates service-based policies for AirGroup on the Mobility Master (MM). The administrator can define location-based policy limits based on which information?

An administrator at Campus A manages Aruba Mobility Controllers (MCs). The administrator definesa server group that includes a local ClearPass server and a remote Microsoft RADIUS server. TheClearPass server has the credentials for users at Campus A and the Microsoft RADIUS server has thecredentials for users at Campus B. Users at Campus A successfully authenticate and connect to theCampus A wireless network. However, when users from Campus B visit Campus A they failauthentication.What can the administrator do to solve this problem?

An administrator sets up a network scan set in AirWave to scan a subnet to identify devices for a firmware upgrade. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access.However, SSH access fails and the administrator must manually configure the SSH credentials used for all of thesedevices.What should the administrator have done before running the network scan?

An administrator supports a RAP at a branch office. A user's device that is attached to the Ethernet port is assigned an 802.1X AAA policy and is configured fortunneled node.How is the user's traffic transmitted to the corporate office?

Which license type must an administrator purchase to use Spectrum Monitoring?

An administrator implements per-user tunneled node that involves ArubaOS-Switches and Aruba Mobility Controllers (MCs).What always happens when a wired client connects to the network?

An administrator creates new pre- and post-authentication roles for a new WLAN. For which profile should the administrator assign these new roles under theManaged Network section?

Which Aruba Unified Communications and Collaboration (UCC) deployment mode should be used when UCC is disabled on the Mobility Controllers (MCs)?

A group of users on the same floor of a campus residence experience connectivity problemscontinuously throughout the morning. The administrator suspects that it is a L1 problem withphysical interference.What can the administrator do to find the cause of this problem?

A company has a wireless network that contains a cluster of four Aruba 7030 Mobility Controllers(MC) managed by a Mobility Master (MM) located in the data center. The company has Aps deployedthat are nearing the capacity of the cluster. The administrator wants to increase AP capacity.How can the administrator solve the problem?

An administrator needs to modify a VAP used for a branch office RAP. The VAP's operating mode is currently defined as backup and uses tunnel modeforwarding. The administrator wants to implement split-tunnel forwarding mode in the VAP.Which WLAN operating mode must the administrator define for the VAP before the tunnel forwarding mode can be changed to split-tunnel?

Which forwarding mode is used for a WLAN if a RAP needs to decrypt all user traffic and forward it locally?

An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs). Which role should the administrator assign to an administrator who should have the same privileges as the default admin account?

An administrator implements clustering on Aruba Mobility Controllers (MCs) that runArubaOS 8.x. An AP is connected to a cluster member. The administrator accidentally powers off the AP.How does the AP determine that it should failover to an alternate controller in the cluster?

Which device can terminate to a cluster of Aruba Mobility Controllers (MCs) that run ArubaOS.8.x?

In the WebUI of an Aruba Mobility Controller (MC), where recommended approach for this process generate a tech support file that the Aruba Technical Support team can use to help customers?

A customer uses an SIP application that is not supported by Aruba United Communications andCollaboration (UCC). Which voice deployment mode should the administrator implement on ArubaMobility Controllers (MCs) to support this application?

The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot modeshown in the exhibit. What can the administrator determine about the configuration of the AP?

Refer to the exhibit.The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in theexhibit. What can the administrator determine about the configuration of the AP?

A branch office location has two buildings: an office and a small warehouse that are within 20 meters of each other. A RAP at the branch office provides connectivity to the corporate office network. This RAP is also configured as a Remote Mesh Portal (RMP).

An administrator creates service-based policies for AirGroup on the Mobility Master (MM). The administrator can define location-based policy limits based onwhich information?

An administrator deploys an AP at a branch office. The branch office has a private WAN circuit that provides connectivity to a corporate office controller. AnEthernet port on the AP is connected to a network storage device that contains sensitive information. The administrator is concerned about sending this traffic inclear-text across the private WAN circuit.What can the administrator do to prevent this problem?

Refer to the exhibit.What can an administrator determine from this Aruba device output?

Refer tothe exhibits.Exhibit 1: WLAN VAP configurationExhibit 2: Microsoft NPS server configurationExhibit 3: Server group configuration for the VAP.An employee authenticates with the username employee and the correct password. However, once theuser authenticates, an administrator notices that the employee is assigned the authenticated role and not the desired employee role.What should the administrator do to solve this problem?

An administrator wants to use AirWave to manage the configuration policy settings of a set of ArubaOS-Switches. Where should the administrator perform this action?