لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت

السؤال #1
Which two requirements must be met to set up an N+1 HA cluster? (Choose two.)
A. A FortiNAC-F manager
B. A FortiNAC-F device designated as a secondary
C. A dedicated VLAN for primary and secondary synchronization
D. At least two FortiNAC-F devices designated as primary
عرض الإجابة
اجابة صحيحة: AB
السؤال #2
Refer to the exhibits.An administrator has configured the DHCP scope for a registration isolation network, but the isolation process isn't working.What is the problem with the configuration?
A. The domain name server designation is incorrect
B. The label uses a system-reserved value
C. The lease pool does not contain a complete subnet
D. The gateway defined for the scope is incorrect
عرض الإجابة
اجابة صحيحة: D
السؤال #3
While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon.What would cause this?
A. The wrong SNMP community string was entered during discovery
B. The SNMP ObjectID is not recognized by FortiNAC-F
C. A read-only SNMP community string was used
D. SNMP is not enabled on the switch
عرض الإجابة
اجابة صحيحة: B
السؤال #4
Which two requirements must be met to set up an N+1 HA cluster? (Choose two.)
A. A FortiNAC-F manager
B. A FortiNAC-F device designated as a secondary
C. A dedicated VLAN for primary and secondary synchronization
D. At least two FortiNAC-F devices designated as primary
عرض الإجابة
اجابة صحيحة: AB
السؤال #5
An administrator wants to control user access to corporate resources by integrating FortiNAC-F with FortiGate using firewall tags defined on FortiNAC-F.Where would the administrator assign the firewall tag value that will be sent to FortiGate?
A. RADIUS group attribute
B. Logical network
C. Device profiling rule
D. Security rule
عرض الإجابة
اجابة صحيحة: D
السؤال #6
An administrator wants FortiNAC-F to return a group of user-defined RADIUS attributes in RADIUS responses.Which condition must be true to achieve this?
A. nbound RADIUS requests must contain the Calling-Station-ID attribute
B. he requesting device must support RFC 5176
C. he device models in the inventory view must be configured for proxy-based authentication
D. ADIUS accounting must be enabled on the FortiNAC-F RADIUS server configuration
عرض الإجابة
اجابة صحيحة: A
السؤال #7
A healthcare organization is integrating FortiNAC-F with its existing MDM. Communication is failing between the systems.What could be a probable cause?
A. Security Fabric traffic is failing
B. SSH communication is failing
C. REST API communication is failing
D. SOAP API communication is failing
عرض الإجابة
اجابة صحيحة: C
السؤال #8
An administrator wants to create a conference manager administrator account but would like to limit the number of conference accounts that can be generated to 30.Which statement about conference accounts is true?
A. In FortiNAC-F, conference accounts can be limited by multiples of 25, so the conference administrator could create 50 accounts
B. The administrator can set a maximum of 30 conference accounts in the administrative profile for the conference manager
C. The conference account limit is defined in the onboarding conference portal
D. Conference account limits are defined in the conference guest and contractor template
عرض الإجابة
اجابة صحيحة: A
السؤال #9
While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon.What would cause this?
A. The wrong SNMP community string was entered during discovery
B. The SNMP ObjectID is not recognized by FortiNAC-F
C. A read-only SNMP community string was used
D. SNMP is not enabled on the switch
عرض الإجابة
اجابة صحيحة: B
السؤال #10
An administrator manages a corporate environment where all users log into the corporate domain each time they connect to the network. The administrator wants to leverage login scripts to use a FortiNAC-F agent to enhance endpoint visibility.Which agent can be deployed as part of a login script?
A. Persistent
B. Dissolvable
C. Mobile
D. Passive
عرض الإجابة
اجابة صحيحة: B
السؤال #11
Which two requirements must be met to set up an N+1 HA cluster? (Choose two.)
A. A FortiNAC-F manager
B. A FortiNAC-F device designated as a secondary
C. A dedicated VLAN for primary and secondary synchronization
D. At least two FortiNAC-F devices designated as primary
عرض الإجابة
اجابة صحيحة: AB
السؤال #12
A healthcare organization is integrating FortiNAC-F with its existing MDM. Communication is failing between the systems.What could be a probable cause?
A. Security Fabric traffic is failing
B. SSH communication is failing
C. REST API communication is failing
D. SOAP API communication is failing
عرض الإجابة
اجابة صحيحة: C
السؤال #13
In which three ways would deploying a FortiNAC-F Manager into a large environment consisting of several FortiNAC-F Cas simplify management? (Choose three.)
A. Global infrastructure device inventory
B. Global version control
C. Global authentication security policies
D. Pooled licenses
E. Global visibility
عرض الإجابة
اجابة صحيحة: ACE
السؤال #14
An administrator wants to control user access to corporate resources by integrating FortiNAC-F with FortiGate using firewall tags defined on FortiNAC-F.Where would the administrator assign the firewall tag value that will be sent to FortiGate?
A. RADIUS group attribute
B. Logical network
C. Device profiling rule
D. Security rule
عرض الإجابة
اجابة صحيحة: D
السؤال #15
Which two requirements must be met to set up an N+1 HA cluster? (Choose two.)
A. A FortiNAC-F manager
B. A FortiNAC-F device designated as a secondary
C. A dedicated VLAN for primary and secondary synchronization
D. At least two FortiNAC-F devices designated as primary
عرض الإجابة
اجابة صحيحة: AB
السؤال #16
An administrator wants to control user access to corporate resources by integrating FortiNAC-F with FortiGate using firewall tags defined on FortiNAC-F.Where would the administrator assign the firewall tag value that will be sent to FortiGate?
A. RADIUS group attribute
B. Logical network
C. Device profiling rule
D. Security rule
عرض الإجابة
اجابة صحيحة: D
السؤال #17
In which three ways would deploying a FortiNAC-F Manager into a large environment consisting of several FortiNAC-F Cas simplify management? (Choose three.)
A. Global infrastructure device inventory
B. Global version control
C. Global authentication security policies
D. Pooled licenses
E. Global visibility
عرض الإجابة
اجابة صحيحة: ACE
السؤال #18
Where should you configure MAC notification traps on a supported switch?
A. nly on ports that generate linkup and linkdown traps
B. n all ports except uplink ports
C. nly on ports defined as learned uplinks
D. n all ports on the switch
عرض الإجابة
اجابة صحيحة: D
السؤال #19
Where should you configure MAC notification traps on a supported switch?
A. Only on ports that generate linkup and linkdown traps
B. Only on ports defined as learned uplinks
C. On all ports on the switch
D. On all ports except uplink ports
عرض الإجابة
اجابة صحيحة: C
السؤال #20
An administrator manages a corporate environment where all users log into the corporate domain each time they connect to the network. The administrator wants to leverage login scripts to use a FortiNAC-F agent to enhance endpoint visibility.Which agent can be deployed as part of a login script?
A. Persistent
B. Dissolvable
C. Mobile
D. Passive
عرض الإجابة
اجابة صحيحة: B
السؤال #21
An administrator manages a corporate environment where all users log into the corporate domain each time they connect to the network. The administrator wants to leverage login scripts to use a FortiNAC-F agent to enhance endpoint visibility.Which agent can be deployed as part of a login script?
A. Persistent
B. Dissolvable
C. Mobile
D. Passive
عرض الإجابة
اجابة صحيحة: B
السؤال #22
While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon.What would cause this?
A. The wrong SNMP community string was entered during discovery
B. The SNMP ObjectID is not recognized by FortiNAC-F
C. A read-only SNMP community string was used
D. SNMP is not enabled on the switch
عرض الإجابة
اجابة صحيحة: B
السؤال #23
An administrator wants to create a conference manager administrator account but would like to limit the number of conference accounts that can be generated to 30.Which statement about conference accounts is true?
A. In FortiNAC-F, conference accounts can be limited by multiples of 25, so the conference administrator could create 50 accounts
B. The administrator can set a maximum of 30 conference accounts in the administrative profile for the conference manager
C. The conference account limit is defined in the onboarding conference portal
D. Conference account limits are defined in the conference guest and contractor template
عرض الإجابة
اجابة صحيحة: A
السؤال #24
While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon.What would cause this?
A. The wrong SNMP community string was entered during discovery
B. The SNMP ObjectID is not recognized by FortiNAC-F
C. A read-only SNMP community string was used
D. SNMP is not enabled on the switch
عرض الإجابة
اجابة صحيحة: B
السؤال #25
In which three ways would deploying a FortiNAC-F Manager into a large environment consisting of several FortiNAC-F Cas simplify management? (Choose three.)
A. Global infrastructure device inventory
B. Global version control
C. Global authentication security policies
D. Pooled licenses
E. Global visibility
عرض الإجابة
اجابة صحيحة: ACE

View The Updated Fortinet Exam Questions

SPOTO Provides 100% Real Fortinet Exam Questions for You to Pass Your Fortinet Exam!

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:
Contact Us