السؤال #1

A virtual server is using a TCP profile based on the top-wan-optimized profile for a streaming application Users report videos are loading slowly.Which setting should be modified in the TCP profile to optimize the application?

A. Disable Slow Start

B. Disable Selective ACKs

C. Disable Nagle's Algorithm

D. Disable Reset on Timeout

عرض الإجابة

اجابة صحيحة: A

السؤال #2

A new DNS virtual server has been configured. Testing reveals that DNS server has failed to accept DNS over TCP. The configuration of the virtual server is as follows: Which action should be taken to correct this issue?

A. Acreate a new virtual server with the service port of 53 and the protocol set to TC

B. Bchange the profile set on the virtual server To TCP/UDP

C. Cchange the profile set on the virtual server to TCP

D. Dadd a TCP prone to the existing virtual server

عرض الإجابة

اجابة صحيحة: A

السؤال #3

Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device. What are the required profile and persistence settings for a standard virtual server?

A. tcp, ctientsst, ftp serverssl persistence

B. tcp, clientssl, serverssl persistence

C. tcp, ftp - Source address persistence

D. tcp - no persistence profile will be used

عرض الإجابة

اجابة صحيحة: C

السؤال #4

An LTM Specialist needs to add a pool that will load balance MYSOL services. It has four members, each with differing hardware platforms.All pool members are already assigned to another pool for load balancing FTP traffic.Which load balancing method is most effective when the LTM Specialist sets up the pool?

A. east Connections (node)

B. bserved (node)

C. ound Robin

D. redictive member)

عرض الإجابة

اجابة صحيحة: B

السؤال #5

An LTM Specialist observes decreased performance and intermittent connection reap LTM system. Based on the configuration, which action will address these issues?

A. Use an optimized TCP profile

B. Use a FastL4 profile on the virtual server

C. Use a default caching profile on the virtual server

D. Use a shorter idle timeout on the TCP profile

عرض الإجابة

اجابة صحيحة: D

السؤال #6

A virtual server is using a TCP profile based on the top-wan-optimized profile for a streaming application Users report videos are loading slowly.Which setting should be modified in the TCP profile to optimize the application?

A. Disable Slow Start

B. Disable Selective ACKs

C. Disable Nagle's Algorithm

D. Disable Reset on Timeout

عرض الإجابة

اجابة صحيحة: A

السؤال #7

Exhibit.Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to allservers.What is the expected failover behavior?

A. LTM1 Standby / LTM2 Standby

B. LTM1 Active /LTM2 Active

C. LTM1 Active / LTM2 Standby

D. LTM1 Standby / LTM2 Active

عرض الإجابة

اجابة صحيحة: C

السؤال #8

Exhibit.Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to allservers.What is the expected failover behavior?

A. LTM1 Standby / LTM2 Standby

B. LTM1 Active /LTM2 Active

C. LTM1 Active / LTM2 Standby

D. LTM1 Standby / LTM2 Active

عرض الإجابة

اجابة صحيحة: C

السؤال #9

An ITM Specialist has the configuration shown:The LTM Specialist needs to create a new virtual server in part B. Which virtual address(es) should be used for the new virtual server?

A. 10

B. 10

C. 10

D. 10

عرض الإجابة

اجابة صحيحة: A

السؤال #10

The web application team requests help from the LTM Specialist to Improve the performance of their web sites that are load balanced by the F5 LTM device with a Standard Virtual Server. Which virtual server type will improve the performance of the web application servers?

A. Performance (HTTP)

B. Performance (Layer 4)

C. Stateless

D. Forwarding (IP)

عرض الإجابة

اجابة صحيحة: A

السؤال #11

A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.Which virtual server type should an LTM Specialist configure on the LTM device?

A. Forwarding (Layer 2)

B. Standard

C. Stateless

D. DHCP relay

E. Forwarding (IP)

عرض الإجابة

اجابة صحيحة: E

السؤال #12

The web application team requests help from the LTM Specialist to Improve the performance of their web sites that are load balanced by the F5 LTM device with a Standard Virtual Server. Which virtual server type will improve the performance of the web application servers?

A. Performance (HTTP)

B. Performance (Layer 4)

C. Stateless

D. Forwarding (IP)

عرض الإجابة

اجابة صحيحة: A

السؤال #13

Exhibit.Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to allservers.What is the expected failover behavior?

A. LTM1 Standby / LTM2 Standby

B. LTM1 Active /LTM2 Active

C. LTM1 Active / LTM2 Standby

D. LTM1 Standby / LTM2 Active

عرض الإجابة

اجابة صحيحة: C

السؤال #14

An LI M device is experiencing a high volume of traffic. The virtual server is struggling under the load. The problem appears to be on the server side connections. The virtual server is accepting connections . The virtual server is accepting connections on https and is configured with an SSL profile and http pool.What should be added to increase the performance of the device?

A. an HTTP Compression profile

B. a One Connect profile

C. smaller key to the SSL profile

D. a SPDY profile

عرض الإجابة

اجابة صحيحة: B

السؤال #15

Exhibit.Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to allservers.What is the expected failover behavior?

A. LTM1 Standby / LTM2 Standby

B. LTM1 Active /LTM2 Active

C. LTM1 Active / LTM2 Standby

D. LTM1 Standby / LTM2 Active

عرض الإجابة

اجابة صحيحة: C

السؤال #16

An LTM Specialist needs to configure a virtual server with the requirements displayed below. Application is currently an internal HTTP application Encrypted external user access Links are hard for siteA example.com and need to rewritten to siteB.Example.com Which profiles must the LTM Specialist use to provide the proper functionality?

A. AClientssll, Stream

B. BServerless, Stream

C. CClientssl, fastL4, Stream

D. DServerless, fastL4, Stream

عرض الإجابة

اجابة صحيحة: A

السؤال #17

A VCMP guest has the following characteristics:· Resources allocated for CPU memory, network interfaces, and disk space · Virtual disk created· The guest is NOT runningThe guest is NOT running in which state is the VCMP guest

A. Offline

B. Deployed

C. Provisioned

D. Configured

عرض الإجابة

اجابة صحيحة: C

السؤال #18

The web application team requests help from the LTM Specialist to Improve the performance of their web sites that are load balanced by the F5 LTM device with a Standard Virtual Server. Which virtual server type will improve the performance of the web application servers?

A. Performance (HTTP)

B. Performance (Layer 4)

C. Stateless

D. Forwarding (IP)

عرض الإجابة

اجابة صحيحة: A

السؤال #19

Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device. What are the required profile and persistence settings for a standard virtual server?

A. tcp, ctientsst, ftp serverssl persistence

B. tcp, clientssl, serverssl persistence

C. tcp, ftp - Source address persistence

D. tcp - no persistence profile will be used

عرض الإجابة

اجابة صحيحة: C

السؤال #20

An LTM Specialist needs to assign a health monitor to a pool with two pool members 10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP. The health of the application depends on the health of an another server (10 10 10 100) that runs port 9080 with TCP. Which two custom TCP monitors should be selected as the pool's health monitors' (Choose two)

A. Aa custom TCP monitor that works on port 9080 with 10

B. Ba custom TCP monitor that works on port 9080,

C. Ca custom TCP monitor that works on port 8080

D. Da custom TCP monitor that works on port 9080 with 10,10

E. Ea custom TCP monitor that works on port 8080 with 10

F. Fa custom TCP monitor that works on port 8080 with 10

عرض الإجابة

اجابة صحيحة: AC

السؤال #21

An LTM Specialist has trouble with SNMP traps in the management network.The ITM Specialist takes the network capture shown to troubleshoot:What should the UM Specialist change to capture packets related to this workflow?

A. he verbose level

B. he interface

C. he tcpdump filter expression

D. he port

عرض الإجابة

اجابة صحيحة: B

السؤال #22

Exhibit.Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to allservers.What is the expected failover behavior?

A. LTM1 Standby / LTM2 Standby

B. LTM1 Active /LTM2 Active

C. LTM1 Active / LTM2 Standby

D. LTM1 Standby / LTM2 Active

عرض الإجابة

اجابة صحيحة: C

السؤال #23

Exhibit.Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to allservers.What is the expected failover behavior?

A. LTM1 Standby / LTM2 Standby

B. LTM1 Active /LTM2 Active

C. LTM1 Active / LTM2 Standby

D. LTM1 Standby / LTM2 Active

عرض الإجابة

اجابة صحيحة: C

السؤال #24

An LI M device is experiencing a high volume of traffic. The virtual server is struggling under the load. The problem appears to be on the server side connections. The virtual server is accepting connections . The virtual server is accepting connections on https and is configured with an SSL profile and http pool.What should be added to increase the performance of the device?

A. an HTTP Compression profile

B. a One Connect profile

C. smaller key to the SSL profile

D. a SPDY profile

عرض الإجابة

اجابة صحيحة: B

السؤال #25

An LI M device is experiencing a high volume of traffic. The virtual server is struggling under the load. The problem appears to be on the server side connections. The virtual server is accepting connections . The virtual server is accepting connections on https and is configured with an SSL profile and http pool.What should be added to increase the performance of the device?

A. an HTTP Compression profile

B. a One Connect profile

C. smaller key to the SSL profile

D. a SPDY profile

عرض الإجابة

اجابة صحيحة: B

السؤال #26

An LTM Specialist needs to provide access to a 8BG-IP to device for a company's support person access to the BIG IP device, but are NOT allowed to change any settings All support the support remote access to the BIG-IP device, but are NOT allowed to change ant settings. All support have accounts in the company's Active DirectoryWhich method is appropriate to provide access for the support personnel to the BIG-JP device?

A. configure remote authentication for all users with a default user role of Guest

B. configure remote authentication and map support personnel users to the Guest user role

C. configure remote authentication and map support personnel users to the Operator user role

D. configure remote authentication for all users with a default user role of Operator

عرض الإجابة

اجابة صحيحة: B

السؤال #27

A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.Which virtual server type should an LTM Specialist configure on the LTM device?

A. Forwarding (Layer 2)

B. Standard

C. Stateless

D. DHCP relay

E. Forwarding (IP)

عرض الإجابة

اجابة صحيحة: E

السؤال #28

A virtual server is using a TCP profile based on the top-wan-optimized profile for a streaming application Users report videos are loading slowly.Which setting should be modified in the TCP profile to optimize the application?

A. Disable Slow Start

B. Disable Selective ACKs

C. Disable Nagle's Algorithm

D. Disable Reset on Timeout

عرض الإجابة

اجابة صحيحة: A

السؤال #29

A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.Which virtual server type should an LTM Specialist configure on the LTM device?

A. Forwarding (Layer 2)

B. Standard

C. Stateless

D. DHCP relay

E. Forwarding (IP)

عرض الإجابة

اجابة صحيحة: E

السؤال #30

TWO BIG-IP appliances need to be configured to load balance multiple firewall in a firewall sandwich.Which health monitor setting should be used to verify that the firewalls are able to forward traffic?

A. daptive

B. ransparent

C. everse

D. p internal

عرض الإجابة

اجابة صحيحة: B

لا تريد أن تفوت شيئا؟

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع!
احصل الان

View The Updated F5 301a Exam Questions

View The Updated F5 Exam Questions

عرض الإجابات بعد التقديم

لا تريد أن تفوت شيئا؟

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع! احصل الان

View The Updated F5 301a Exam Questions

View The Updated F5 Exam Questions

عرض الإجابات بعد التقديم

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع!
احصل الان