السؤال #1

Refer to the exhibit.Which two statements about the routing table of the leaf switch are true? (Choose two.)

A. 10

B. The next hop 10

C. 172

D. The next hop 10

E. The next hop 10

عرض الإجابة

اجابة صحيحة: AD

السؤال #2

An engineer must configure OSPFv2 connectivity between a pair of Cisco Nexus switches. The connection between the switches must meet these requirements: Use unicast for updates. Use decentralized communication of updates. Full adjacency between switches. Which configuration is needed to meet these requirements?

A. Afilter list between the neighbors

B. Bvirtual link between the neighbors

C. Cinterface with a type of p2p network

D. Dstub area between the neighbors

عرض الإجابة

اجابة صحيحة: C

السؤال #3

A Cisco ACI engineer must configure an access port on a Cisco ACI leaf switch. The access policy should be configured so that it supports L3Out connectivity concurrently with several EPGs that are mapped to this interface with the static port method. How should the access policy be configured?

A. by linking the interface policy group to multiple Attachable Access Entity Profiles

B. with two interface policy groups that are linked to the same interface profile port selector

C. by mapping a single physical domain, mapped to the L3out and EPG interfaces

D. with a single Attachable Access Entity Profile that is linked to the corresponding routed domain and physical domain

عرض الإجابة

اجابة صحيحة: D

السؤال #4

An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration. The relevant access policies and tenant policies have been created. A single AAEP is used to configure the access ports in the fabric. Which two additional steps must be taken to complete the configuration? (Choose two.)

A. The EPGs must link directly to the corresponding AAEP

B. A contract must be defined between the EPGs

C. The EPGs must be configured as static ports

D. The corresponding bridge domains must be configured in legacy mode

E. The EPGs must be linked to the correct physical domain

عرض الإجابة

اجابة صحيحة: CE

السؤال #5

Which upgrade type must be used to patch a known hardware problem or improve the functionality of modular Cisco Nexus 9000 Series Switches?

A. OAP

B. MU

C. IR

D. PLD

عرض الإجابة

اجابة صحيحة: D

السؤال #6

An engineer is configuring a vHBA template in Cisco UCS Manager. The engineer needs to specify the logicaladdresses used by the vHBA and the path through which the SAU Traffic flows. Which two resources must bespecified in the vHBA template? (Choose two)

A. WNN

B. LAN ID

C. abric ID

D. AC addresses

E. WPN Pod

عرض الإجابة

اجابة صحيحة: AE

السؤال #7

Refer to the exhibit.What must be connected to clear the HA NOT READY status?

A. Layer 1-Layer 2 ports

B. server chassis

C. management ports

D. network uplinks

عرض الإجابة

اجابة صحيحة: B

السؤال #8

An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully functional, the router must be the active master. Which set of commands must be used to implement the scenario?

A. feature hsrp interface vlan100 ip address 10

B. feature-set hsrp interface vlan100 ip address 10

C. feature-set hsrp interface vlan100 ip address 10

D. feature hsrp interface vlan100 ip address 10

عرض الإجابة

اجابة صحيحة: A

السؤال #9

Refer to the exhibit.Refer to the exhibit Which port type must be used to complete the configuration of a monitoring session that sends traffic to a monitoring device'?

A. Eth1/8 as appliance port Eth1/4 as uplink port

B. Eth1/8 as monitor port Eth1/4 as uplink port

C. Eth1/8 as uplink port Eth1/4 as monitor port

D. Eth1/8 as uplink port Eth1/4 as appliance port

عرض الإجابة

اجابة صحيحة: D

السؤال #10

Refer to the exhibit.The STP priority of N7K-1 and N7K-2 are the lowest in the network.Which statement describes STP on the vPC?

A. N7K-1 and N7K-2 appear as a single STP root

B. N7K-1 appears as the STP root

C. N7K-1 preempts N7K-2 as the STP root

D. N7K-2 appears as the STP root

عرض الإجابة

اجابة صحيحة: A

السؤال #11

Refer to the exhibit. Which VLANs are capable to be assigned on vPC interfaces?

A. 100-102

B. 100-103

C. 100-104

D. 100-105

عرض الإجابة

اجابة صحيحة: D

السؤال #12

Refer to exhibit.Refer to the exhibit. The router R1 and N9K1 establish EIGRP neighborship. R1 is advertising network 10.1.1.15/32 toN9K1 and N9K2 and N9K3 are forming the OSPF neighborship over area 1 Which configuration prevents N9K3 fromreceiving external LSA for network 10.1.1.15/32?A)B)C)http://www.justcerts.comP-D)

A. ption A

B. ption B

C. ption C

D. ption D ANSWER: D

عرض الإجابة

اجابة صحيحة: D

السؤال #13

An engineer configured an environment that contains the vPC and non-vPC switches. However, it was noticed that the downstream non-vPC switches do not receive the same STP bridge ID from the upstream vPC switch peers. Which vPC feature must be implemented to ensure that vPC and non-vPC switches receive the same STP bridge ID from the upstream vPC switch peers?

A. vpc local role-priority 4000

B. peer-switch

C. system-mac 0123

D. peer-gateway

عرض الإجابة

اجابة صحيحة: B

السؤال #14

A server engineer wants to control power usage on a Cisco UCS C-Series rack server down to the component level.Which two components support specific power limits? (Choose two.)

A. storage controller

B. network controller

C. processor

D. graphic card

E. memory

عرض الإجابة

اجابة صحيحة: CE

السؤال #15

Which NFS version uses the TCP protocol and needs only one IP port to run the service?

A. NFSv1

B. NFSv2

C. NFSv3

D. NFSv4

عرض الإجابة

اجابة صحيحة: D

السؤال #16

An engineer must perform an initial configuration of VXLAN Tunnel End-Point functionality on the Cisco Nexus 9000 Series platform. All the necessary features are already enabled on the switch. Which configuration set must be used to accomplish this goal?

A. NX9K(config)# interface loopback0 NX9K(config-if)# ip address 10

B. NX9K(config)# interface loopback0 NX9K(config-if)# ip address 10

C. NX9K(config)# interface loopback0 NX9K(config-if)# ip address 10

D. NX9K(config)# interface loopback0 NX9K(config-if)# ip address 10

عرض الإجابة

اجابة صحيحة: D

السؤال #17

An engineer is implementing an import operation in Cisco UCS Manager.What is the impact of performing this operation?

A. Information is modified on the management plane only

B. A configuration is imported from a higher release to a lower release

C. It is possible to schedule an import operation

D. Only a configuration file that was exported from the same Cisco UCS Manager is allowed to be imported

عرض الإجابة

اجابة صحيحة: A

السؤال #18

Refer to the exhibit.What must be connected to clear the HA NOT READY status?

A. Layer 1-Layer 2 ports

B. server chassis

C. management ports

D. network uplinks

عرض الإجابة

اجابة صحيحة: B

السؤال #19

Refer to the exhibit.The STP priority of N7K-1 and N7K-2 are the lowest in the network.Which statement describes STP on the vPC?

A. 7K-1 and N7K-2 appear as a single STP root

B. 7K-1 appears as the STP root

C. 7K-1 preempts N7K-2 as the STP root

D. 7K-2 appears as the STP root

عرض الإجابة

اجابة صحيحة: A

السؤال #20

Refer to the exhibit. During a vPC peer switch reload, there is packet loss between the server and the router. Which action must be taken to prevent this behavior during future reloads?

A. Set the routed uplink ports of the Cisco Nexus peers as orphans

B. Increase the vPC delay restore timer

C. Disable vPC ARP synchronize on the vPC peers

D. Decrease the OSPF hello and dead interval timers

عرض الإجابة

اجابة صحيحة: B

السؤال #21

Refer to exhibit.http://www.justcerts.comP-Refer to the exhibit. A network engineer must retrieve the network interface name from a JSON object. The engineerloads the JSON into a Python dictionary named json_object. Which code snippet completes the Python script?

A. ption A

B. ption B

C. ption C

D. ption D

عرض الإجابة

اجابة صحيحة: A

السؤال #22

An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth 1/2 interface for both switches must be advertised via OSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interface Eth1/1 on SW1 and Eth1/1 on SW2 must remain unaffected. Which configuration must be applied to both Nexus switches to meet these requirements?

A. interface ethernet 1/2 passive - interface default

B. Interface ethernet 1/2 Ip ospf network point - to - point

C. interface ethernet 1/2 ip ospf passive - interface

D. interface ethernet 1/2 no ip ospf passive - Interface

عرض الإجابة

اجابة صحيحة: C

السؤال #23

The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis.Which two SPAN characteristics must be considered? (Choose two.)

A. SPAN source ports can be monitored in multiple SPAN sessions

B. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports

C. A SPAN source port cannot be a destination SPAN port

D. Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports

E. The rx/tx option is available for VLAN or VSAN SPAN sessions

عرض الإجابة

اجابة صحيحة: BC

السؤال #24

An engineer updated firmware on Fabric Interconnects and activates it. However, the endpoint fails to boot from the new firmware image. What is expected to occur in this case?

A. The system defaults to the backup image version

B. The system defaults to and boots into GOLD firmware image

C. The system defaults to the GOLD firmware image

D. The system defaults to and boots into kickstart image

عرض الإجابة

اجابة صحيحة: A

السؤال #25

A DevOps engineer must use Python to manage a Cisco device. The device is in a highly secure DMZ environment. Only trusted Cisco Python libraries can be used. Which solution meetsthe requirements?

A. Develop an off-box Python script that uses trusted Cisco libraries

B. Develop an application by using serverless technologies in a primary cloud provider

C. Develop a containerization application that uses trusted Cisco-provided libraries

D. Develop an on-box Python script that uses trusted Cisco libraries

عرض الإجابة

اجابة صحيحة: A

السؤال #26

Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development. Which attribute must be used to assign the servers to different microsegments?

A. data center

B. VM name

C. IP address

D. VMM domain

عرض الإجابة

اجابة صحيحة: B

السؤال #27

Which behavior defines streaming telemetry as a push model in Cisco devices?

A. Events and network changes generate telemetry data

B. Monitoring clients are pulling data from the network to see real-time statistics

C. JSON encoded telemetry data is transported using the gRPC protocol

D. The network devices send data in JSON or GPB format to configure endpoints

عرض الإجابة

اجابة صحيحة: A

السؤال #28

Refer to the exhibit. A host with a source address 10.10.10.10 sends traffic to multicast group 239.1.1.1. How do the vPC switches forward the multicast traffic?

A. If multicast traffic is received on Switch1 over the vPC peer-link, the traffic is dropped

B. If multicast traffic is received on Po10 Switch1, the traffic is forwarded out on Po1 and Po20

C. If multicast traffic is received on Po11 Switch2, the traffic is forwarded out only on Po20

D. If multicast traffic is received on Po11 Switch2, the traffic is dropped

عرض الإجابة

اجابة صحيحة: D

السؤال #29

A customer wants to offload some of its order processing to a public cloud environment. The customer environment is based on Cisco ACI and uses Puppet with containerized applications. The operations team requires a solution to orchestrate and optimize the cost of the new solution. Which product must be used to meet these requirements?

A. Cisco Workload Optimization Manager

B. Cisco CloudCenter

C. Cisco Intersight

D. Cisco Data Center Network Manager

عرض الإجابة

اجابة صحيحة: B

السؤال #30

An engineer must deploy a new Cisco MDS 9000 Series Switch and be able to receive LinkUp/LinKDown notifications that were sent using a secure industry standard. Which technology must be used to accomplish this goal?

A. PMON

B. SPAN

C. RMON

D. SNMP

E. Reveal Answer

عرض الإجابة

اجابة صحيحة: D

السؤال #31

An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric intercon- nect. Which backup type must be selected to meet these requirements?

A. Aall configuration

B. Bsystem configuration

C. Clogical configuration

D. Dfullstate

عرض الإجابة

اجابة صحيحة: B

السؤال #32

A small remote office is set to connect to the regional hub site via NSSA ASBR.Which type of LSA is sent to the remote office OSPF area?

A. type 7 LSA

B. type 1 LSA

C. type 5 LSA

D. type 3 LSA

عرض الإجابة

اجابة صحيحة: A

السؤال #33

Refer to the exhibit.The STP priority of N7K-1 and N7K-2 are the lowest in the network.Which statement describes STP on the vPC?

A. N7K-1 and N7K-2 appear as a single STP root

B. N7K-1 appears as the STP root

C. N7K-1 preempts N7K-2 as the STP root

D. N7K-2 appears as the STP root

عرض الإجابة

اجابة صحيحة: A

السؤال #34

Which virtual MAC address is the default for HSRP version 2 group 10?

A. 0000

B. 0000

C. 3784

D. 0000

عرض الإجابة

اجابة صحيحة: B

السؤال #35

Which virtual MAC address is the default for HSRP version 2 group 10?

A. 000

B. 000

C. 784

D. 000

عرض الإجابة

اجابة صحيحة: B

السؤال #36

Refer to the exhibit.Which statement about the ERSPAN configuration in this environment is true?

A. he session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic

B. ost B is the source of ERSPAN spanned traffic and host A is the traffic analyzer

C. he session number of the source of ERSPAN spanned traffic must have a session ID of 48 for the traffic analyzer to receive the traffic

D. ost A is the source of ERSPAN spanned traffic and host B is the traffic analyzer

عرض الإجابة

اجابة صحيحة: D

السؤال #37

An engineer must configure OSPF in the data center. The external routes have already been redistributed into OSPF. The network must meet these criteria:* The data center servers must reach services in the cloud and the services behind the redistributed routes.* The exit point toward the Internet should be propagated only when there is a dynamically learned default route from the upstream router.Which feature is required?

A. stubby area

B. totally stubby area

C. default-information originate

D. default-information originate always

عرض الإجابة

اجابة صحيحة: C

السؤال #38

Which Cisco UCS firmware reboot policy must be used in the maintenance policy to prevent the server firmware from upgrading automatically and wait for user input before proceeding?

A. Immediate

B. Schedule

C. User-ack

D. Timer-automatic

E. Reveal Answer

عرض الإجابة

اجابة صحيحة: C

السؤال #39

An engineer must configure Net Row to Identify packet flows and pfov.de statistics based on the collected flows for the Layer 2 attribute on a Cisco Nexus Series Switch. Which action must the engineer take to complete a NetFlow exporter configuration?

A. Specify the IP protocol or ToS fields as keys

B. Associate a flow monitor to the switch port output packets

C. Apply a flow monitor to an egress interface

D. Create a flow record and match datalink ether type

عرض الإجابة

اجابة صحيحة: D

السؤال #40

Which feature is supported with an In-Service Software Upgrade on a Cisco Nexus 9000 Series Switch?

A. nondisruptive upgrades via nonstop forwarding

B. configuration changes during an upgrade

C. upgrades to individual modules and line cards

D. zero downtime downgrades via dual supervisor modules

عرض الإجابة

اجابة صحيحة: A

السؤال #41

A network engineer must configure a power redundancy policy on a Cisco UCS C-Series Rack Server. The power redundancy must support two power sources being used to power the server. Which configuration should be applied to meet the requirement?

A. Option A

B. Option B

C. Option C

D. Option D

عرض الإجابة

اجابة صحيحة: D

السؤال #42

Which MAC address is an HSRP version 2?

A. 3842

B. 0000

C. 0000

D. 0100

عرض الإجابة

اجابة صحيحة: C

السؤال #43

An engineer must configure a Fibre Channel port channel on a Cisco Nexus 9000 Series Switch. The configuration must meet these requirements:* A port-channel protocol negotiation is performed with the peer ports.* The trunk mode must be explicitly configured for the interfaces.* VSANs from 10 to 20 must be allowed.Which command set configures the devices to meet the requirements?

A. ption B

B. ption A

C. ption C

D. ption D

عرض الإجابة

اجابة صحيحة: A

السؤال #44

Which action must be performed before renumbering a Cisco UCS chassis?

A. Run the shut and no shut command on the connected ports

B. Move the chassis to new ports on fabric interconnect

C. Decommission the chassis

D. Re-acknowledge the chassis

عرض الإجابة

اجابة صحيحة: C

السؤال #45

What is a characteristic of the install all command on the Cisco Nexus Series Switch?

A. automatically checks the image integrity

B. continues the upgrade process if any step in the sequence fails

C. upgrades only certain modules

D. impacts data plane traffic

عرض الإجابة

اجابة صحيحة: A

لا تريد أن تفوت شيئا؟

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع!
احصل الان

View The Updated 350-601 Exam Questions

عرض الإجابات بعد التقديم

لا تريد أن تفوت شيئا؟

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع! احصل الان

View The Updated 350-601 Exam Questions

عرض الإجابات بعد التقديم

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع!
احصل الان