السؤال #1

Refer to the exhibit.CCNP Collaborationfalse80018492749321234XnKexB0yWQ2iwfuoCe6AWQ2When a user dials 8001 to connect to a space that is hosted on Cisco Meeting Server, the user is prompted for a pin. The prompt says the user should press # to connect to a meeting without a pin, but guests and hosts must enter a pin before connecting to the meeting.Which configuration change resolves this issue?

A. The secret value must be changed to be solely numeric instead of alpha-numeric

B. The passcode must be changed to be longer than four digits

C. All access methods that are associated with the space must be changed to include a pin

D. A callLegProfile must be created and associated with the space so that pins are not optional

عرض الإجابة

اجابة صحيحة: D

السؤال #2

Refer to the exhibit.Content-Type: application/sdp Content-Length: 4938v=0o=Acano 0 0 IN IP4 10.0.101.120s=-c=IN IP4 10.0.101.120b=CT:16 t=0 0m=audio 50262 RTP/AVP 108 107 109 110 9 99 111 100 104 103 0 8 15 102 18 13 118 101a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48a=crypto:2 AEAD_AES_256_GCM ********************************************************************|2^48 a=crypto:3 AES_CM_128_HMAC_SHA1_80 *******************************************************|2^48 a=crypto:4 AES_CM_128_HMAC_SHA1_32 *******************************************************|2^48

m=video 50264 RTP/AVP 97 116 114 96 34 31 100 121 b=TIAS:16000a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48a=crypto:2 AEAD_AES_256_GCM ********************************************************************|2^48 a=crypto:3 AES_CM_128_HMAC_sha1_80 *******************************************************|2^48 a=crypto:4 AES_CM_128_HMAC_sha1_32 *******************************************************|2^48 a=content:main a=sendrecva=sprop-source:1 count=2;policies=cs:1 a=sprop-simul:1 1 * a=rtcp-fb:* nack pli a=rtcp-fb:* ccm fir a=rtcp-fb:* ccm cisco-scra=extmap:1 http://protocols.cisco.com/virtualid a=extmap:2 http://protocols.cisco.com/framemarking a=rtpmap:97 H264/90000 a=fmtp:97 profile-level-id=42800a;max-mpbs=489600;max-fs=8160;max-cpb=4000;max- dpd=4752;max-fps=6000Users report that they do not see a high-quality picture on the high-definition endpoints when they call into Cisco Meeting Server. An engineer must extract the SDP that is offered by Cisco Meeting Server from the SIP traces to troubleshoot. What is the cause of this issue?

A. Cisco Meeting Server is not configured for H

B. The AES ciphers are not compatible with high-definition video calling

C. The Content-Length value in the SDP does not support high-definition video calling

D. The SIP call bandwidth is not at a value that supports high-definition video calling

عرض الإجابة

اجابة صحيحة: D

السؤال #3

What is the purpose of the Call Bridge service within Cisco Meeting Server?

A. t replicates database information between all nodes in the cluster

B. t connects users from their web browsers into meetings that are hosted on Cisco Meeting Server

C. t is the core conferencing service and manages media and signaling

D. t converts RTP media into MP4 files that can be distributed for replay

عرض الإجابة

اجابة صحيحة: C

السؤال #4

What is the default maximum resolution for the internal streamer?

A. 20p

B. 440p

C. 080p

D. 80p

عرض الإجابة

اجابة صحيحة: C

السؤال #5

Refer to the exhibit.CCNP Collaborationfalse80018492749321234XnKexB0yWQ2iwfuoCe6AWQ2When a user dials 8001 to connect to a space that is hosted on Cisco Meeting Server, the user is prompted for a pin. The prompt says the user should press # to connect to a meeting without a pin, but guests and hosts must enter a pin before connecting to the meeting.Which configuration change resolves this issue?

A. The secret value must be changed to be solely numeric instead of alpha-numeric

B. The passcode must be changed to be longer than four digits

C. All access methods that are associated with the space must be changed to include a pin

D. A callLegProfile must be created and associated with the space so that pins are not optional

عرض الإجابة

اجابة صحيحة: D

السؤال #6

Which component does the Cisco Meeting Server web app use for firewall traversal?

A. MP interface

B. URN server

C. all Bridge

D. MPP server

عرض الإجابة

اجابة صحيحة: B

السؤال #7

An engineer configures Cisco Meeting Server as a conference resource for Cisco UCM. Cisco UCM has a secure SIP trunk to Cisco Meeting Server, but the server does not register to Cisco UCM. Which configuration resolves this issue?

A. Ensure that the SIP trunk from Cisco UCM to Cisco Meeting Server is a secure trunk using port 5061

B. Add Cisco Meeting Server to the Cisco UCM SIP trunk with an IP address and not an FQDN

C. Set the Web Admin port on the Conference Bridge settings to match Cisco Meeting Server

D. Configure an MRGL that contains Cisco Meeting Server to be associated with device pools

عرض الإجابة

اجابة صحيحة: D

السؤال #8

Refer to the exhibit.An administrator troubleshoots an issue with Cisco Meeting Server. Endpoints that call from the remote site cannot connect, but endpoints that call from headquarters can connect. What should the administrator do to resolve this issue?

A. Add a route for 192

B. Set interface b as the default interface

C. Remove the route for 192

D. Enable DHCP on interface a but not on interface b

عرض الإجابة

اجابة صحيحة: A

السؤال #9

Refer to the exhibit.CCNP Collaborationfalse80018492749321234XnKexB0yWQ2iwfuoCe6AWQ2When a user dials 8001 to connect to a space that is hosted on Cisco Meeting Server, the user is prompted for a pin. The prompt says the user should press # to connect to a meeting without a pin, but guests and hosts must enter a pin before connecting to the meeting.Which configuration change resolves this issue?

A. The secret value must be changed to be solely numeric instead of alpha-numeric

B. The passcode must be changed to be longer than four digits

C. All access methods that are associated with the space must be changed to include a pin

D. A callLegProfile must be created and associated with the space so that pins are not optional

عرض الإجابة

اجابة صحيحة: D

السؤال #10

An administrator notices that the Cluster section is not available under the configuration menu in the Cisco Meeting Server web interface. There are three Cisco Meeting Server servers that must run Call Bridge and database services in a single cluster. Which configuration should be completed?

A. all Bridge clustering must be configured in the CLI

B. all Bridges must be connected to a database cluster

C. ertificates must be configured on the Call Bridge

D. all Bridge groups must be created in the API

عرض الإجابة

اجابة صحيحة: A

السؤال #11

An engineer configures Cisco Meeting Server as a conference resource for Cisco UCM. Cisco UCM has a secure SIP trunk to Cisco Meeting Server, but the server does not register to Cisco UCM. Which configuration resolves this issue?

A. Ensure that the SIP trunk from Cisco UCM to Cisco Meeting Server is a secure trunk using port 5061

B. Add Cisco Meeting Server to the Cisco UCM SIP trunk with an IP address and not an FQDN

C. Set the Web Admin port on the Conference Bridge settings to match Cisco Meeting Server

D. Configure an MRGL that contains Cisco Meeting Server to be associated with device pools

عرض الإجابة

اجابة صحيحة: D

السؤال #12

To which two places should an administrator go to view an upcoming meeting scheduled on Cisco Meeting Server? (Choose two.)

A. isco Meeting Server MMP interface

B. isco Meeting Management meetings interface

C. isco Meeting Server web user interface

D. isco Meeting Server API

E. isco TMS interface

عرض الإجابة

اجابة صحيحة: BC

السؤال #13

An engineer configures Cisco Meeting Server as a conference resource for Cisco UCM. Cisco UCM has a secure SIP trunk to Cisco Meeting Server, but the server does not register to Cisco UCM. Which configuration resolves this issue?

A. Ensure that the SIP trunk from Cisco UCM to Cisco Meeting Server is a secure trunk using port 5061

B. Add Cisco Meeting Server to the Cisco UCM SIP trunk with an IP address and not an FQDN

C. Set the Web Admin port on the Conference Bridge settings to match Cisco Meeting Server

D. Configure an MRGL that contains Cisco Meeting Server to be associated with device pools

عرض الإجابة

اجابة صحيحة: D

السؤال #14

Refer to the exhibit.Content-Type: application/sdp Content-Length: 4938v=0o=Acano 0 0 IN IP4 10.0.101.120s=-c=IN IP4 10.0.101.120b=CT:16 t=0 0m=audio 50262 RTP/AVP 108 107 109 110 9 99 111 100 104 103 0 8 15 102 18 13 118 101a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48a=crypto:2 AEAD_AES_256_GCM ********************************************************************|2^48 a=crypto:3 AES_CM_128_HMAC_SHA1_80 *******************************************************|2^48 a=crypto:4 AES_CM_128_HMAC_SHA1_32 *******************************************************|2^48

m=video 50264 RTP/AVP 97 116 114 96 34 31 100 121 b=TIAS:16000a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48a=crypto:2 AEAD_AES_256_GCM ********************************************************************|2^48 a=crypto:3 AES_CM_128_HMAC_sha1_80 *******************************************************|2^48 a=crypto:4 AES_CM_128_HMAC_sha1_32 *******************************************************|2^48 a=content:main a=sendrecva=sprop-source:1 count=2;policies=cs:1 a=sprop-simul:1 1 * a=rtcp-fb:* nack pli a=rtcp-fb:* ccm fir a=rtcp-fb:* ccm cisco-scra=extmap:1 http://protocols.cisco.com/virtualid a=extmap:2 http://protocols.cisco.com/framemarking a=rtpmap:97 H264/90000 a=fmtp:97 profile-level-id=42800a;max-mpbs=489600;max-fs=8160;max-cpb=4000;max- dpd=4752;max-fps=6000Users report that they do not see a high-quality picture on the high-definition endpoints when they call into Cisco Meeting Server. An engineer must extract the SDP that is offered by Cisco Meeting Server from the SIP traces to troubleshoot. What is the cause of this issue?

A. Cisco Meeting Server is not configured for H

B. The AES ciphers are not compatible with high-definition video calling

C. The Content-Length value in the SDP does not support high-definition video calling

D. The SIP call bandwidth is not at a value that supports high-definition video calling

عرض الإجابة

اجابة صحيحة: D

السؤال #15

Which Expressway-E service or protocol is required for external web app participants to join a Cisco Meeting Server version 3.0 conference as guests?

A. XMPP

B. TURN

C. SIP

D. H

عرض الإجابة

اجابة صحيحة: B

السؤال #16

Which Expressway - E service or protocol is required for external web app participants to join a Cisco Meeting Server version 3.0 conference as guests?

A. XMPP

B. TURN

C. SIP

D. H

عرض الإجابة

اجابة صحيحة: B

السؤال #17

An engineer configures Cisco Meeting Server as a conference resource for Cisco UCM. Cisco UCM has a secure SIP trunk to Cisco Meeting Server, but the server does not register to Cisco UCM. Which configuration resolves this issue?

A. Ensure that the SIP trunk from Cisco UCM to Cisco Meeting Server is a secure trunk using port 5061

B. Add Cisco Meeting Server to the Cisco UCM SIP trunk with an IP address and not an FQDN

C. Set the Web Admin port on the Conference Bridge settings to match Cisco Meeting Server

D. Configure an MRGL that contains Cisco Meeting Server to be associated with device pools

عرض الإجابة

اجابة صحيحة: D

السؤال #18

Refer to the exhibit.Content-Type: application/sdp Content-Length: 4938v=0o=Acano 0 0 IN IP4 10.0.101.120s=-c=IN IP4 10.0.101.120b=CT:16 t=0 0m=audio 50262 RTP/AVP 108 107 109 110 9 99 111 100 104 103 0 8 15 102 18 13 118 101a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48a=crypto:2 AEAD_AES_256_GCM ********************************************************************|2^48 a=crypto:3 AES_CM_128_HMAC_SHA1_80 *******************************************************|2^48 a=crypto:4 AES_CM_128_HMAC_SHA1_32 *******************************************************|2^48

m=video 50264 RTP/AVP 97 116 114 96 34 31 100 121 b=TIAS:16000a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48a=crypto:2 AEAD_AES_256_GCM ********************************************************************|2^48 a=crypto:3 AES_CM_128_HMAC_sha1_80 *******************************************************|2^48 a=crypto:4 AES_CM_128_HMAC_sha1_32 *******************************************************|2^48 a=content:main a=sendrecva=sprop-source:1 count=2;policies=cs:1 a=sprop-simul:1 1 * a=rtcp-fb:* nack pli a=rtcp-fb:* ccm fir a=rtcp-fb:* ccm cisco-scra=extmap:1 http://protocols.cisco.com/virtualid a=extmap:2 http://protocols.cisco.com/framemarking a=rtpmap:97 H264/90000 a=fmtp:97 profile-level-id=42800a;max-mpbs=489600;max-fs=8160;max-cpb=4000;max- dpd=4752;max-fps=6000Users report that they do not see a high-quality picture on the high-definition endpoints when they call into Cisco Meeting Server. An engineer must extract the SDP that is offered by Cisco Meeting Server from the SIP traces to troubleshoot. What is the cause of this issue?

A. Cisco Meeting Server is not configured for H

B. The AES ciphers are not compatible with high-definition video calling

C. The Content-Length value in the SDP does not support high-definition video calling

D. The SIP call bandwidth is not at a value that supports high-definition video calling

عرض الإجابة

اجابة صحيحة: D

السؤال #19

Refer to the exhibit.Content-Type: application/sdp Content-Length: 4938v=0o=Acano 0 0 IN IP4 10.0.101.120s=-c=IN IP4 10.0.101.120b=CT:16 t=0 0m=audio 50262 RTP/AVP 108 107 109 110 9 99 111 100 104 103 0 8 15 102 18 13 118 101a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48a=crypto:2 AEAD_AES_256_GCM ********************************************************************|2^48 a=crypto:3 AES_CM_128_HMAC_SHA1_80 *******************************************************|2^48 a=crypto:4 AES_CM_128_HMAC_SHA1_32 *******************************************************|2^48

m=video 50264 RTP/AVP 97 116 114 96 34 31 100 121 b=TIAS:16000a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48a=crypto:2 AEAD_AES_256_GCM ********************************************************************|2^48 a=crypto:3 AES_CM_128_HMAC_sha1_80 *******************************************************|2^48 a=crypto:4 AES_CM_128_HMAC_sha1_32 *******************************************************|2^48 a=content:main a=sendrecva=sprop-source:1 count=2;policies=cs:1 a=sprop-simul:1 1 * a=rtcp-fb:* nack pli a=rtcp-fb:* ccm fir a=rtcp-fb:* ccm cisco-scra=extmap:1 http://protocols.cisco.com/virtualid a=extmap:2 http://protocols.cisco.com/framemarking a=rtpmap:97 H264/90000 a=fmtp:97 profile-level-id=42800a;max-mpbs=489600;max-fs=8160;max-cpb=4000;max- dpd=4752;max-fps=6000Users report that they do not see a high-quality picture on the high-definition endpoints when they call into Cisco Meeting Server. An engineer must extract the SDP that is offered by Cisco Meeting Server from the SIP traces to troubleshoot. What is the cause of this issue?

A. Cisco Meeting Server is not configured for H

B. The AES ciphers are not compatible with high-definition video calling

C. The Content-Length value in the SDP does not support high-definition video calling

D. The SIP call bandwidth is not at a value that supports high-definition video calling

عرض الإجابة

اجابة صحيحة: D

السؤال #20

Refer to the exhibit.An administrator troubleshoots an issue with Cisco Meeting Server. Endpoints that call from the remote site cannot connect, but endpoints that call from headquarters can connect. What should the administrator do to resolve this issue?

A. Add a route for 192

B. Set interface b as the default interface

C. Remove the route for 192

D. Enable DHCP on interface a but not on interface b

عرض الإجابة

اجابة صحيحة: A

لا تريد أن تفوت شيئا؟

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع!
احصل الان

عرض الإجابات بعد التقديم

لا تريد أن تفوت شيئا؟

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع! احصل الان

عرض الإجابات بعد التقديم

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع!
احصل الان