لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
An enterprise is experiencing transmission errors and excessive delays over their WAN when backing up user workstations. A systems architect decided to resolve the problems by centralizing data storage and processing to within the confines of the data center. Which technology is most suitable to mitigate the issues?
A. DC
B. DI
C. oS
D. AS
عرض الإجابة
اجابة صحيحة: B

View The Updated 300-610 Exam Questions

SPOTO Provides 100% Real 300-610 Exam Questions for You to Pass Your 300-610 Exam!

Contact Us Get 300-610 Practice Test
السؤال #2
Refer to the exhibit. An engineer must connect the four-port Cisco UCS VIC adapter to the fabric extenders. Which connectivity implements a port-channel standalone mode?
A.
B.
C.
D.
عرض الإجابة
اجابة صحيحة: C
السؤال #3
Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?
A. HyperFlex Edge support
B. encryption offload cards
C. dedicated compute nodes
D. fabric interconnects
عرض الإجابة
اجابة صحيحة: A
السؤال #4
A network architect designs the iSCSI-based storage area network solution. The iSCSI datastore must be designed with high availability, minimal downtime, and no single point of failure. The requirement is to fail over I/O to alternate paths based on SCSI sense codes without reliance on network failures.Which feature must be deployed to meet these requirements?
A. hardware-based flow control
B. port security
C. iSCSI multipath
D. NIC teaming
E. Reveal Answer
عرض الإجابة
اجابة صحيحة: C
السؤال #5
Refer to the exhibit.A Cisco engineer is configuring a next-generation Cisco HyperFlex HX data platform with 2 x Cisco UCS 6248UP fabric interconnects. 8 x Cisco HX-Series HX240c-M4SX servers, plus 8 x Cisco UCS B200-M4 blade servers Cisco UCS 5108 blade chassis, and Cisco UCS 2204XP fabric extenders The solution is configured with HX Release 4 5(2a) using VMware ESXi 7 0 U2 After the engineer migrates all customer VMs to the new solution platform, the engineer decides to create HX Native snapshots for all the VMs The engineer performs the operation and notices that some of the VMs are not creating snapshots. What is the most probable reason that the HX Native snapshots are not created?
A. Virtual machines are in suspended state
B. The servers have duplicate names
C. The source disk is thick provisioned
D. The node has insufficient datastore space
عرض الإجابة
اجابة صحيحة: C
السؤال #6
Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?
A. HyperFlex Edge support
B. encryption offload cards
C. dedicated compute nodes
D. fabric interconnects
عرض الإجابة
اجابة صحيحة: A
السؤال #7
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC the member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations. Which two features must be used to prevent these situations from happening in the future? (Choose two.)
A. auto-recovery
B. system priority
C. delay restore
D. ip arp synchronize
E. peer-gateway
عرض الإجابة
اجابة صحيحة: AC
السؤال #8
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
A. Connect the VDCs to an external Layer 3 device
B. Cross-connect the ports between the VDCs
C. Create VRF-aware software infrastructure interfaces
D. Create a policy map in the default VDC that routes traffic between the VDCs
E. Create interfaces in the VDC that can be accessed by another VDC
عرض الإجابة
اجابة صحيحة: AD
السؤال #9
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
A. vPC+
B. E-Trunk
C. SAN port channel
D. LACP port channel
عرض الإجابة
اجابة صحيحة: D
السؤال #10
Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?
A. HyperFlex Edge support
B. encryption offload cards
C. dedicated compute nodes
D. fabric interconnects
عرض الإجابة
اجابة صحيحة: A
السؤال #11
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
A. FD
B. DLD
C. CP
D. LDP
عرض الإجابة
اجابة صحيحة: B
السؤال #12
Which address pool is used when a vHBA template is created?
A. AMAC
B. BWWPN
C. CIP
D. DUUID
عرض الإجابة
اجابة صحيحة: B
السؤال #13
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
A. supports Layer 3 port channels
B. disables spanning-tree
C. no spanning-tree blocked ports
D. uses all available uplink bandwidth
E. maintains single control plane
عرض الإجابة
اجابة صحيحة: CD
السؤال #14
Refer to the exhibit.An engineer must assign multiple Fibre Channel IDs to a single port channel.Which two features must be enabled this goal? (Choose two.)
A. SAN Pin Groups on the Cisco UCS Fabric Interconnects
B. NPV feature on the Cisco MDS Series
C. end-host mode feature on the Cisco UCS Fabric Interconnects
D. NPIV feature on the Cisco MDS Series
E. Smart Zoning feature on the Cisco UCS Fabric Interconnects
عرض الإجابة
اجابة صحيحة: BD
السؤال #15
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)
A. HA
B. VSS
C. FT
D. VDP
E. DRS
عرض الإجابة
اجابة صحيحة: AE
السؤال #16
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
A. network speed
B. GPU support
C. storage capacity
D. processor count
عرض الإجابة
اجابة صحيحة: C
السؤال #17
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
A. network speed
B. GPU support
C. storage capacity
D. processor count
عرض الإجابة
اجابة صحيحة: C
السؤال #18
A company must integrate an iSCSI storage solution into its existing production environment. The new iSCSI network must be accessible from a limited set of network segments. The client devices follow a strict network security policy to access critical data from the storage array.
A. Place the iSCSI storage appliance on the core switch to isolate it in a private VLAN
B. Deploy the iSCSI storage appliance on the core switch in a separate VRF
C. Connect the iSCSI storage appliance on the core switch using a dedicated port
D. Connect the iSCSI storage appliance on the core switch in vPC mode
عرض الإجابة
اجابة صحيحة: B
السؤال #19
An engineer must choose the World Wide Port Name for the Cisco UCS Fibre Channel virtual host bus adapter.Which identifier must be used?
A. naa
B. fe80::314e:4566:8702:bf3d
C. iqn
D. 20:00:00:25:B5:97:c3:ac
E. Reveal Answer
عرض الإجابة
اجابة صحيحة: D
السؤال #20
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
A. vPC+
B. E-Trunk
C. SAN port channel
D. LACP port channel
عرض الإجابة
اجابة صحيحة: D
السؤال #21
A network architect must design a large-scale Cisco SAN topology. The customer has a limited budget, so a design that provides use of resources is required. To support this requirement, the architect to share array ports, ISL, and line card bandwidth. The customer has also presented these additional considerations:- The customers plans to expand the network by 10% over the next twoyears.- The customer's policy requires physically separated infrastructure to support high availability.Which solution should be used to meet these requirements?
A. esh
B. dge-core-edge
C. ollapsed-core
D. ore-edge
عرض الإجابة
اجابة صحيحة: D
السؤال #22
The user traffic destined to all web servers located in the data center must pass first through a set of firewalls for deep packet inspection. A network architect must design the Cisco Intelligent Traffic Director (ITD) deployment that meets these requirements:The firewalls are connected to a set of two Cisco Nexus switches to provide stateful handling of traffic.The ITD service is provided for inside and outside segments of the firewall.Which ITD deployment mode must be implemented to meet these requirements?
A. server load-balancing deployment mode
B. server vPC deployment mode
C. one-arm deployment mode
D. sandwich deployment mode
E. Reveal Answer
عرض الإجابة
اجابة صحيحة: C
السؤال #23
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)
A. HA
B. VSS
C. FT
D. VDP
E. DRS
عرض الإجابة
اجابة صحيحة: AE
السؤال #24
BGP and VRF configurations are already in place. An engineer must leak routes from the default VRF to TENANT_1 VRF and TENANT_2 VRF, but not between the nondefault VRFs. Which feature allows the engineer to accomplish this task?
A. oute targets
B. GP redistribution
C. RF default map
D. oute distinguishers
عرض الإجابة
اجابة صحيحة: A
السؤال #25
Which programming model is vendor-agnostic and combines operational and configuration data in the same container?
A. OpenConfig
B. IETF
C. open YANG
D. native YANG
عرض الإجابة
اجابة صحيحة: A
السؤال #26
What is a design consideration when implementing FSPF?
A. outes are based on the domain ID
B. outes are based on the distance vector protocol
C. SPF runs only on F Ports
D. SPF runs on a per-chassis basis
عرض الإجابة
اجابة صحيحة: A
السؤال #27
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)
A. HA
B. VSS
C. FT
D. VDP
E. DRS
عرض الإجابة
اجابة صحيحة: AE
السؤال #28
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
A. P redirects
B. low control
C. roxy ARP
D. SRP
عرض الإجابة
اجابة صحيحة: C
السؤال #29
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?
A. Embedded RP
B. Phantom RP
C. MSDP
D. PIM anycast RP
عرض الإجابة
اجابة صحيحة: D
السؤال #30
What is an advantage of using OTV as compared to VPLS for data center redundancy?
A. prevents loops on point-to-point links
B. provides head-end replication
C. uses a proactive MAC advertisement
D. provides full-mesh connectivity
عرض الإجابة
اجابة صحيحة: A
السؤال #31
A network engineer needs to configure a high availability feature for a data center that uses a Cisco Nexus 7700 Series Switch that is configured with dual supervisors. The feature must meet these requirements:- Network resilience must be ensured- Network instability for Layer 3 external routing protocols must bereduced- Neighbors must be notified when the control plane is restarting- Traffic must still be forwarded to peers while neighbor relationships are restarting What should be used to meet these requirements?
A. SR
B. raceful restart
C. SF
D. FD
عرض الإجابة
اجابة صحيحة: B
السؤال #32
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches.How is out-of-band management access provided for each VDC?
A. ll the VDC have the same out-of-band IP address
B. ach VDC has a dedicated out-of-band Ethernet management port
C. ach VDC has a unique out-of-band IP address from the same IP subnet
D. ach VDC has a unique out-of-band IP address from different IP subnets among VDCs
عرض الإجابة
اجابة صحيحة: C
السؤال #33
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)
A. HA
B. VSS
C. FT
D. VDP
E. DRS
عرض الإجابة
اجابة صحيحة: AE
السؤال #34
An engineer deploys LISP VM mobility.Which feature is configured on the interfaces that have VM mobility enabled?
A. IP redirects
B. flow control
C. proxy ARP
D. HSRP
عرض الإجابة
اجابة صحيحة: C
السؤال #35
Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?
A. HyperFlex Edge support
B. encryption offload cards
C. dedicated compute nodes
D. fabric interconnects
عرض الإجابة
اجابة صحيحة: A
السؤال #36
Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?
A. HyperFlex Edge support
B. encryption offload cards
C. dedicated compute nodes
D. fabric interconnects
عرض الإجابة
اجابة صحيحة: A
السؤال #37
To help automate the vHBA configuration process, a network engineer is configuring vHBA template pairs on UCS.
A. The description configuration will be shared between the two templates
B. The WWPN pool configuration will not be shared between the two templates
C. The fabric ID configuration will be shared between the two templates
D. The QoS policy configuration will not be shared between the two templates
عرض الإجابة
اجابة صحيحة: B
السؤال #38
Which feature must be configured to connect a classical Ethernet network to a data center networkso that the data center network appears to be one large switch.
A. PC+
B. DLD
C. VPN
D. SPF
عرض الإجابة
اجابة صحيحة: C
السؤال #39
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
A. vPC+
B. E-Trunk
C. SAN port channel
D. LACP port channel
عرض الإجابة
اجابة صحيحة: D
السؤال #40
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
A. BGP ECMP
B. Layer 4 to Layer 7 device package
C. inline load-balancing device
D. ITD
عرض الإجابة
اجابة صحيحة: B
السؤال #41
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
A. IP redirects
B. flow control
C. proxy ARP
D. HSRP
عرض الإجابة
اجابة صحيحة: C
السؤال #42
An engineer manages hundreds of Cisco Nexus Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive support, and is object-oriented. Which automation tool should be used to meet these requirements?
A. Phython
B. Bash
C. YAML
D. Perl
عرض الإجابة
اجابة صحيحة: A
السؤال #43
A network engineer is connecting a backup server to the given network. The server has three available physical Ethernet interfaces - dual 1Gbps interfaces, plus a single 10Gbps interface - and all devices support virtual port channels. The engineer must minimize backup time from hosts on the network, with a mandate for no single point of failure connectivity within the data center and the interfaces either active or passive. Which deployment model must the engineer use?
A.
B.
C.
D.
عرض الإجابة
اجابة صحيحة: D
السؤال #44
Which two features are provided by deploying an OOB management network in a Cisco Nexus data center? (Choose two.)
A. Layer 3 path for monitoring purposes
B. Layer 2 path for server traffic
C. Layer 2 path for a vPC peer link
D. Layer 3 path for vPC keepalive packets
E. Layer 3 path for server traffic
عرض الإجابة
اجابة صحيحة: AD
السؤال #45
Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?
A. HyperFlex Edge support
B. encryption offload cards
C. dedicated compute nodes
D. fabric interconnects
عرض الإجابة
اجابة صحيحة: A
السؤال #46
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
A. network speed
B. GPU support
C. storage capacity
D. processor count
عرض الإجابة
اجابة صحيحة: C
السؤال #47
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
A. onnect the VDCs to an external Layer 3 device
B. ross-connect the ports between the VDCs
C. reate VRF-aware software infrastructure interfaces
D. reate a policy map in the default VDC that routes traffic between the VDCs
E. reate interfaces in the VDC that can be accessed by another VDC
عرض الإجابة
اجابة صحيحة: AD
السؤال #48
What is a design consideration when implementing FSPF?
A. Routes are based on the domain ID
B. Routes are based on the distance vector protocol
C. FSPF runs only on F Ports
D. FSPF runs on a per-chassis basis
عرض الإجابة
اجابة صحيحة: A
السؤال #49
What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choosetwo.)
A. t propagates hosts reachability without support of traffic flooding
B. ayer 3 failures do not propagate beyond the OTV edge device
C. t extends the spanning tree between data centers
D. t is an open standard
E. t constrains HSRP hello messages to each data center
عرض الإجابة
اجابة صحيحة: BC

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:
Contact Us


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.