Which node performs the LISP Map-Server and Map-Resolver functions in the Cisco SD-Access network architecture?

An engineer must connect a new remote site to an existing OSPF network. The new site consists of two low-end routers, one for WAN, and one for LAN. There is no demand for traffic to pass through this area. Which area type does the engineer choose to provide minimal router resource utilization, while still allowing for full connectivity to the rest of the network?

An architect must develop a campus network solution that includes:
1.logically segmented and isolated networks
2.ability to communicate between network segments when required
3.support for overlapping IP addresses
4.widely available technologies to avoid purchasing specialized equipment

Which solution must the architect select?

How is Internet access provided to a WAN Edge router that is connected to a MPLS transport link?

Which type of rendezvous point deployment is standards-based and supports dynamic RP discovery?

An engineer must design a QoS solution for a customer that is connected to an ISP over a 1Gbps link with a 100Mbps CIR. The ISP aggressively drops all traffic received over the CIR, which is causing numerous TCP retransmissions. The customer is not using any RTP applications but wants to maximize bandwidth usage up to the CIR. Which QoS solution should the engineer choose?

A client is moving to Model-Driven Telemetry and requires periodic updates. What must the network architect consider with this design?

A company uses cloud-based applications for voice and video calls, file sharing, content sharing, and messaging. During business hours, these applications randomly become slow and unresponsive. However, other applications work smoothly with the current applied QoS policies. Which solution must the company choose to resolve the issue?

Which design element should an engineer consider when multicast is included in a Cisco SD-Access architecture?

An engineer is designing an IPv4 addressing plan for an enterprise with 1000 branches. Each branch requires a prefix for data and a prefix for voice. Each prefix must accommodate up to 128 hosts, and prefixes must facilitate summarization at aggregation points in the network. The security team requires a simple method for identifying voice prefixes. Which allocation does the engineer recommend from the RFC1918 address space?