لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت

السؤال #1
Refer to the exhibit. Which image corresponds to the packet capture shown in the exhibit? A) B) C) D)
A. Option A
B. Option B
C. Option C
D. Option D
عرض الإجابة
اجابة صحيحة: A
السؤال #2
What are offline logs on FortiAnalyzer?
A. Compressed logs, also known as archive logscorrect
B. Logs that are indexed and stored in the SQL database
C. Any logs collected from offline devices after they boot up
D. Real-time logs that are not yet indexed
عرض الإجابة
اجابة صحيحة: A
السؤال #3
If you upgrade the FortiAnalyzer firmware, which report element can be affected?
A. Custom datasetscorrect
B. Report scheduling
C. Report settings
D. Output profiles
عرض الإجابة
اجابة صحيحة: A
السؤال #4
In a Fortinet Security Fabric, what can make an upstream FortiGate create traffic logs associated with sessions initiated on downstream FortiGate devices?
A. The traffic destination is another FortiGate in the fabric
B. The upstream FortiGate is configured to do NATcorrect
C. Log redundancy is configured in the fabric
D. The downstream device cannot connect to FortiAnalyzer
عرض الإجابة
اجابة صحيحة: B
السؤال #5
After you have moved a registered logging device out of one ADOM and into a new ADOM, what is the purpose of running the following CLI command? execute sql-local rebuild-adom
A. To reset the disk quota enforcement to default
B. To remove the analytics logs of the device from the old database
C. To migrate the archive logs to the new ADOM
D. To populate the new ADOM with analytical logs for the moved device, so you can run reportscorrect
عرض الإجابة
اجابة صحيحة: D
السؤال #6
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)
A. Logs from registered devices
B. Database snapshot
C. Report information
D. System information
عرض الإجابة
اجابة صحيحة: CD
السؤال #7
An administrator has configured the following settings: config system global set log-checksum md5-auth end What is the significance of executing this command?
A. This command records the log file MD5 hash value
B. This command records passwords in log files and encrypts them
C. This command encrypts log transfer between FortiAnalyzer and other devices
D. This command records the log file MD5 hash value and authentication code
عرض الإجابة
اجابة صحيحة: D
السؤال #8
Refer to the exhibit. Based on the partial outputs displayed, which devices can be members of a FortiAnalyzer Fabric?
A. All devices listed can be members
B. FortiAnalyzerl and FortiAnalyzer3
C. FortiAnalyzer2 and FortiAnalyzer3
D. FortiAnalyzer1 and FortiAnalyzer2
عرض الإجابة
اجابة صحيحة: B
السؤال #9
What is the purpose of the FortiAnalyzer command diagnose system print netstat?
A. It provides network statistics for active connections, including the protocols, IP addresses, and connection states
B. It provides the complete routing table, including directly connected routes
C. It provides the static DNS table, including the host names and their expiration timers
D. It provides NTP server information, including server IPs, stratum, poll time, and latency
عرض الإجابة
اجابة صحيحة: A
السؤال #10
Which two methods can you use to restrict administrative access on FortiAnalyzer? (Choose two.)
A. Configure trusted hosts
B. Limit access to specific virtual domains
C. Fabric connectors to external LDAP servers
D. Use administrator profiles
عرض الإجابة
اجابة صحيحة: AD
السؤال #11
An administrator, fortinet, can view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mail server that can be used to send alert emails. What can be the problem?
A. ADOM mode is configured with Advanced mode
B. A trusted host is configured
C. fortinet is assigned the default Standard_User administrative profile
D. fortinet is assigned the default Restricted_User administrative profile
عرض الإجابة
اجابة صحيحة: C
السؤال #12
Which two parameters are used to calculate the Total Quota value available on FortiAnalyzer? (Choose two.)
A. Used storagecorrect
B. Retention policy
C. Reserved spacecorrect
D. Total system storagecorrect
عرض الإجابة
اجابة صحيحة: ACD
السؤال #13
Which statement when you are upgrading the firmware on an HA cluster made up of three FortiAnalyzer devices is true?
A. You can perform the firmware upgrade using only a console connection
B. All FortiAnalyzer devices will be upgraded at the same time
C. Enabling uninterruptible-upgrade prevents normal operations from being interrupted during the upgrade
D. First, upgrade the secondary devices, and then upgrade the primary device
عرض الإجابة
اجابة صحيحة: D
السؤال #14
What is the purpose of the FortiAnalyzer command diagnose system print netstat?
A. It is a device whose registration has not yet been accepted in FortiAnalvzer
B. It is a device that has not yet been assigned an ADOM
C. It is a device that is waiting for you to configure a pre-shared key
D. It is a device that FortiAnalvzer does not support
عرض الإجابة
اجابة صحيحة: A
السؤال #15
Refer to the exhibit. Based on the partial outputs displayed, which devices can be members of a FortiAnalyzer Fabric?
A. FortiAnalyzer1 and FortiAnalyzer3
B. All devices listed can be members
C. FortiAnalyzer1 and FortiAnalyzer2correct
D. FortiAnalyzer2 and FortiAnalyzer3
عرض الإجابة
اجابة صحيحة: C
السؤال #16
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
A. Shul down FortiAnalyzer and replace the disk
B. Perform a hot swap of the disk
C. Run execute format disk to format and restart the FortiAnalyzer device
D. There is no need to do anything because the disk will self-recover
عرض الإجابة
اجابة صحيحة: B
السؤال #17
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
A. A local wildcard administrator accountcorrect
B. A remote LDAP servercorrect
C. A trusted host profile that restricts access to the LDAP group
D. An administrator group
عرض الإجابة
اجابة صحيحة: AB
السؤال #18
In the FortiAnalyzer FortiView, source and destination IP addresses from FortiGate devices are not resolving to a hostname. How can you resolve the source and destination IP addresses, without introducing any additional performance impact to FortiAnalyzer?
A. Resolve IP addresses on a per-ADOM basis to reduce delay on FortiView while IPs resolve
B. Configure # set resolve-ip enable in the system FortiView settings
C. Configure local DNS servers on FortiAnalyzer
D. Resolve IP addresses on FortiGatecorrect
عرض الإجابة
اجابة صحيحة: D
السؤال #19
How can you attach a report to an incident?
A. By editing the settings of the desired report
B. From the properties of an existing incident
C. By attaching it to an event handler alert
D. Saving it in JSON format, and then importing it
عرض الإجابة
اجابة صحيحة: B
السؤال #20
Which feature can you configure to add redundancy to FortiAnalyzer?
A. Primary and secondary DNS
B. VLAN interfaces
C. IPv6 administrative access
D. Link aggregationcorrect
عرض الإجابة
اجابة صحيحة: D
السؤال #21
Refer to the exhibit. Which image corresponds to the packet capture shown in the exhibit? A) B) C) D)
A. Option Acorrect
B. Option B
C. Option C
D. Option D
عرض الإجابة
اجابة صحيحة: A
السؤال #22
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?
A. To properly correlate logscorrect
B. To use real-time forwarding
C. To resolve host names
D. To improve DNS response times
عرض الإجابة
اجابة صحيحة: A
السؤال #23
Refer to the exhibit. The capture displayed was taken on a FortiAnalyzer. Why is a single IP address shown as the source for all logs received?
A. FortiAnalyzer is using the device MAC addresses to differentiate their logs
B. The logs belong to devices that are part of a high availability (HA) cluster
C. FortiAnalyzer is receiving logs from the root FortiGate of a Security Fabric
D. The device sending logs has two VDOMs in the same ADO
عرض الإجابة
اجابة صحيحة: B
السؤال #24
What are two effects of enabling auto-cache in a FortiAnalyzer report? (Choose two.)
A. The size of newly generated reports is optimized to conserve disk space
B. FortiAnalyzer local cache is used to store generated reports
C. When new logs are received, the hard-cache data is updated automatically
D. The generation time for reports is decreased
عرض الإجابة
اجابة صحيحة: CD
السؤال #25
Which statement correctly describes RAID 10 (1+0) on FortiAnalyzer?
A. A configuration with four disks, each with 2 TB of capacity, provides a total space of 4 Tcorrect
B. B 11 combines mirroring striping and distributed parity to provide performance and fault tolerance
C. A configuration with four disks, each with 2 TB of capacity, provides a total space of 2 T
D. It uses striping to provide performance and fault tolerance
عرض الإجابة
اجابة صحيحة: A
السؤال #26
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
A. There is no need to do anything because the disk will self-recover
B. Run execute format disk to format and restart the FortiAnalyzer device
C. Perform a hot swap of the disk
D. Shut down FortiAnalyzer and replace the disk
عرض الإجابة
اجابة صحيحة: C
السؤال #27
What is the purpose of trigger variables?
A. To use information from the trigger to filter the action in a task
B. To display statistics about the playbook runtime
C. To store the start times of playbooks with On_Schedule triggers
D. To provide the trigger information to make the playbook start running
عرض الإجابة
اجابة صحيحة: B
السؤال #28
Refer to the exhibit. What is the purpose of configuring FortiAnalyzer with the settings displayed in the image?
A. To increase reliability
B. To expand bandwidth
C. To maximize resiliency
D. To improve securitycorrect
عرض الإجابة
اجابة صحيحة: D
السؤال #29
The connection status of a new device on FortiAnalyzer is listed as Unauthorized. What does that status mean?
A. It is a device whose registration has not yet been accepted in FortiAnalyzer
B. It is a device that has not yet been assigned an ADOM
C. It is a device that is waiting for you to configure a pre-shared key
D. It is a device that FortiAnalyzer does not support
عرض الإجابة
اجابة صحيحة: A
السؤال #30
For which two purposes would you use the command set log checksum? (Choose two.)
A. To help protect against man-in-the-middle attacks during log upload from FortiAnalyzer to an SFTP servercorrect
B. To prevent log modification or tamperingcorrect
C. To encrypt log communications
D. To send an identical set of logs to a second logging server
عرض الإجابة
اجابة صحيحة: AB

View The Updated Fortinet Exam Questions

SPOTO Provides 100% Real Fortinet Exam Questions for You to Pass Your Fortinet Exam!

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف: