An LTM Specialist has just manually failed the active LTM device over to the standby LTM device. The LTM Specialist notices the newly active LTM device is NOT currently receiving traffic. The LTM Specialist verifies the newly active device is responding to ARP but still no traffic is hitting the virtual servers. The LTM Specialist also notices that the virtual servers eventually start responding. What should be added to the configuration to resolve the problem?

A device group is made up of four members: LTM-A, LTM-B, LTM-C, and LTM-D. An LTM Specialist makes a configuration change on LTM-B. Later, a different LTM Specialist notices a "changes pending" message on all devices. When logged into LTM-D, the LTM Specialist attempts to config-sync to the device group. The sync operation fails. Why is the LTM Specialist on LTM-D unable to synchronize the configuration to the group?

An F5 LTM Specialist needs to perform an LTM device configuration backup prior to RMA swap. Which command should be executed on the command line interface to create a backup?

-- Exhibit -- Exhibit -- An LTM Specialist is reviewing the virtual server configuration on an LTM device. Which two actions should the LTM Specialist perform to minimize the virtual server configuration? (Choose two.)

While investigating the cause of a device failover, an LTM Specialist discovers the following events in /var/log/ltm: 01010029:5: Clock advanced by 518 ticks 01010029:5: Clock advanced by 505 ticks 01010029:5: Clock advanced by 590 ticks 01010029:5: Clock advanced by 568 ticks 01010029:5: Clock advanced by 1681 ticks 01010029:5: Clock advanced by 6584 ticks 01140029:5: HA daemon_heartbeat tmm fails action is failover and restart. 010c0026:5: Failover condition, active attempting to go standby. Which issue c

A failover event is recorded in the following log messages: Jan 01 00:56:56 BIG-IP notice mcpd[5318]: 01070727:5: Pool /Common/my-pool member /Common/10.0.0.10:80 monitor status down. Jan 01 00:56:56 BIG-IP notice sod[5855]: 010c0045:5: Leaving active, group score 10 peer group score 20. Jan 01 00:56:56 BIG-IP notice sod[5855]: 010c0052:5: Standby for traffic group /Common/traffic-group-1. Jan 01 00:56:56 BIG-IP notice sod[5855]: 010c0018:5: Standby Jan 01 00:57:06 BIG-IP notice logger: /usr/bin/tmipsecd --

Which command should the LTM Specialist use to determine the current system time?

In preparation for a maintenance task, an LTM Specialist performs a "Force to Standby" on LTM device Unit 1. LTM device Unit 2 becomes active as expected. The maintenance task requires the reboot of Unit 1. Shortly after the reboot is complete, the LTM Specialist discovers that Unit 1 has become active and Unit 2 has returned to standby. What would cause this behavior?

Given the log entry: 011f0005:3: HTTP header (32800) exceeded maximum allowed size of 32768 (Client sidE. vip=/Common/VS_web profile=http pool=/Common/ POOL_web client_ip=10.0.0.1) Which HTTP profile setting can be modified temporarily to resolve the issue?

An HA pair of LTM devices configured in Active-Standby mode stops responding to traffic and causes an outage. The Active device becomes Standby, but the partner device stays in Standby mode instead of taking over as Active. A reboot and restart of the services brings the LTM device to Active mode for a short time, but then it goes into Standby mode again. Which two configuration components caused this condition? (Choose two.)

The active LTM device in a high-availability (HA) pair performs a failover at the same time the network team reports an outage of a switch on the network. Which two items could have caused the failover event? (Choose two.)

An LTM device pair is configured for failover and connection mirroring. The LTM devices are configured with virtual servers for HTTP, HTTPS with SSL offload, and SSH. An event occurs that causes a failover. HTTP and SSH sessions active at the time of failover remain active, but HTTPS sessions are dropped. What is the root cause of this problem?

An LTM Specialist configures two LTM devices in a high-availability pair with trusts established and device groups configured properly using network failover. After several months, the LTM Specialist notices that changes made to one LTM device do NOT cause the synchronization status to update to "changes pending," and this device does NOT synchronize with the device group. Which two steps should the LTM Specialist take to identify the issue? (Choose two.)

An LTM Specialist is troubleshooting an issue where one LTM device in a three LTM device group is failing to synchronize after a synchronize to group command is issued. The LTM Specialist verifies there are no packet filters, port lock down, or network issues preventing the connection. What are two reasons the synchronization group is having issues? (Choose two.)

A failover event is recorded in the log messages: Jan 01 00:00:50 BIG-IP notice sod[5855]: 01140029:5: HA proc_running tmm fails action is go offline and down links. Jan 01 00:00:50 BIG-IP notice sod[5855]: 010c0050:5: Sod requests links down. Jan 01 00:00:50 BIG-IP notice sod[5855]: 010c0054:5: Offline for traffic group /Common/traffic-group-1. Jan 01 00:00:50 BIG-IP notice sod[5855]: 010c003e:5: Offline Jan 01 00:00:50 BIG-IP notice logger: /usr/bin/tmipsecd --tmmcount 4 ==> /usr/bin/bigstart stop racoon

-- Exhibit -- Exhibit -- An LTM Specialist is reviewing the 'test' partition. Which objects, in order, can be removed from the partition?

The output of a tmsh command is: ------------------------------------------------------------ Net::Interface Name Status Bits Bits Errs Errs Drops Drops Colli In Out In Out In Out sions ------------------------------------------------------------ 1.1 down 0 0 0 0 0 0 0 1.2 up 191.4K 0 0 0 374 0 0 1.3 down 0 0 0 0 0 0 0 1.4 up 22.5K 0 0 0 44 0 0 2.1 miss 0 0 0 0 0 0 0 2.2 miss 0 0 0 0 0 0 0 mgmt up 43.2G 160.0G 0 0 0 0 0 Which command was executed on the LTM device to show the output?

-- Exhibit -- Exhibit -- Which two items can be consolidated to simplify the LTM configuration? (Choose two.)