لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت

السؤال #1
In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two.)
A. frames that were sent with high credit
B. frames that were sent on the link but not yet received C
E. frames that were sent on the link and received
عرض الإجابة
اجابة صحيحة: A
السؤال #2
An engineer is converting a Cisco MDS switch to support NPIV mode. What should be considered when implementing the solution?
A. It requires mapping of external interface traffic
B. It must be enabled on VSAN 1 only
عرض الإجابة
اجابة صحيحة: A
السؤال #3
A POAP-enabled Cisco Nexus switch will not enter POAP mode. Which two conditions should be verified? (Choose two.)
A. No startup configuration is available
B. The switch is in bootup process
E. No Cisco NX-OS image is present on the bootflash
عرض الإجابة
اجابة صحيحة: B
السؤال #4
An engineer is implementing FCoE. Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?
A. It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface
B. It uses the Cisco Fabric Services protocol to exchange parameters between two peer links
عرض الإجابة
اجابة صحيحة: D
السؤال #5
Which statement is true about upgrading the firmware on a Cisco MDS storage switch with dual supervisors? A.Supervisors can be upgraded independently to test the new firmware.
B. The new firmware is loaded on the standby supervisor first
عرض الإجابة
اجابة صحيحة: CD
السؤال #6
An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)
A. vsan database vsan 10 interface vfc 10
B. interface vfc 10 bind interface ethernet 1/3 no shut C
E. interface fcoe 10 bind interface ethernet 1/3 no shut
عرض الإجابة
اجابة صحيحة: A
السؤال #7
Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?
A. switch(config-vsan-db)# vsan 100 interface vfc 31
B. switch(config-vsan-db)# vsan 100 fc 3/1 C
عرض الإجابة
اجابة صحيحة: A
السؤال #8
An engineer is configuring a VSAN on the network. Which option must be selected to create the VSAN?
A. Common/Global B
عرض الإجابة
اجابة صحيحة: AD
السؤال #9
Which two methods are available to manage an ACI REST API session authentication when a user is unauthenticated? (Choose two.)
A. POST to aaaUserLogin
B. GET to aaaListDomains C
E. POST to aaaLogin
عرض الإجابة
اجابة صحيحة: BD
السؤال #10
Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.)
A. disable Cisco Fabric Services
B. check the impact of the upgrade using the show install all impact command C
E. back up the configuration
عرض الإجابة
اجابة صحيحة: A
السؤال #11
What is required for using Puppet in a Cisco NX-OS environment? A.OpenNP
B. XML management interface C
عرض الإجابة
اجابة صحيحة: BE
السؤال #12
A Cisco MDS 9000 Series Storage Switch has reloaded unexpectedly. Where does the engineer look for the latest core dump file? A./mnt/recovery B./mnt/core C./mnt/logs D./mnt/pss
A Cisco MDS 9000 Series Storage Switch has reloaded unexpectedly. Where does the engineer look for the latest core dump file? A
عرض الإجابة
اجابة صحيحة: BE
السؤال #13
What are two types of FC/FCoE oversubscription ratios? (Choose two.)
A. switch processing power to end-node processing power
B. port bandwidth to uplink bandwidth C
E. host bandwidth to storage bandwidth
عرض الإجابة
اجابة صحيحة: B
السؤال #14
An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration?
A. Configure switchport speed 4000 under interface fc2/2
B. Configure the switchport monitor under interface fc2/2
E. Configure the switchport mode SD under interface fc2/2
عرض الإجابة
اجابة صحيحة: A
السؤال #15
Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot using POAP? (Choose two.)
A. POAP feature license
B. DHCP server to bootstrap IP information C
E. TFTP server that contains the configuration script
عرض الإجابة
اجابة صحيحة: C
السؤال #16
An engineer must ensure fabric redundancy when implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action enables fabric redundancy?
A. Use TE ports to connect to upstream switches
B. Add a port channel to upstream switches
عرض الإجابة
اجابة صحيحة: B
السؤال #17
An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches become isolated. What is wrong with the implementation?
A. Zones are local to the MDS switch and name service must be used to activate the connection between E Ports
B. Different zone set names must be configured on both MDS switches
عرض الإجابة
اجابة صحيحة: B
السؤال #18
What is a recommended design choice in a topology for multipathing iSCSI traffic?
A. single initiator to dual targets
B. two NICs bonded together on the initiator C
عرض الإجابة
اجابة صحيحة: AB
السؤال #19
What is an advantage of using Ansible for automation as compared to Puppet and Chef?
A. Ansible performs automation without installing a software agent on the target node
B. Ansible abstracts a scenario so that one set of configuration settings can be used across multiple operating systems
عرض الإجابة
اجابة صحيحة: AE
السؤال #20
The FCoE technology is used in a data center and the MDS switches are configured as Fibre Channel Forwarders. Which configuration should be applied to an MDS switch in order to be used as the best switch to connect by the CNAs in the fabric? A.fcoe fcf-priority 512 B.fcoe fcf-priority 0 C.no fcoe fcf-priority D.fcoe fcf-priority 1024
The FCoE technology is used in a data center and the MDS switches are configured as Fibre Channel Forwarders. Which configuration should be applied to an MDS switch in order to be used as the best switch to connect by the CNAs in the fabric? A
عرض الإجابة
اجابة صحيحة: A
السؤال #21
An administrator needs to configure an automated policy to shut down a link when a given threshold is exceeded on MDS switch. Which feature needs to be used? A.RMON B.EEM C.Call Home D.Scheduler
عرض الإجابة
اجابة صحيحة: B
السؤال #22
Which statement describes the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation?
A. The FCoE Initialization Protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fabric-provided MAC address
B. The FCoE Initialization Protocol uses the burned-in MAC address of the converged network adapter for all FCoE operations
عرض الإجابة
اجابة صحيحة: BD
السؤال #23
An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN. Which method does Cisco recommend to configure the SAN boot?
A. Define the vHBAs as bootable and leave the boot target definition empty
B. Create a SAN boot policy in which every initiator is mapped to a different target LUN
عرض الإجابة
اجابة صحيحة: D
السؤال #24
What is an advantage of NFS as compared to Fibre Channel?
A. NFS removes the impact of IP overhead
B. NFS enables thin provisioning for LUNs
عرض الإجابة
اجابة صحيحة: D
السؤال #25
Which product includes prebuilt templates that are available to be used to customize fabric deployments?
A. Cisco Tetration
B. Cisco Data Center Network Manager C
عرض الإجابة
اجابة صحيحة: D
السؤال #26
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?
A. Fibre Channel traffic is monitored only on one vHBA per server
B. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE
عرض الإجابة
اجابة صحيحة: DE
السؤال #27
Why does the Python code for Cisco NX-API print an error message?
A. The JSON is not a supported format for the NX-API
B. The "type" is wrong in the header of the request and should be "cli_conf" C
عرض الإجابة
اجابة صحيحة: CE
السؤال #28
An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action must be taken?
A. NPIV must be enabled on the upstream switch
B. The FCNS database must be disabled in the fabric
عرض الإجابة
اجابة صحيحة: A
السؤال #29
A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state. Which open-source tool meets this requirement? A.SaltStack B.Kubernetes C.Puppet D.Terraform
A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state. Which open-source tool meets this requirement? A
عرض الإجابة
اجابة صحيحة: B
السؤال #30
An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.)
A. MAC addresses B
عرض الإجابة
اجابة صحيحة: B
السؤال #31
Which two statements describe modifying Cisco UCS user accounts? (Choose two.)
A. Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect
B. The admin account is used only to log on by using SSH
E. The password of the user account expires in 30 days
عرض الإجابة
اجابة صحيحة: A
السؤال #32
What is required for using Ansible with HTTP/HTTPS protocol in a Cisco NX-OS environment?
A. XML management interface B
عرض الإجابة
اجابة صحيحة: D
السؤال #33
An engineer configures FCIP on a Cisco MDS 9000 Series switch. What is the result of implementing the configuration?
A. The switch attempts to make two TCP connections
B. Compression is performed by using hardware
عرض الإجابة
اجابة صحيحة: C

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف: