Topic 1An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 securityoptions are supported in this environment? (Choose two.)

Topic 1When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group namedBranchA-FCG?

Topic 1Refer to the exhibit. A customer has implemented Cisco FlexConnect deployments with different WLANs around the globeand is opening a new branch in a different location. The engineers task is to execute all the wireless configuration and tosuggest how to configure the switch ports for new APs. Which configuration must the switching team use on the switch port?

Topic 1An engineer must implement intrusion protection on the WLAN. The AP coverage is adequate and on-channel attacks arethe primary concern. The building is historic, which makes adding APs difficult. Which AP mode and submode must beimplemented?

Topic 1An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured onthe Cisco WLC to allow the user to print a printer on his home network?

Topic 1Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?

Topic 1An engineer is implementing a FlexConnect group for access points at a remote location using local switching but centralDHCP. Which client feature becomes available only if this configuration is changed?

Topic 1On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection tothe WLC, all clients are disconnected, and the SSID is no longer advertised. Considering that FlexConnect local switching isenabled, which setting is causing this behavior?

Topic 1A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors. When a code upgradeis performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured,how many image transfers between the WLC and APs will occur?

Topic 1A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants toutilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs tocontrol the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used toaccomplish this goal?