-- Exhibit -- Exhibit -- A failover has just occured on BIG-IP1. BIG-IP2 is now active and manages traffic as expected. Both Bigip's are set with a gateway failsafe to check the reachability of the main border router. Switches have performed as expected. Where should the LTM Specialist check for potential issues?

-- Exhibit -- Exhibit -- Users report that a web application works incorrectly. Sometimes contextual data displayed on the web pages is accurate; other times it is inaccurate. The LTM administrator looks at the connection table with a filter on one of the client IP addresses currently connected using the command "tmsh show sys connection cs-client-addr 10.0.20.1" with the following results: 10.0.20.1:60048 10.0.20.88:80 10.0.20.1:60048 172.16.20.1:80 tcp 3 (tmm: 0) 10.0.20.1:60050 10.0.20.88:80 10.0.20.1:60

-- Exhibit -- Exhibit -- An LTM Specialist has created a virtual server to load balance traffic to a pool of HTTPS servers. The servers use client certificates for user authentication. The virtual server has clientssl, serverssl, and http profiles enabled. Clients are unable to connect to the application through the virtual server. Clients are able to connect to the application servers directly. What is the root cause of the problem?

-- Exhibit -- Exhibit -- An LTM Specialist is performing an HTTP trace on the client side of the LTM device and notices there are many undesired headers being sent by the server in the response. The LTM Specialist wants to remove all response headers except "Set-Cookie" and "Location." How should the LTM Specialist modify the HTTP profile to remove undesired headers from the HTTP response?

-- Exhibit -- Exhibit -- A web application is configured to allow sessions to continue even after a user computer is shut down for the night. A new LTM device is configured to load balance the web application to several servers. The application owner reports that application users are logged out of the web application whenever their browser is restarted or computer is rebooted. What is the problem?

-- Exhibit -- Exhibit -- A pair of LTM devices are deployed in a high-availability (HA) pair as the diagram shows. After inserting a new rule on the firewalls, the LTM devices become Standby. The rule drops all outbound sessions to the Internet. Only inbound connections are allowed from the Internet. There are no other changes to the environment. What triggered the LTM device failover?

-- Exhibit -- Exhibit -- An LTM Specialist is troubleshooting an issue with SSL and is receiving the error shown when connecting to the virtual server. When connecting directly to the pool member, clients do NOT receive this message, and the application functions correctly. The LTM Specialist exports the appropriate certificate and key from the pool member and imports them into the LTM device. The LTM Specialist then creates the Client SSL profile and associates it with the virtual server. What is the issue

-- Exhibit -- Exhibit -- A user is unable to access an application. What is the root cause of the problem?

-- Exhibit -- Exhibit -- An LTM Specialist is troubleshooting an HTTP monitor that is marking a pool member as down. Connecting to the pool member directly through a browser shows the application is up and functioning correctly. ltm monitor http http_mon { defaults-from http destination *:* interval 5 recv "200 OK" send "GET /\\r\\n" time-until-up 0 timeout 16 } What is the issue?

-- Exhibit -- Exhibit -- An LTM Specialist creates a virtual server to load balance traffic to a pool of HTTPS servers. The servers use client certificates for user authentication. The virtual server has clientssl, serverssl, and http profiles enabled. Clients are unable to connect to the application through the virtual server, but they are able to connect to the application servers directly. Which change to the LTM device configuration will resolve the problem?

-- Exhibit -- Exhibit -- Refer to the exhibits. A virtual server has been configured for SSL offload on a single-arm network. On average, the virtual server will be handling 100,000 connections, with a peak of 130,000 connections. Between the virtual server and the web servers there is a single reverse proxy to provide site caching. The proxy is configured to perform source IP persistence before contacting the web servers. The site is logging users out immediately after logging them in. What should the LTM

-- Exhibit -- Exhibit -- An LTM Specialist has created a virtual server to balance connections to a pool of application servers and offload SSL decryption. Clients connect to the application at https://www.example.com/. The virtual server is configured with a clientssl profile but no serverssl profile. The application servers are listening on ports 80 and 443. Users are unable to connect to the application through the virtual server but are able to connect directly to the application server. What is the roo

-- Exhibit -- Exhibit -- An LTM Specialist is troubleshooting an HTTP monitor that is marking a pool member as down. Connecting to the pool member directly through a browser shows the application is up and functioning correctly. How should the send string be modified to correct this issue?

-- Exhibit -- Exhibit -- Refer to the exhibits. Which URL on which server is causing the highest latency for users?

-- Exhibit -- Exhibit -- Refer to the exhibits. How should the LTM Specialist minimize the configuration?

-- Exhibit -- Exhibit -- Refer to the exhibits. An LTM device has been configured for load balancing a number of different application servers. Configuration changes need to be made to the LTM device to allow administrative management of the servers in 172.16.10/24, 172.16.20/24, and 172.16.30/24 networks. The servers require outbound access to numerous destinations for operations. Which solution has the simplest configuration changes while maintaining functionality and basic security?

-- Exhibit -- Exhibit -- An LTM Specialist is troubleshooting a virtual server. Both the virtual server and the pool are showing blue squares for their statuses, and new clients report receiving "The connection was reset" through their browsers. Connections directly to the pool member are successful. What is the issue?

-- Exhibit -- Exhibit -- A pair of LTM devices are configured for HA. The LTM Specialist observes from a capture that there is a successful connection from a client directly to a web server and an unsuccessful connection from a client via the LTM device to the same web server. Which two solutions will solve the configuration problem? (Choose two.)

-- Exhibit -- Exhibit -- An LTM Specialist is troubleshooting a sync-failover group of three BIG-IP LTM devices. The command used is "tmsh run cm watch-devicegroup- device." What does the output mean?

-- Exhibit -- Exhibit -- Refer to the exhibits. Every monitor has the same Send String, Recv String, and an Alias of *:*. The LTM Specialist simplifies the configuration to minimize the number of monitors. How many unique monitors remain?

-- Exhibit -- Exhibit -- A pair of LTM devices is configured for HA. What happens if the pool member server with IP address 10.0.0.4 becomes totally unresponsive to the active LTM device, but is still responsive to the standby LTM device?

-- Exhibit -- Exhibit -- An LTM Specialist is troubleshooting an issue with a new virtual server. When connecting through the virtual server, clients receive the message "The connection was reset" in the browser. Connections directly to the pool member show the application is functioning correctly. What is the issue?

-- Exhibit -- Exhibit -- The virtual server is listening on port 443. What is the solution to the problem?

-- Exhibit -- Exhibit -- A user is unable to access a secure application via a virtual server. What is the cause of the issue?

-- Exhibit -- Exhibit -- An LTM Specialist sets up AVR alerts and notifications for a specific virtual server if the server latency exceeds 50ms. The LTM Specialist simulates a fault so that the server latency is consistently exceeding the 50ms threshold; however, no alerts are being received. Which configuration should the LTM Specialist modify to achieve the expected results?