Scenario: A Citrix Architect needs to deploy a NetScaler appliance for Workspacelab, which willprovide application load balancing services to Partnerlab and Vendorlab.The setup requirements are as follows:A pair of NetScaler MPX appliances will be deployed in the DMZ network.High availability will be accessible on the NetScaler MPX in the DMZ Network.Load balancing should be performed for the mail servers for Partnerlab and Vendorlab.The traffic for both of the organizations must be isolated.Separate Manage

Which four load-balancing methods support NetScaler Virtual Server-Level Slow Start? (Choose four.)

Scenario: A Citrix Architect needs to assess an existing on-premises NetScaler deployment which includes Advanced Endpoint Analysis scans. During a previous security audit, the team discovered that certain endpoint devices were able to perform unauthorized actions despite NOT meeting pre-established criteria. The issue was isolated to several endpoint analysis (EPA) scan settings. Click the Exhibit button to view the endpoint security requirements and configured EPA policy settings. Which setting is preven

Scenario: A Citrix Architect has deployed an authentication setup with a ShareFile load-balancing virtual server. The NetScaler is configured as the Service Provider and Portalguard server is utilized as the SAML Identity Provider. While performing the functional testing, the architect finds that after the users enter their credentials on the logon page provided by Portalguard, they get redirected back to the Netscaler Gateway page at uri /cgi/samlauth/ and receive the following error. “SAML Assertion verif

Scenario: A Citrix Architect needs to design a new NetScaler Gateway deployment to provide secureRDP access to backend Windows machines.Click the Exhibit button to view additional requirements collected by the architect during the designdiscussions.To meet the customer requirements, the architect should deploy the RDP proxy through _______,using a _________ solution. (Choose the correct option to complete the sentence.)

Scenario: A Citrix Architect needs to deploy Single Sign-on form-based authentication through Citrix ADC for Outlook Web Access (OWA) 2013 for the users of the domain workspacelab com The Single Sign-on (SSO) must be performed based on sAMAccountName. Which SSO action can the architect use to meet this requirement? add tm formSSOAction OWA_Form_SSO_SSOPro -actionURL '/owa/auth.owa' -userField username -passwdField password -ssoSuccessRule 'http.RES.SET_COOKIE.COOKIE(\'cadata\').VALUE(\'cadata\').LENGTH.GT(7

Scenario: A Citrix Architect needs to design a hybrid XenApp and XenDesktop environment which willinclude as well as resource locations in an on-premises datacenter and Microsoft Azure.Organizational details and requirements are as follows:Active XenApp and XenDesktop Service subscriptionNo existing NetScaler deploymentMinimization of additional costsAll users should correct directly to the resource locations containing the servers which will host HDXsessionsClick the Exhibit button to view the conceptual e

A Citrix Architect needs to define the architect and operational processes required to implement andmaintain the production environment.In which phase of the Citrix Methodology will the architect define this?

Scenario: Based on a discussion between a Citrix Architect and team of Workspacelab has been created across three (3) sites. They captured the following requirements during the design discussion held for NetScaler design projects: All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configuration and design. Both external and internal NetScaler MPX appliances will have Global Server Load balancing (GSLB) configured and deployed in Active/Passive mode. GSLB should resolve both A and

Scenario: A Citrix Architect needs to design a new NetScaler Gateway deployment for a customer.During the design discussions, the architect learns that the customer would like to allow externalRDP connections to internal Windows machines but does NOT want client drive redirection enabledon these connections.Where should the architect enable the options to allow the customer to complete theirrequirement?

For which three reasons should a Citrix Architect perform a capabilities assessment when designing and deploying a new NetScaler in an existing environment? (Choose three.)

Which two NetScaler cookies indicate the validity of the Authentication, Authorization andAccounting (AAA) session for users? (Choose two.)

Scenario: A Citrix Architect needs to assess an existing NetScaler configuration. The customerrecently found that members of certain administrator groups were receiving permissions on theproduction NetScaler appliances that do NOT align with the designed security requirements.Click the Exhibit button to view the configured command policies for the production NetScalerdeployment.To align the command policy configuration with the security requirements of the organization, the_______ for ______should change. (

Which step does a Citrix Architect need to ensure during the Define phase when following the Citrix Methodology?

A Citrix Architect needs to define the architect and operational processes required to implement and maintain the production environment. In which phase of the Citrix Methodology will the architect define this?

Which two features are supported on LbaaSV1? (Choose two.)

Under which two circumstances will a service be taken out of the slow start phase with automated slow start? (Choose two.)

Scenario: A Citrix Architect needs to configure a full VPN session profile to meet the followingrequirements:Users should be able to send the traffic only for the allowed networks through the VPN tunnel.Only the DNS requests ending with the configured DNS suffix workspacelab.com must be sent toNetScaler Gateway.If the DNS query does NOT contain a domain name, then DNS requests must be sent to NetScalergateway.Which settings will meet these requirements?

Scenario: A Citrix Architect is asked by management at the Workslab organization to review theirexisting configuration and make the necessary upgrades. The architect recommends small changes tothe pre-existing NetScaler configuration. Currently, the NetScaler MPX devices are configured in ahigh availability pair, and the outbound traffic is load-balanced between two Internet serviceproviders 9ISPs). However, the failover is NOT happening correctly.The following requirements were discussed during the design

Which NetScaler Management and Analytics System (NMAS) utility can a Citrix Architect utilize toverify the configuration template created by the NMAS StyleBook, before actually executing it on theNetScaler?

Scenario: More than 10,000 users will access a customers environment. The current networkinginfrastructure is capable of supporting the entire workforce of users. However, the number ofsupport staff is limited, and management needs to ensure that they are capable of supporting thefull user base.Which business driver is prioritized, based on the customers requirements?

Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites. They captured the following requirements during the design discussion held for a Citrix ADC design project: All three (3) Workspacelab sites (DC NDR and DR) will have similar Citrix ADC configurations and design Both external and internal Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed i

Scenario: A Citrix Architect needs to assess an existing NetScaler configuration. The customer recently found that members of certain administrator groups were receiving permissions on the production NetScaler appliances that do NOT align with the designed security requirements. Click the Exhibit button to view the configured command policies for the production NetScaler deployment. To align the command policy configuration with the security requirements of the organization, the _______ for ______should cha

Scenario: A Citrix Architect has set up NetScaler MPX devices in high availability mode with version 12.0.53.13 nc. These are placed behind a Cisco ASA 5505 Firewall. The Cisco ASA Firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall. The following requirements were captured by the architect during the discussion held as part of the NetScaler security implementation project with the customer’s security team: The NetScaler

Scenario: A Citrix Architect has deployed two MPX devices, 12.0.53.13 nc and MPX 11500 models, inhigh availability (HA) pair for the Workspace labs team. The deployment method is two-arm and thedevices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following featureson the NetScaler devices. Content Switching, SSL Offloading, Load Balancing, NetScaler Gateway,Application Firewall in hybrid security and Appflow. All are enabled to send monitoring informationto NMAS 12.0.53.13 nc bu

Scenario: A Citrix Architect needs to assess an existing NetScaler configuration. The customer recently found that certain user groups were receiving access to an internal web server with an authorization configuration that does NOT align with the designed security requirements. Click the Exhibit button view the configured authorization settings for the web server. Which item should the architect change or remove to align the authorization configuration with the security requirements of the organization?

Scenario: A Citrix Architect needs to assess an existing NetScaler gateway deployment. During the assessment, the architect collects key requirements for different user groups, as well as the current session profile settings that are applied to those users. Click the Exhibit button to view the information collected by the architect. Which configuration should the architect make to meet these requirements?

Which session parameter does the default authorization setting control when authentication,authorization, and auditing profiles are configured?