All nodes in a Cisco ACI fabric are raising NTP faults. The Date and Time policy is configured with the IP address of two NTP servers and both servers are reachable via the out-of-band management network. Also, the out-of-band EPG has been selected as the management EPG. Which configuration clears the NTP faults?

An engineer deploys a two-pod Cisco ACI Multi-Pod environment Why should no more than two Cisco APIC controllers be deployed in the same pod?

What is the purpose of the Overlay Multicast TEP in a Cisco ACI Multi-Site deployment?

An engineer is configuring ACI VMM domain integration with Cisco UCS-B Series. Which type of port channel policy must be configured in the vSwitch policy?

What is the result of selecting the On Demand attribute in the Deploy Immediacy feature during VMM domain association to an EPG?

A network administrator is configuring a Cisco ACI fabric to automatically take a snapshot of all the configurations once per week. The snapshot must be saved on a server that is located in the data center. Which configuration meets these requirements?

A Cisco ACI fabric is connected to an external Cisco Catalyst switch. Which set of actions must be taken for Cisco ACI leaf and spine switches to be managed from the management port?

Which protocol is used in a Multi-Pod topology to synchronize reachability information across pods?

An engineer must configure a service graph for the policy-based redirect to redirect traffic to a transparent firewall. The policy must be vendor-agnostic to support any firewall appliance. Which two actions accomplish these goals?

A network engineer must allow secure access to the Cisco ACI out-of-band (OOB) management only from external subnets 10.0.0.0/24 and 192.168.20.0/25. Which configuration set accomplishes this goal?

A network engineer configures the Cisco ACI fabric to connect to vCenter with these requirements:Port groups must be automatically created on the distributed virtual switch.Port groups must use the VLAN allocation in the range between 20-30.The deployment must optimize the CAM space on the leaf switches.Which set of actions meets these criteria?

An engineer created a monitoring policy called Test in a Cisco ACI fabric and had to change the severity level of the monitored object Call home source. Which set of actions prevent the event from appearing in event reports?

A network engineer must allow secure access to the Cisco ACI out-of-band (OOB) management only from external subnets 10.0.0.0/24 and 192.168.20.0/25. Which configuration set accomplishes this goal?

A Cisco ACI fabric contains a tenant called Prod. User_1 must have write access to tenant Prod and full access to the fabric access policy. Which set of actions must be taken to meet these requirements?

An SNMP monitoring service is added to a Cisco ACI fabric. The solution must meet these requirements:The notification must be generated when significant events occur during hardware-related events.The notification system must be redundant by using multiple servers to receive the notifications.Which set of actions meets these requirements?

A network engineer is implementing a Layer 3 Out in the Cisco ACI fabric. The data center core switches must connect to a pair of leaf switches and exchange routes via a routing protocol. In addition, the implementation must meet these criteria:The external switch interface must use 802.1Q tagging.Access to the internet for the ACI fabric must be the L3Out.The L3Out must use a routing protocol that has rapid convergence time and low CPU usage.Which configuration set meets these requirements?

An engineer is in the process of discovering a new Cisco ACI fabric consisting of two spines and four leaf switches. The discovery of leaf 1 has just been completed. Which two nodes are expected to be discovered next?

A Cisco ACI leaf switch receives an ARP request packet from a host that is attached to a bridge domain with unicast routing enabled. Which information does the leaf switch learn?

An engineer wants to configure Cisco ACI switches to use authenticated ZMQ when communicating with the proxy spine. Which configuration allows MD5 ZMQ messages only?