A network engineer is implementing the Cisco ACI Fabric and notices that the Leaf-1 switch is registered has an assigned name, but is displayed as inactive in the APIC. After further investigation, it became clear that the leaf switch was recently moved from another Cisco ACI environment. Which action resolves the problem?

An engineer configures FCoE between a set of ESXi hosts and a Cisco Nexus 5000 Series Switch. The Converged Network Adapter of the host fails to receive the response from the Cisco Nexus device. Also, the VFC interface is in a down state, and the FIP adapter fails to receive 802.1q tagged frames. The host interface is configured for VLAN trunking. Which action resolves the issue?

An engineer troubleshoots a Cisco UCS B-Series environment and discovers that the status of the CNA is degraded in the CLI and the Cisco UCS Manager GUI. What should be done to resolve the issue?

After an upgrade, the standby supervisor of the Cisco N9K-C9504 Series Switch fails to boot and displays the message SYSMGR-2-STANDBY_BOOT_FAILED. Which action resolves the issue?

An engineer is upgrading the Cisco UCS C240 M5 server's firmware using the Non-Interactive Host Upgrade Utility (NIHUU) tool and the Python script. The ISO mapping is configured as CIFS and the mount option parameter is specified in the NIHU configuration file. However, the NIHUU fails to upgrade due to the ISO mapping error. Which action resolves the issue?

Cisco UCS B-Series Blade Server is configured to boot a VMware ESXi host from an EMC VNX storage array by using a Fibre Channel SAN. The boot order is confirmed to be configured as expected, but the server fails to boot from the SAN. Which action resolves the problem?

Cisco UCS Manager raises a critical error message that indicates that the system has overlapping Ethernet and FCoE VLANs. All of the Ethernet traffic on the overlapping VLANs drops. Which action resolves the issue?

An engineer configures role-based access control for the Cisco UCS Manager. UserA must be allowed read-only access to the system. These events occur after the system is implemented: UserA attempts to log in but receives an "Authentication Failed" message. UserB successfully logs in by using an administrator role. Both users use valid LDAP passwords. Which action resolves the issue?

An engineer upgrades Cisco UCS firmware from release 3.1(2) to release 3.1(3) using AutoInstall. Both fabric interconnects go offline during the software upgrade installation and issue multiple FSM retries in the DeployPollActivate stage. Which set of actions resolves the issue?

A network engineer troubleshoots an issue at a Cisco data center environment with these conditions:1.The data center has Cisco Nexus 9000 Series Switches running the vPC setup.2.The gateway of the servers is an HSRP IP address between the VLAN interfaces configured on both Cisco Nexus switches.3.Some of the client application servers are implementing fast-path forwarding for the return traffic.4.Those servers are sending the return traffic to the VLAN interface MAC address instead of the HSRP MAC address.The network engineer discovers that some traffic is dropped because it passes the vPC peer link to be forwarded out the vPC interface. What must be configured on the vPC switches to resolve the issue?