An engineer must design a network for a company that uses OSPF LFA to reduce loops. Which type of lop would be reduced by using this design?

Which feature is supported by NETCONF but is not supported by SNMP?

Two routers R1 and R2 are directly connected through an Ethernet link Both routers are running OSPF over the Ethernet link and OSPF has been registered with BFD. R1 has been set up to transmit BFD at a 50 ms interval, but R2 can receive only at a 100 ms rate due to platform limitations. What does this mean?

Which project management methodology is characterized by a having a low client involvement?

A banking customer determines that it is operating POS and POI terminals that are noncompliant with PCI DSs requirements, as it is running TLSv1.0. The customer plans to migrate the terminals to TLSv1.2. What are two requirements to complete the migration? (Choose two.)

Company XYZ has multiple production units and marketing departments across the region. The current network is a mixture of point-to-point links and MPLS Layer 3 VPN service from the provider. The Info-Sec team has suggested to isolate production traffic end-to-end with an encryption over the transport network to comply with the HIPAA standard. Which solution must be used in their design if Company XYZ wants a quick roll out?

An enterprise plans to evolve from a traditional WAN network to a software-defined WAN network. The existing devices have limited capability when it comes to virtualization. As the migration is carried out, enterprise applications and services must not experience any traffic impact. Which implementation plan can be used to accommodate this during the migration phase?

A key to maintaining a highly available network is building in the appropriate redundancy to protect against failure. This redundancy is carefully balanced with the inherent complexity of redundant systems. Which design consideration is relevant for enterprise WAN use cases when it comes to resiliency?

A customer has a functional requirement that states HR systems within a data center must be segmented from other systems that reside in the same data center and same VLAN. The systems run legacy applications by using hard-coded IP addresses with all HR systems dedicated to .129 to .254 of the 10.20.20.0/24 prefix. Which segmentation method is optimal for the customer?

What is an architectural framework created by ETSI that defines standards to decouple network functions from proprietary hardware-based appliances and have them run in software on standard x86 servers?