لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
You have an Azure virtual network and an on-premises datacenter.You are planning a Site-to-Site VPN connection between the datacenter and the virtual network.Which two resources should you include in your plan? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: BG
السؤال #2
You are planning an Azure Point-to-Site (P2S) VPN that will use OpenVPN.Users will authenticate by an on-premises Active Directory domain.Which additional service should you deploy to support the VPN authentication?
A. n Azure key vault
B. RADIUS server
C. certification authority
D. zure Active Directory (Azure AD) Application Proxy
عرض الإجابة
اجابة صحيحة: B
السؤال #3
SIMULATIONUsername and passwordUse the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Azure Username: User-12345678@cloudslice.onmicrosoft.comAzure Password: xxxxxxxxxxIf the Azure portal does not load successfully in the browser, press CTRL-K to reload theportal in a new browser tab.The following information is for technical
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have two Azure virtual networks named Vnet1 and Vnet2.You have a Windows 10
A. es
B. o
عرض الإجابة
اجابة صحيحة: A
السؤال #5
You have the on-premises networks shown in the following table.You have an Azure subscription that contains an Azure virtual WAN named VWAN1 and a virtual network named VNet1. VWAN is connected to the on-premises networks and VNet1 in a full mesh topology. The virtual hub routing preference for VWAN1 is AS Path.You need to route traffic from VNet1 to 10.61.1.5.Which path will be used?
A. he VPN connection to Branch1
B. he VPN connection to Branch2
C. he ExpressRoute connection to Branch2
D. he ExpressRoute connection to Branch3
عرض الإجابة
اجابة صحيحة: D
السؤال #6
You have 10 on-premises networks that are connected by using a 3rd party Software Defined Wide Area Network (SD-WAN) solution. You have an Azure subscription that contains five virtual networks.You plan to connect the Azure virtual networks and the on-premises networks by using an Azure Virtual WAN with a single virtual WAN hub.You need to ensure that the Azure Virtual WAN can act as a node in the 3rd party SD-WAN solution.What should you include in the solution?
A. n Azure Virtual WAN ExpressRoute gateway
B. Network Virtual Appliance (NVA)
C. Site to site gateway (VPN gateway)
D. Point to site gateway (User VPN gateway)
عرض الإجابة
اجابة صحيحة: B
السؤال #7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have two Azure virtual networks named Vnet1 and Vnet2.You have a Windows 10
A. es
B. o
عرض الإجابة
اجابة صحيحة: B
السؤال #8
SIMULATIONUsername and passwordUse the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Azure Username: User-12345678@cloudslice.onmicrosoft.comAzure Password: xxxxxxxxxxIf the Azure portal does not load successfully in the browser, press CTRL-K to reload theportal in a new browser tab.The following information is for technical
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #9
You have an Azure subscription that contains a virtual network named VNet1 and the virtual machines shown in the following table.All the virtual machines are connected to Vnet1.You need to ensure that the applications hosted on the virtual machines can be accessed from the internet. The solution must ensure that the virtual machines share a single public IP address.What should you use?
A. n internal load balancer
B. zure Application Gateway
C. NAT gateway
D. public load balancer
عرض الإجابة
اجابة صحيحة: D
السؤال #10
HOTSPOT (Drag and Drop is not supported)You have the Azure resources shown in the following table.WebApp1 uses the Standard pricing tier.You need to ensure that WebApp1 can access the virtual machines deployed to Vnet1\Subnet1 and Vnet2\Subnet1. The solution must minimize costs.What should you create in each virtual network? To answer, select the appropriate options in the answer area.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have two Azure virtual networks named Vnet1 and Vnet2.You have a Windows 10
A. es
B. o
عرض الإجابة
اجابة صحيحة: B
السؤال #12
HOTSPOT (Drag and Drop is not supported)Your company has 10 instances of a web service. Each instance is hosted in a different Azure region and is accessible through a public endpoint.The development department at the company is creating an application named App1. Every 10 minutes, App1 will use a list of endpoints and connect to the first available endpoint.You plan to use Azure Traffic Manager to maintain the list of endpoints.You need to configure a Traffic Manager profile that will minimize the impact o
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #13
HOTSPOT (Drag and Drop is not supported)Your on-premises network contains a server named DNS1 that runs Windows Server 2022. DNS1 has the DNS server role and an IP address of 10.1.0.1. The network contains computers that use DNS1 for name resolution.You have an Azure subscription that contains the resources shown in the following table.The on-premises network connects to Vnet1 by using a Site-to-Site VPN.You need to ensure that the computers on the on-premises network can resolve the IP address for sql1.pri
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #14
HOTSPOT (Drag and Drop is not supported)You have an on-premises network.You have an Azure subscription that contains the resources shown in the following table.You need to implement an ExpressRoute circuit to access the resources in the subscription. The solution must ensure that the on-premises network connects to the Azure resources by using the ExpressRoute circuit.Which type of peering should you use for each connection? To answer, select the appropriate options in the answer area.NOTE: Each correct sel
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #15
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have two Azure virtual networks named Vnet1 and Vnet2.You have a Windows 10
A. es
B. o
عرض الإجابة
اجابة صحيحة: B
السؤال #16
Your company has four branch offices and an Azure subscription. The subscription contains an Azure VPN gateway named GW1.The branch offices are configured as shown in the following table.The branch office routers provide internet connectivity and Site-to-Site VPN connections to GW1.The users in Branch1 report that they can connect to internet resources, but cannot access Azure resources.You need to ensure that the Branch1 users can connect to the Azure resources. The solution must meet the following require
A. ecreate LNG1
B. eset RTR1
C. eset Connection1
D. eset GW1
عرض الإجابة
اجابة صحيحة: C
السؤال #17
DRAG DROP (Drag and Drop is not supported)You need to prepare Vnet1 for the deployment of an ExpressRoute gateway. The solution must meet the hybrid connectivity requirements and the business requirements. Which three actions should you perform in sequence for Vnet1? To answer, move the appropriate actions from the list of actions to the answer.Select and Place:
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #18
HOTSPOT (Drag and Drop is not supported)You have an Azure private DNS zone named contoso.com that is linked to the virtual networks shown in the following table.The links have auto registration enabled.You create the virtual machines shown in the following table.You manually add the following entry to the contoso.com zone:-Name: VM1 -IP address: 10.1.10.9For each of the following statements, select Yes of the statement is true. Otherwise, select No.NOTE: Each correct selection is worth one point. Hot Area:
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #19
You have an Azure subscription that contains the public IPv4 addresses shown in the following table.You plan to create a load balancer named LB1 that will have the following settings: -Name: LB1-Location: West US -Type: Public -SKU: StandardWhich public IPv4 addresses can be used by LB1?
A. P1, IP3, IP4, and IP5 only
B. P3 only
C. P1 and IP3 only
D. P2 only
E. P1, IP2, IP3, IP4, and IP5
عرض الإجابة
اجابة صحيحة: F
السؤال #20
HOTSPOT (Drag and Drop is not supported)Which virtual machines can VM1 and VM4 ping successfully? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.Hot Area:
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #21
You have an Azure virtual network named Vnet1 and an on-premises network. The on-premises network has policy-based VPN devices.In Vnet1, you deploy a virtual network gateway named GW1 that uses a SKU of VpnGw1 and is route-based.You have a Site-to-Site VPN connection for GW1 as shown in the following exhibit.You need to ensure that the on-premises network can connect to the route-based GW1.What should you do before you create the connection?
A. et Connection Mode to ResponderOnly
B. et BGP to Enabled
C. et Use Azure Private IP Address to Enabled
D. et IPsec / IKE policy to Custom
عرض الإجابة
اجابة صحيحة: D
السؤال #22
You are planning an Azure deployment that will contain three virtual networks in the East US Azure region as shown in the following table.A Site-to-Site VPN will connect Vnet1 to your company’s on-premises network.You need to recommend a solution that ensures that the virtual machines on all the virtual networks can communicate with the on-premises network. The solution must minimize costs.What should you recommend for Vnet2 and Vnet3?
A. Net-to-VNet VPN connections
B. eering
C. ervice endpoints
D. oute tables
عرض الإجابة
اجابة صحيحة: B
السؤال #23
HOTSPOT (Drag and Drop is not supported)You have an Azure subscription.You plan to use Azure Virtual WAN.You need to deploy a virtual WAN hub that meets the following requirements:•Supports 4 Gbps of Site-to-Site (S2S) VPN traffic•Supports 8 Gbps of ExpressRoute traffic•Minimizes costsHow many scale units should you configure? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #24
You are planning the IP addressing for the subnets in Azure virtual networks.Which type of resource requires IP addresses in the subnets?
A. torage account
B. nternal load balancers
C. ervice endpoints
D. ervice endpoint policies
عرض الإجابة
اجابة صحيحة: B
السؤال #25
You have an Azure application gateway named AGW1 that has a routing rule named Rule1. Rule 1 directs traffic for http://www.contoso.com to a backend pool named Pool1. Pool1 targets an Azure virtual machine scale set named VMSS1.You deploy another virtual machine scale set named VMSS2.You need to configure AGW1 to direct all traffic for http://www.adatum.com to VMSS2.The solution must ensure that requests to http://www.contoso.com continue to be directed to Pool1. Which three actions should you perform? Each
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: ADE
السؤال #26
You are planning the IP addressing for the subnets in Azure virtual networks.Which type of resource requires IP addresses in the subnets?
A. torage account
B. nternal load balancers
C. ervice endpoints
D. irtual network peering
عرض الإجابة
اجابة صحيحة: B
السؤال #27
HOTSPOT (Drag and Drop is not supported)You have an Azure virtual network named Vnet1 that contains two subnets named Subnet1 and Subnet2. You have the NAT gateway shown in the NATgateway1 exhibit.You have the virtual machine shown in the VM1 exhibit. Subnet1 is configured as shown in the Subnet1 exhibit.For each of the following statements, select Yes of the statement is true. Otherwise, select No.NOTE: Each correct selection is worth one point.Hot Area:
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #28
HOTSPOT (Drag and Drop is not supported)You have on-premises datacenters in New York and Seattle.You have an Azure subscription that contains the ExpressRoute circuits shown in the following table.You need to ensure that all the data sent between the datacenters is routed via the ExpressRoute circuits. The solution must minimize costs.How should you configure the network? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #29
HOTSPOT (Drag and Drop is not supported)You have an Azure subscription that contains a virtual network named Vnet1. Vnet1 has a /24 IPv4 address space.You need to subdivide Vnet1. The solution must maximize the number of usable subnets.What is the maximum number of IPv4 subnets you can create, and how many usable IP addresses will be available per subnet? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #30
SIMULATIONUsername and passwordUse the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Azure Username: User-12345678@cloudslice.onmicrosoft.comAzure Password: xxxxxxxxxxIf the Azure portal does not load successfully in the browser, press CTRL-K to reload theportal in a new browser tab.The following information is for technical
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #31
DRAG DROP (Drag and Drop is not supported)You have a DNS domain named contoso.com that is hosted by a third-party domain name registrar.You have an Azure subscription.You need to ensure that all DNS queries for the contoso.com domain are resolved by using Azure DNS.What should you create in the registrar, and what should you create in Azure? To answer, drag the appropriate options to the correct targets. Each option may be used once, more than once, or not at all. You may need to drag the split bar between
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #32
HOTSPOT (Drag and Drop is not supported)You have two Azure App Service instances that host the web apps shown the following table.You deploy an Azure 2 that has one public frontend IP address and two backend pools.You need to publish all the web apps to the application gateway. Requests must be routed based on the HTTP host headers.What is the minimum number of listeners and routing rules you should configure? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #33
You have the Azure environment shown in the exhibit.VM1 is a virtual machine that has an instance-level public IP address (ILPIP).Basic Load Balancer uses a public IP address. VM1 and VM2 are in the backend pool. NAT Gateway uses a public IP address named IP3 that is associated to SubnetA. VNet1 has a virtual network gateway that has a public IP address named IP4.When initiating outbound traffic to the internet from VM1, which public address is used?
A. P1
B. P2
C. P3
D. P4
عرض الإجابة
اجابة صحيحة: C
السؤال #34
You plan to implement an Azure virtual network that will contain 10 virtual subnets. The subnets will use IPv6 addresses. Each subnet will host up to 200 load-balanced virtual machines.You need to recommend which subnet mask size to use for the virtual subnets.What should you recommend?
A. 64
B. 120
C. 48
D. 24
عرض الإجابة
اجابة صحيحة: A
السؤال #35
SIMULATIONUsername and passwordUse the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Azure Username: User-12345678@cloudslice.onmicrosoft.comAzure Password: xxxxxxxxxxIf the Azure portal does not load successfully in the browser, press CTRL-K to reload theportal in a new browser tab.The following information is for technical
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #36
Your company has a single on-premises datacenter in Washington DC. The East US Azure region has a peering location in Washington DC.The company only has Azure resources in the East US region.You need to implement ExpressRoute to support up to 1 Gbps. You must use only ExpressRoute Unlimited data plans. The solution must minimize costs.Which type of ExpressRoute circuits should you create?
A. xpressRoute Local
B. xpressRoute Direct
C. xpressRoute Premium
D. xpressRoute Standard
عرض الإجابة
اجابة صحيحة: A
السؤال #37
HOTSPOT (Drag and Drop is not supported)You are implementing the virtual network requirements for Vnet6.What is the minimum number of subnets and service endpoints you should create? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #38
DRAG DROP (Drag and Drop is not supported)You need to implement outbound connectivity for VMScaleSet1. The solution must meet the virtual networking requirements and the business requirements.Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.Select and Place:
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #39
You have an Azure subscription that contains the virtual networks shown in the following table.You plan to deploy an Azure firewall named AF1 to RG1 in the West US Azure region.To which virtual networks can you deploy AF1?
A. net1 and Vnet4 only
B. net1, Vnet2, Vnet3, and Vnet4
C. net1 only
D. net1 and Vnet2 only
E. net1, Vnet2, and Vnet4 only
عرض الإجابة
اجابة صحيحة: C
السؤال #40
HOTSPOT (Drag and Drop is not supported)You have an Azure subscription that contains a virtual network named VNet1. VNet1 contains the resources shown in the following table.You need to publish App1 by using AG1 and a URL of https://app1.contoso.com. The solution must meet the following requirements:•TLS connections must terminate on AG1.•Minimize the number of targets in the backend pool of AG1.•Minimize the number of deployed copies of the SSL certificate of App1.How many locations should you import to th
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #41
HOTSPOT (Drag and Drop is not supported)You have an Azure subscription that contains the resource groups shown in the following table. You have the virtual networks shown in the following table. You have the subnets shown in the following table.For each of the following statements, select Yes if the statement is true. Otherwise, select No.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #42
HOTSPOT (Drag and Drop is not supported)You have an Azure virtual network named Vnet1 that contains two subnets named Subnet1 and Subnet2. Both subnets contain virtual machines.You create a NAT gateway named NATgateway1 as shown in the following exhibit.Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #43
SIMULATIONUsername and passwordUse the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Azure Username: User-12345678@cloudslice.onmicrosoft.comAzure Password: xxxxxxxxxxIf the Azure portal does not load successfully in the browser, press CTRL-K to reload theportal in a new browser tab.The following information is for technical
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #44
You need to configure the default route on Vnet2 and Vnet3. The solution must meet the virtual networking requirements. What should you use to configure the default route?
A. oute filters
B. GP route exchange
C. user-defined route assigned to GatewaySubnet in Vnet1
D. user-defined route assigned to GatewaySubnet in Vnet2 and Vnet3
عرض الإجابة
اجابة صحيحة: B
السؤال #45
SIMULATIONUsername and passwordUse the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Azure Username: User-12345678@cloudslice.onmicrosoft.comAzure Password: xxxxxxxxxxIf the Azure portal does not load successfully in the browser, press CTRL-K to reload theportal in a new browser tab.The following information is for technical
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #46
HOTSPOT (Drag and Drop is not supported)You need to recommend a configuration for the ExpressRoute connection from the Boston datacenter. The solution must meet the hybrid networking requirements and business requirements. What should you recommend? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.Hot Area:
A. KEv2 and OpenVPN (SSL)
B. KEv2
C. KEv2 and SSTP (SSL)
D. penVPN (SSL)
E. STP (SSL)
عرض الإجابة
اجابة صحيحة: A
السؤال #47
HOTSPOT (Drag and Drop is not supported)You need to connect an on-premises network and an Azure environment. The solution must use ExpressRoute and support failing over to a Site-to-Site VPN connection if there is an ExpressRoute failure.What should you configure? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.
A.
B.
C.
D.
E.
عرض الإجابة
اجابة صحيحة: A
السؤال #48
You have an Azure subscription that contains the resources shown in the following table.You create a virtual network named Vnet2 in the West US region.You plan to enable peering between Vnet1 and Vnet2.You need to ensure that the virtual machines connected to Vnet2 can connect to VM1 and VM2 via LB1.What should you do?
A. rom the Peerings settings of Vnet2, set Traffic forwarded from remote virtual network to Allow
B. hange the Floating IP configurations of LB1
C. rom the Peerings settings of Vnet1, set Traffic forwarded from remote virtual network to Allow
D. hange the SKU of LB1
عرض الإجابة
اجابة صحيحة: D
السؤال #49
Task 4You need to ensure that connections to the storage34280945 storage account can be made by using an IP address in the 10.1.1.0/24 range and the name storage34280945.pnvatelinlcblob.core.windows.net.
A. ee the Explanationbelow for step by step in structions
.
عرض الإجابة
اجابة صحيحة: A
السؤال #50
You need to configure the default route in Vnet2 and Vnet3. The solution must meet the virtual networking requirements.What should you use to configure the default route?
A. user-defined route assigned to GatewaySubnet in Vnet2 and Vnet3
B. user-defined route assigned to GatewaySubnet in Vnet1
C. GP route exchange
D. oute filters
عرض الإجابة
اجابة صحيحة: B
السؤال #51
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have an Azure application gateway that has Azure Web Application Firewall (W
A. es
B. o
عرض الإجابة
اجابة صحيحة: A
السؤال #52
Which virtual machines can VM1 and VM4 ping successfully before NSG10 and NSG11 are created? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #53
DRAG DROP (Drag and Drop is not supported)You register a DNS domain with a third-party registrar.You need to host the DNS zone on Azure.Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.Select and Place:
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #54
You are configuring two network virtual appliances (NVAs) in an Azure virtual network. The NVAs will be used to inspect all the traffic within the virtual network. You need to provide high availability for the NVAs. The solution must minimize administrative effort.What should you include in the solution?
A. zure Standard Load Balancer
B. zure Application Gateway
C. zure Traffic Manager
D. zure Front Door
عرض الإجابة
اجابة صحيحة: A
السؤال #55
You have an application named App1 that listens for incoming requests on a preconfigured group of 50 TCP ports and UDP ports.You install App1 on 10 Azure virtual machines.You need to implement load balancing for App1 across all the virtual machines. The solution must minimize the number of load balancing rules.What should you include in the solution?
A. zure Application Gateway V2 that has multiple listeners
B. zure Standard Load Balancer that has Floating IP enabled
C. zure Standard Load Balancer that has high availability (HA) ports enabled
D. zure Application Gateway v2 that has multiple site hosting enabled
عرض الإجابة
اجابة صحيحة: A
السؤال #56
Task 2You need to create an Azure Firewall instance named FW1 that meets the following requirements.* Has an IP address from the address range of 10.1.255.0/24* Uses a new Premium firewall policy named FW-pohcy1* Routes traffic directly to the internet
A. ee the Explanationbelow for step by step in structions
.
عرض الإجابة
اجابة صحيحة: A
السؤال #57
You need to connect Vnet2 and Vnet3. The solution must meet the virtual networking requirements and the business requirements.Which two actions should you include in the solution? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: AB
السؤال #58
HOTSPOT (Drag and Drop is not supported)You have an Azure virtual network and an on-premises datacenter that connect by using a Site-to-Site VPN tunnel.You need to ensure that all traffic from the virtual network to the internet is routed through the datacenter.How should you complete the PowerShell script to configure forced tunneling? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #59
HOTSPOT (Drag and Drop is not supported)You have an on-premises datacenter.You have an Azure subscription that contains 10 virtual machines and a virtual network named VNet1 in the East US Azure region. The virtual machines are connected to VNet1 and replicate across three availability zones.You need to connect the datacenter to VNet1 by using ExpressRoute. The solution must meet the following requirements:-Maintain connectivity to the virtual machines if two availability zones fail.-Support 1000-Mbps conne
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #60
HOTSPOT (Drag and Drop is not supported)You have an Azure subscription that contains a virtual network gateway named VNetGwy1. VNetGwy1 has a public IP address of 20.25.32.214.You need to query the health probe of VNetGwy1.How should you complete the URI? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #61
HOTSPOT (Drag and Drop is not supported)You have the Azure environment shown in the exhibit.You have virtual network peering between Vnet1 and Vnet2. You have virtual network peering between Vnet4 and Vnet5. The virtual network peering is configured as shown in the following table.For each of the following statements, select Yes if the statement is true. Otherwise, select No.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #62
You have the Azure virtual networks shown in the following table.You deploy Azure Firewall to Vnet3.You need to ensure that the traffic from Subnet1-1 to Subnet2-1 passes through the firewall.What should you configure?
A. eering links between Vnet1 and Vnet2
B. route table associated to Subnet1-1 and Subnet2-1
C. n Azure private DNS zone
D. route table associated to AzureFirewallSubnet
عرض الإجابة
اجابة صحيحة: B
السؤال #63
SIMULATIONUsername and passwordUse the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Azure Username: User-12345678@cloudslice.onmicrosoft.comAzure Password: xxxxxxxxxxIf the Azure portal does not load successfully in the browser, press CTRL-K to reload theportal in a new browser tab.The following information is for technical
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #64
SIMULATIONUsername and passwordUse the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Azure Username: User-12345678@cloudslice.onmicrosoft.comAzure Password: xxxxxxxxxxIf the Azure portal does not load successfully in the browser, press CTRL-K to reload theportal in a new browser tab.The following information is for technical
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #65
HOTSPOT (Drag and Drop is not supported)You have an Azure subscription that contains the resources shown in the following table.The virtual network topology is shown in the following exhibit.Firewall1 is configured as shown in following exhibit.FirewallPolicy1 contains the following rules:•Allow outbound traffic from Vnet1 and Vnet2 to the internet.•Allow any traffic between Vnet1 and Vnet2.No custom private endpoints, service endpoints, routing tables, or network security groups (NSGs) were created.For eac
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #66
You need to connect Vnet2 and Vnet3. The solution must meet the virtual networking requirements and the business requirements.Which two actions should you include in the solution? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: BE
السؤال #67
HOTSPOT (Drag and Drop is not supported)You have an Azure subscription that contain a storage account named st1 in the East US Azure region.You have the virtual networks shown in the following table.You have the subnets shown in the following table.For each of the following statements, select Yes if the statement is true. Otherwise, select No.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #68
HOTSPOT (Drag and Drop is not supported)You have the Azure App Service app shown in the App Service exhibit.The VNet Integration settings for as12 are configured as shown in the Vnet Integration exhibit.The Private Endpoint connections settings for as12 are configured as shown in the Private Endpoint connections exhibit.For each of the following statements, select Yes if the statement is true. Otherwise, select No.NOTE: Each correct selection is worth one point.
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #69
HOTSPOT (Drag and Drop is not supported)You are planning an Azure solution that will contain the following types of resources in a single Azure region:-Virtual machine -Azure App Service-Virtual Network gateway -Azure SQL Managed InstanceApp Service and SQL Managed Instance will be delegated to create resources in virtual networks.You need to identify how many virtual networks and subnets are required for the solution. The solution must minimize costs to transfer data between virtual networks. What should y
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #70
Your company has an office in New York.The company has an Azure subscription that contains the virtual networks shown in the following table.You need to connect the virtual networks to the office by using ExpressRoute. The solution must meet the following requirements:-The connection must have up to 1 Gbps of bandwidth.-The office must have access to all the virtual networks.-Costs must be minimized.How many ExpressRoute circuits should be provisioned, and which ExpressRoute SKU should you enable?
A. ne ExpressRoute Premium circuit
B. wo ExpressRoute Premium circuits
C. our ExpressRoute Standard circuits
D. ne ExpressRoute Standard circuit
عرض الإجابة
اجابة صحيحة: A
السؤال #71
HOTSPOT (Drag and Drop is not supported)You have two Azure virtual networks named VNet1 and VNet2 in an Azure region that has three availability zones.You deploy 12 virtual machines to each virtual network, deploying four virtual machines per zone. The virtual machines in VNet1 host an app named App1. The virtual machines in VNet2 host an app named App2.You plan to use Azure Virtual Network NAT to implement outbound connectivity for App1 and App2.You need to identify the minimum number of subnets and Virtua
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #72
You have five virtual machines that run Windows Server. Each virtual machine hosts a different web app.You plan to use an Azure application gateway to provide access to each web app by using a hostname of www.contoso.com and a different URL path for each web app, for example: https://www.contoso.com/app1. You need to control the flow of traffic based on the URL path.What should you configure?
A. TTP settings
B. isteners
C. ules
D. ewrites
عرض الإجابة
اجابة صحيحة: C
السؤال #73
You need to configure GW1 to meet the network security requirements for the P2S VPN users.Which Tunnel type should you select in the Point-to-site configuration settings of GW1?
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: D

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.