An 8-Node vSAN Stretched Cluster (4+4+1) with a single disk group has a policy with PFTT=1(mirrored across sites) and SFTT=1/FTM Mirroring (Local Protection) configured.The administrator has been alerted that there is a problem with the cluster. The following has beenobserved:* The vSAN Witness Host is offline.* Two disk failures on two hosts have occurred in the preferred site.This has resulted in a critical production virtual machines vmdk becoming inaccessible.Which step needs to be performed by the admi

An administrator has an absent capacity disk.Which action, if any, should the administrator take to resolve the problem?

An architect intends to use the Primary Level of Failures To Tolerate (PFTT) to calculate the minimum number of required hosts for a vSAN cluster. Which calculation model should be used? https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vsan-planning.doc/GUID-57575456-0AD9-4655-9D6B-58509C1DF33C.html

During a design workshop for a stretched vSAN cluster, the requirement that some of the VMs beconfigured with no-mirror between sites was discussed.Which three recommendations should the architect provide to address an event of a networkpartition between two sites? (Choose three.)

An administrator is setting up vSAN file services on a vSAN cluster but is unable to join the vSAN File Services to the domain. Which two possible reasons could explain this failure? (Choose two.) https://docs.vmware.com/en/VMware-vSphere/8.0/vsan-administration/GUID-CA9CF043-9434-454E-86E7-DCA9AD9B0C09.html

A 4-node vSAN cluster is configured with an erasure coding storage policy. The Ensure Accessibilitymaintenance mode was selected. While performing the maintenance, a second node fails.What will be the impact on the vSAN cluster?

An administrator is tasked to create a custom storage policy for workloads and is including additionaldisk stripes while defining the storage policy.What is the main purpose of this practice?

A company has engaged a consultant to upgrade an existing vSAN cluster to vSAN 7.0 U1.During the discovery phase, the consultant found the following information about the existingenvironment:* The VMware vCenter Server has recently been upgraded from VMware vSphere 6.7 U3 to version7.0 U1.* The vSAN Cluster was recently expanded with identical hardware specification, but from a differenthardware vendor.* The hardware for each vSAN node is listed on the vSAN Compatibility Guide (VCG) for vSAN 7.* The vSAN Cl

An architect is tasked to design a VMware Horizon Solution with vSAN. The architect needs to use asolution to host the users profile shares in a highly available manner, and it must be guest OSindependent.Which solution will match these requirements?

As a part of a network hardware refresh project, all the network switches have been replaced with a newer, high-performance model. After the replacement, the company users started experiencing slowness on the applications hosted on their vSAN-backed VMs. The vSAN administrator checked the vSAN Network Health status and noticed that the "Hosts large ping test" has failed. What could be the cause of this performance degradation issue? https://kb.vmware.com/s/article/2108285

An administrator managing a vSAN cluster of six-nodes with policy FTT-2/RAID-6 decided to put oneof the nodes in maintenance mode using the Full-data migration option.What will happen after this action is taken?

cluster for a customer who is planning to use vRealize Automation to provision 600 virtual machines into that cluster, with expected growth up to 1,000 VM. Each VM has a 40GB thick-provisioned disk. Which flash disk size is required for the cache tier per ESXi node to meet all requirements? https://kb.vmware.com/s/article/89485

multiple data centers, the customer relayed the following information:* Highest possible mitigation during a host failure in terms of capacity.* A constraint in this years IT budget.What should the architect recommend?A.Enable operations reserve.A minimum cluster of 3 vSAN nodes.B.Enable host build reserve.A minimum cluster of 4 vSAN nodes.C.Enable performance services.A minimum cluster of 6 vSAN nodes.D.Enable IOInsight Metrics.A minimum cluster of 2 vSAN ROBO nodes.

An architect collected the below technical requirements from the customer during a vSAN clusterdesign workshop:* Maximize the vSAN datastore usable capacity.* Deduplication and compression are required to help utilize available capacity efficiency.* Ensure the highest level of resiliency wherever possible.Which disk group configuration should the architect include in the design?

A customer is planning to migrate their physical Microsoft SQL Server clustered workloads to vSANenabled vSphere clusters.The following requirements must be met:* Each MSSQL cluster is made up of 3 nodes* Highest possible availability against node failures* Some of the vSAN clusters will only consume storageWhat should the architect recommend?

An architect is working with vSAN and setting the fault domains to support FTT=1.How many fault domains will be needed?

An architect is working with an All-Flash vSAN configuration and will be using the Flash CachingDevices in vSAN.Which requirement is specifically needed for these devices?

A company has engaged a consultant to upgrade an existing vSAN cluster to vSAN 7.0 U1. Thecompany wants to ensure that the same vSAN process can be used in the future.During the discovery phase, the consultant found the following information about the existingenvironment:* The vCenter Server is currently version 7.0.* The vSAN Cluster has the following configuration:- vSAN version: 7.0- Number of vSAN nodes: 6- Encryption: enabled- Deduplication and Compression: enabled- Fault Domains: 1- vSAN Capacity Util

An administrator wants to deploy Kubernetes on an end-to-end VMware stack, using VMware vSAN for storage. Which VMware product should the administrator install as the Kubernetes platform choice? https://docs.vmware.com/en/VMware-Tanzu-Kubernetes-Grid-Integrated-Edition/index.html There is a picture with integration with vSAN

An administrator is tasked with migrating a VMware Horizon View environment that is currentlyrunning on an NFS Datastore to VMware vSAN.Which Horizon configuration option will not be available when configuring vSAN in Horizon View?