لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
An upgrade of protected RPMs from the Bash shell did not take effect. Which action is required for the changes to take effect?
A. Restart the Bash shell
B. Reload the switch
C. Upgrade the RPMs from the Guest shell
D. Disable and reenable the Bash feature
عرض الإجابة
اجابة صحيحة: D
السؤال #2
One of Cisco Nexus Series interfaces has become errdisabled with the error message “DCX-No ACK in 100 PDUs”. What is the cause of this error?
A. The host has not responded to the Control Sub-TLV DCBX exchanges of the switch
B. The acknowledgement number in the server response has not incremented for 100 exchanges
C. Cisco Discovery Protocol is disabled on the switch
D. LLDP is disabled on the switch
عرض الإجابة
اجابة صحيحة: B
السؤال #3
vPC between switch1 and switch2 is not working. Which two actions are needed to fix the problem? (Choose two.)
A. Match vPC domain ID between the two devices
B. Configure IP address on the interface
C. Activate VLANs on the vPC
D. Configure vPC peer link and vPC peer keepalive correctly
E. Configure one of the switches as primary for the vPC
عرض الإجابة
اجابة صحيحة: AC
السؤال #4
An engineer is troubleshooting why user1, user2, and user3 from group STORAGE-ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
A. Configure the role name to match the group name on Microsoft Active Directory
B. Include specific users into MDS role configuration
C. Configure SSH logins on Cisco MDS switch
D. Integrate Cisco MDS with Microsoft Active Directory
عرض الإجابة
اجابة صحيحة: A
السؤال #5
The HSRP instance on both switches is showing as active. Which action resolves the issue?
A. Configure the HSRP timers to be the same
B. Allow VLAN 100 between the switches
C. Configure the IP address of N9K-B on the same subnet as N9K-A
D. Configure preempt on only one of the switches
عرض الإجابة
اجابة صحيحة: B
السؤال #6
A server fails to boot from the operating system after a RAID1 cluster migration. The RAID remains in an inactive state during and after a service profile association. Which action resolves the issue?
A. Configure the SAN boot target in the service profile
B. Configure the SAN boot target to any configuration mode
C. Use a predefined local disk configuration policy
D. Remove the local disk configuration policy
عرض الإجابة
اجابة صحيحة: C
السؤال #7
An engineer removes a VMM domain from an endpoint group called EPG-1, but the distributed port group fails to be deleted. Which action must be taken to resolve the issue?
A. Remove the port group manually
B. Migrate all virtual machines in the EPG-1 to different hypervisors
C. Remove the remaining EPGs from the VMM domain
D. Migrate all virtual machines in the EPG-1 to different port groups
عرض الإجابة
اجابة صحيحة: C
السؤال #8
A new Cisco Nexus 5548 Switch connects to a network. SAN switching is configured on the switch. The switch fc2/10 NP uplink is shown in the exhibit. Which action ensures that fc2/10 is in an up state?
A. Replace the SFP port module in fc2/10
B. Configure the admin port type E on the upstream switch that connects the port
C. Enable NPIV on the upstream switch that connects the port
D. Configure the BB_credit buffers on the upstream switch that connects the port
عرض الإجابة
اجابة صحيحة: C
السؤال #9
Interface fc1/5 is offline. Which action should be taken to troubleshoot the issue?
A. Activate the correct zoneset for VSAN 100
B. Update the FLOGI database to contain the FLOGI entries for interface fc1/5 in VSAN 100
C. Update the FCNs database to contain names for VSAN 100
D. Configure the upstream ports and the server ports to be in VSAN 100
عرض الإجابة
اجابة صحيحة: D
السؤال #10
An attempt to use a global vNIC redundancy template pair results in a service profile that fails to apply. Which action resolves the issues?
A. Create the peer names before creating the templates
B. Assign the secondary template first, and then set the peer name
C. Assign both templates simultaneously
D. Assign the primary template first, and then set the peer name
عرض الإجابة
اجابة صحيحة: D

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.