What is correct regarding policy-based routing?

An administrator is concerned about the security of the control plane connection between an AOS-CX switch and an Aruba Mobility Controller (MC) when implementing user-based tunneling. How should the administrator protect this traffic?

Examine the network topology. The network is configured for OSPF with the following attributes: Core1 and Core2 and ABRs Area 1 has 20 networks in the 10.1.0.0/16 range Area 0 has 10 networks in the 10.0.0.0/16 range Area 2 has 50 networks in the 10.2.0.0/16 range The ASBR is importing a static route into Area 1 Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1: Based on the above information, what is correct?

An administrator is implementing a multicast solution in a multi-VLAN network. Which statement is true about the configuration of the switches in the network?

An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone’s LAN port is connected to the switch. Which statement is correct about this situation?

What is correct regarding the configuration of ACLs on AOS-CX switches?

When implementing user-based tunneling on an AOS-CX switch, which component defines the primary and backup Aruba gateways?

A network engineer for a company with 896 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?

Which AOS-CX feature is used to prevent head-on-line (HOL) blocking?

Examine the VSX-related configuration of the core layer AOS-CX switch: A network administrator is troubleshooting a connectivity issue involving the VSX LAG (link aggregation) between the core and access layer switch, during HW replacement of one of the core switches. Which configuration should the administrator add to the core switch to fix this issue?

What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?

An administrator has an AOS-CX switch configured with: router ospf 1 area 0 area 1 stub no-summary It is the only ABR for area 1. The switch has the appropriate adjacencies to routing switches in areas 0 and 1. The current routes in each area are: Area 0: 5 routes (LSA Type 1 and 2) Area 1: 10 routes (LSA Type 1 and 2) External routes: 2 (LSA Type 5) Based on the above configuration, how many OSPF routes will routing switches see in Area 1?