السؤال #1

A vSAN administrator has a group of requirements from the application team, which mandates spreading the components across storage devices as much as possible. What should the vSAN Administrator consider to achieve such a requirement for building a new vSAN cluster? (Choose two.)

A. Configure disk striping in OSA

B. Configure disk striping in ESA

C. Enable Force Provisioning in OSA

D. Enable deduplication for vSAN

E. Create a dedicated Storage Pool in ESA

عرض الإجابة

اجابة صحيحة: AB

السؤال #2

During yesterday?€?s business hours, a cache drive failed on one of the vSAN nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive. Which set of steps should the vSAN administrator take?

A. Remove the existing vSAN disk group, and physically replace the device

B. Physically replace the failed cache device, and vSAN will automatically create a new disk group

C. Physically replace the failed cache device, and vSAN will automatically allocate the storage

D. Place the disk group into maintenance mode, and select Full Data Migration

عرض الإجابة

اجابة صحيحة: B

السؤال #3

An administrator is tasked with configuring vSAN Cloud Native Storage. Which two requirements must be met for a successful configuration? (Choose two.)

A. vSAN iSCSI service enabled

B. Minimum of vSphere 6

C. Tanzu Enterprise License required

D. Minimum of vSphere 7

E. Compatible version of Kubernetes

عرض الإجابة

اجابة صحيحة: BE

السؤال #4

What is the maximum amount of capacity disks an administrator can have in disk groups on a single vSAN OSA host?

A. 35

B. 40

C. 30

D. 25

عرض الإجابة

اجابة صحيحة: A

السؤال #5

An all-flash vSAN ESA cluster contains four nodes. Which two storage policies can the cluster satisfy? (Choose two.)

A. FTT=3 (RAID-1 Mirroring)

B. FTT=2 (RAID-1 Mirroring)

C. FTT=l (RAID-5 Erasure Coding)

D. FTT=l (RAID-1 Mirroring)

E. FTT=2 (RAID-6 Erasure Coding)

عرض الإجابة

اجابة صحيحة: CD

السؤال #6

When attempting to add a directly attached disk device to a host disk group, the intended disk does not show among the available devices in disk management. Which action should be taken?

A. Delete all device partitions

B. Create a 1GB metadata partition

C. Format the existing partition

D. Create a VMFS partition

عرض الإجابة

اجابة صحيحة: A

السؤال #7

Which two actions are recommended when adding a host to a vSAN cluster? (Choose two.)

A. Disable vSphere High Availability (HA)

B. Create uniformly-configured hosts

C. Reference the VMware Compatibility Guide

D. Disable vSphere Cluster Services (vCLS)

E. Disable vSAN performance service

عرض الإجابة

اجابة صحيحة: BC

السؤال #8

A site administrator wishes to implement HCI mesh between two clusters on vSAN that are located in geographically separate sites and which are administered within a single datacenter. Which two requirements should the vSAN administrator consider to accomplish this goal? (Choose two.)

A. Either Layer 2 or Layer 3 communications can be used

B. A leaf spine topology is required for core redundancy and reduced latency

C. NIC teaming must be implemented for the vSAN network vmkernel port

D. The configuration must meet the same latency and bandwidth requirement as local vSAN

E. Encryption must be disabled prior to configuring HCI mesh

عرض الإجابة

اجابة صحيحة: AD

السؤال #9

When attempting to add a directly attached disk device to a host disk group, the intended disk does not show among the available devices in disk management. Which action should be taken?

A. Delete all device partitions

B. Create a 1GB metadata partition

C. Format the existing partition

D. Create a VMFS partition

عرض الإجابة

اجابة صحيحة: A

السؤال #10

A site administrator wishes to implement HCI mesh between two clusters on vSAN that are located in geographically separate sites and which are administered within a single datacenter. Which two requirements should the vSAN administrator consider to accomplish this goal? (Choose two.)

A. Either Layer 2 or Layer 3 communications can be used

B. A leaf spine topology is required for core redundancy and reduced latency

C. NIC teaming must be implemented for the vSAN network vmkernel port

D. The configuration must meet the same latency and bandwidth requirement as local vSAN

E. Encryption must be disabled prior to configuring HCI mesh

عرض الإجابة

اجابة صحيحة: AD

السؤال #11

An administrator is tasked to create a Kerberos secured NFS v4.1 file share. Which information is minimally required during the configuration of the File Service?

A. Organizational Unit, User Account, Password

B. Active Directory Domain, User Account, Password

C. Kerberos Server, User Account, Password

D. Active Directory Domain, Organizational Unit, User Account, Password

عرض الإجابة

اجابة صحيحة: B

السؤال #12

What is the purpose of host rebuild reserve in vSAN?

A. Reserves space in case of single host failure

B. Allocated capacity for vCLS

C. Reconfigures data components

D. Stores vSphere HA heartbeats

عرض الإجابة

اجابة صحيحة: A

السؤال #13

An administrator wants to assign a storage policy to a workload on a two-node vSAN OSA cluster consisting of three disk groups each with nested fault domains. The virtual machine must be protected against a disk or disk group failure. Which two storage policies meet these requirements? (Choose two.)

A. RAID-5/FTT 2

B. RAID-1/FTT 3

C. RAID-6/FTT 2

D. RAID-5/FTT 1

E. RAID-1/FTT 1

عرض الإجابة

اجابة صحيحة: DE

السؤال #14

What are two purposes of a vSAN storage policy? (Choose two.)

A. To determine vSAN encryption level

B. To enable TRIM/UNMAP

C. To define how the VM storage objects are provisioned

D. To guarantee the required level of service

E. To enable deduplication and compression

عرض الإجابة

اجابة صحيحة: CD

السؤال #15

A vSAN administrator is investigating vSAN performance related problems but cannot find any vSAN performance statistics on the cluster summary page. Why is this situation occurring?

A. The vRealize Operations Manager is not integrated with vSAN cluster

B. The administrator has read-only permissions on the cluster level

C. vSAN performance statistics are only available via CLI

D. vSAN performance service is not enabled

عرض الإجابة

اجابة صحيحة: D

السؤال #16

A vSAN administrator is noticing that the objects resynchronizing in the cluster are taking longer than expected and wants to view the resynchronizing metrics. Which performance category should the vSAN administrator open?

A. Disks

B. Host Network

C. Resync Latency

D. Backend

عرض الإجابة

اجابة صحيحة: D

السؤال #17

A vSAN administrator, who has a cluster that has both compute-only and vSAN ReadyNodes, recently received a request to deploy a new application with higher storage performance requirements than what are currently available. What are two ways the administrator can reconfigure the vSAN cluster to obtain this additional performance? (Choose two.)

A. Add additional hosts, with capacity devices only, and then stream the cache from the other hosts

B. Add cache and capacity devices to the compute-only hosts

C. Add additional cache and capacity devices to the existing data nodes

D. Add additional compute-only hosts from the vSAN cluster

E. Add to the existing disk groups two cache devices and the eight capacity devices

عرض الإجابة

اجابة صحيحة: BC

السؤال #18

The Resyncing Objects view in the vCenter UI reports that some objects are currently resyncing. Which two actions would cause this situation? (Choose two.)

A. DRS is relocating VMs between vSAN nodes

B. HA Virtual Machine Monitoring forced a VM to reboot

C. A host failure occurs in the cluster

D. A change to the storage policy is applied to the objects

E. A VM snapshot is being deleted

عرض الإجابة

اجابة صحيحة: CD

السؤال #19

The objects on a 4-node vSAN cluster are assigned a RAID-5 policy. A network outage occurs, causing host one to lose connectivity with the rest of the cluster. Seventy-five minutes have elapsed. What is the health state of the objects?

A. Reduced availability with no rebuild

B. Non-availability related incompliance (non-compliancE

C. Reduced availability

D. Reduced availability with no rebuild – delay timer

عرض الإجابة

اجابة صحيحة: A

السؤال #20

Which two prerequisites are required before a vSAN administrator is able to use the vSAN Performance Diagnostics feature? (Choose two.)

A. The vSAN Performance Service must be enabled

B. The vSAN Health Service must be turned on

C. vSAN File Services must be disabled before running vSAN Performance Diagnostics

D. Participation in the Customer Experience Improvement Program (CEIP) must be enabled

E. Verbose Mode must be enabled when configuring vSAN monitoring

عرض الإجابة

اجابة صحيحة: AB

السؤال #21

An administrator has discovered that space utilized by VMs does not decrease after deleting files and folders within the VMs. The administrator needs to be able to reclaim this space. Which action could the administrator take to accomplish this task?

A. Disable Storage I/O Control for the vSAN cluster

B. Reboot the VM to recreate the swap file

C. Set the Object Space Reservation rule to 100%

D. Enable TRIM/UNMAP for the vSAN cluster

عرض الإجابة

اجابة صحيحة: D

السؤال #22

A vSAN administrator is using the vSAN ReadyNode Sizer to build a new environment. While entering the cluster configurations, a fellow colleagues inquire about the Operations Reserve option. What is the purpose of using this option?

A. Configures space for external operations

B. Provides space for internal operations

C. Reserves space for tolerating failures

D. Allocates space for vSAN upgrades

عرض الإجابة

اجابة صحيحة: B

السؤال #23

Which two characteristics are associated with vSAN Data-In-Transit Encryption? (Choose two.)

A. Uses AES-256 bit encryption

B. Requires an external KMS in order to work

C. Needs specific configuration on the Network switches in order to be enabled

D. Can be enabled independently of the vSAN Data-At-Rest encryption

E. Needs to be enabled using vSAN Storage Policies

عرض الإجابة

اجابة صحيحة: AD

السؤال #24

An administrator has discovered that space utilized by VMs does not decrease after deleting files and folders within the VMs. The administrator needs to be able to reclaim this space. Which action could the administrator take to accomplish this task?

A. Disable Storage I/O Control for the vSAN cluster

B. Reboot the VM to recreate the swap file

C. Set the Object Space Reservation rule to 100%

D. Enable TRIM/UNMAP for the vSAN cluster

عرض الإجابة

اجابة صحيحة: D

السؤال #25

An administrator has 24 physical servers that need to be configured with vSAN. The administrator needs to ensure that a single rack failure is not going to affect the data availability. The number of racks used should be minimized. What has to be done and configured to achieve this goal?

A. Distribute servers across at least two different racks and configure two fault domains

B. Configure disk groups with a minimum of four capacity disks in each server and distribute them across four racks

C. Enable deduplication and compression

D. Distribute servers across at least three different racks and configure three fault domains

عرض الإجابة

اجابة صحيحة: D

السؤال #26

An administrator must choose between deploying a virtual witness or physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness. What is a benefit of selecting this approach?

A. Reduced vSphere licensing

B. Additional compute capacity for running VMs

C. Shared metadata between separate clusters

D. Increased vSAN datastore capacity

عرض الإجابة

اجابة صحيحة: A

السؤال #27

Which two conditions should be verified before removing an ESXi host from a vSAN cluster? (Choose two.)

A. Resyncs are running

B. Data evacuation is complete

C. Performance Service is disabled

D. Encryption is disabled

E. ESXi host is in maintenance mode

عرض الإجابة

اجابة صحيحة: BE

السؤال #28

A vSAN administrator is troubleshooting poor performance of vSAN cluster while vCenter is not available. The vSAN administrator decides to use a command line tool to monitor real-time vSAN IOPS, throughput, and other metrics on ESXi host. Which command line tool should be used?

A. vimtop

B. esxcli

C. esxcfg

D. vsantop

عرض الإجابة

اجابة صحيحة: D

السؤال #29

An administrator is tasked with configuring vSAN Cloud Native Storage. Which two requirements must be met for a successful configuration? (Choose two.)

A. vSAN iSCSI service enabled

B. Minimum of vSphere 6

C. Tanzu Enterprise License required

D. Minimum of vSphere 7

E. Compatible version of Kubernetes

عرض الإجابة

اجابة صحيحة: BE

السؤال #30

When attempting to add a directly attached disk device to a host disk group, the intended disk does not show among the available devices in disk management. Which action should be taken?

A. Create a 1GB metadata partition

B. Format the existing partition

C. Create a VMFS partition

D. Delete all device partitions

عرض الإجابة

اجابة صحيحة: D

لا تريد أن تفوت شيئا؟

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع!
احصل الان

View The Updated Vmware Exam Questions

عرض الإجابات بعد التقديم

لا تريد أن تفوت شيئا؟

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع! احصل الان

View The Updated Vmware Exam Questions

عرض الإجابات بعد التقديم

اجتياز اختبار الممارسة Cisco وPMP وCISA وCISM وAWS بنسبة 100% للبيع!
احصل الان