In the Analyze phase, one of the things you do is:

A Belt working in a supply chain environment has to make a decision to change suppliers of critical raw materials for a new product upgrade. The purchasing manager is depending on the Belt’s effort requiring that the average cost of an internal critical raw material component be less than or equal to $3,800 in order to stay within budget. Using a sample of 38 first article components, a Mean of the new product upgrade price of $3,680, and a Standard Deviation of $120 was estimated. In order to increase the

Since Normality is required if we intend to use the data collected as a predictive tool. To test for Normality of data we must determine if the P-value is__________________.

Some of the sources for different types of error that can be quantified using Statistical Analysis are_____________________.

Which statement(s) are correct about the Pareto Chart shown here for the DOE analysis? (Note: There are 2 correct answers).

If a process has subgroups for Variable data and the process runs for a long period of time, then the best pair of SPC Charts to use would be an Xbar and_______________.

The reported Cpk for a process with an average of 104 units, a spread of 18 units and upper and lower specification limits of 122 and 96 units would be?

Which Experimental Design typically is most associated with the fewest number of input variables or factors in the design?

With Measurement System Analysis we are concerned with two issues that impact the potential variability of the data. They are________________ and Accuracy.

As a means of measuring the effects on other areas of a process as a result of changes in the primary metric we also define and track_________________.

Two of the key deliverables for the Measure Phase are a robust description of the process and its flow and an assessment of the Management System.

Which of these graphs demonstrates conditions which would be sufficient to enable OCAP for the process?

How do we summarize discrete data?

Which statement(s) are incorrect about Fractional Factorial Designs?

Using this partial Z Table, how many units from a month’s production run are expected to not satisfy customer requirements for the following process?Upper specification limit: 8.4 Lower specification limit: 4.7 Mean of the process: 6.2 Standard Deviation: 2.2 Monthly production: 360 units

The validity of the decision made with Hypothesis Testing is dependent upon all of these except________________.

Assessing process proportion as opposed to evaluating a process with respect to a set target can be done using which of these?

Kaizens or Kaikakus and Six Sigma projects are intended to create incremental process improvements versus breakthrough, significant improvements.

When a Belt implements an improvement that is automated thus requiring no particular understanding for use he has applied which Lean tool?

Which statement(s) are most correct for the Regression Analysis shown here?

Which of these items contribute to what is necessary for successful Kaizen events?