لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
An engineer must design a multitenant solution using Cisco 7709 switches. The solution must support separate routing instances, separate spanning tree domains, and separate firewalls for each tenant.Which solution meets these requirements?
A. PC
B. DC
C. FS
D. RF
عرض الإجابة
اجابة صحيحة: B
السؤال #2
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
A. P redirects
B. low control
C. roxy ARP
D. SRP
عرض الإجابة
اجابة صحيحة: C
السؤال #3
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
A. un the disable fips-mode command on each fabric interconnect
B. un the connect local-management command on each fabric interconnect
C. rase the configuration of both fabric interconnects
D. nplug the Layer 1 and Layer 2 interfaces between the devices
عرض الإجابة
اجابة صحيحة: D
السؤال #4
An engineer is operating data center environment that hosts data-intensive financial applications. The applications are mostly processing HTTP/HTTPS data with large data segments, which results in a CPU contention due to the significant network processing.Which set of the Ethernet adapter policies must be selected to resolve the issue?
A. eceive Checksum Offload field set to DisabledTCP Segmentation Offload field set to DisabledTransmit Queues field: 32Ring Size field: 256
B. eceive Checksum Offload field set to EnabledTCP Segmentation Offload field set to DisabledTransmit Queues field: 64Ring Size field: 128
C. eceive Checksum Offload field set to EnabledTCP Segmentation Offload field set to EnabledTransmit Queues field: 128Ring Size field: 64
D. eceive Checksum Offload field set to DisabledTCP Segmentation Offload field set to EnabledTransmit Queues field: 256Ring Size field: 128
عرض الإجابة
اجابة صحيحة: B
السؤال #5
What is an advantage of using OTV as compared to VPLS for data center redundancy?
A. revents loops on point-to-point links
B. rovides head-end replication
C. ses a proactive MAC advertisement
D. rovides full-mesh connectivity
عرض الإجابة
اجابة صحيحة: A
السؤال #6
An engineer enables the HSRP feature on a Cisco Nexus 7000 Series Switch. It must be ensured that the switch manages packets that are sent to the local vPC MAC address, remote vPC MAC address, and HSRP virtual MAC address.Which command accomplishes this goal?
A. eer-switch
B. eer-gateway
C. ap-server
D. srp preempt
عرض الإجابة
اجابة صحيحة: D
السؤال #7
An engineer must use OTV for Layer 2 connectivity between data centers to support virtual machine mobility between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team reports high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a local DC exit point.Which feature must be used to meet these requirements?
A. ata group
B. HRP filter
C. RP filter
D. ontrol group
عرض الإجابة
اجابة صحيحة: D
السؤال #8
A network engineer must select a high availability feature for their data center. The solution must ensure network resilience, reduce network instability for Layer 3 routing protocols, and meet these requirements: The device must notify its neighbors when the control plane is undergoing a restart.The solution must suppress routing flaps in case of stateful switchovers. Which solution must be implemented?
A. FD
B. SRP
C. SF
D. SSU
عرض الإجابة
اجابة صحيحة: C
السؤال #9
A data center uses Cisco Nexus 7000 Series Switch and contains two tenants, tenant A and tenant B. Tenant A uses IP addresses in the 10.2.30.41/24 to 10.2.30.64/24 range.Tenant B uses IP addresses in the 10.2.30.120/24 to 10.2.30.192/24 range. The engineer must implement a solution that Isolates the traffic for each tenant as separate routing data and control planes.Physically partitions the Cisco Nexus device into separate multiple logical devices with separate management, failure domain isolation, and res
A. PC
B. irtual interface
C. ort channel
D. hysical port
عرض الإجابة
اجابة صحيحة: AE
السؤال #10
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?
A. yperFlex Edge support
B. ncryption offload cards
C. edicated compute nodes
D. abric interconnects
عرض الإجابة
اجابة صحيحة: B
السؤال #11
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: AE
السؤال #12
Which element is the main functional component of the architecture that separates the internal fabric and the external network that connects sites when VXLAN EVPN is deployed multisite?
A. PC+
B. DLD
C. VPN
D. SPF
عرض الإجابة
اجابة صحيحة: C
السؤال #13
An engineer is experiencing performance issues on a Cisco UCS blade server. The B-Series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic.Which policy must be used to alleviate these issues?
A. AN connectivity
B. ynamic vNIC connection
C. thernet adapter
D. NIC placement
عرض الإجابة
اجابة صحيحة: B
السؤال #14
Refer to the exhibit.What must be the default gateway of the servers in EPG Web?
A. order leaf
B. ervice leaf
C. order gateway
D. ervice gateway
عرض الإجابة
اجابة صحيحة: D
السؤال #15
A network engineer must design a data center network with four Cisco Nexus 7706 switches. The switches will be installed in primary and secondary data centers in vPC domains. The two data centers must be connected via Layer 2 links and provide the maximum throughput, redundancy, and avoid port-blocking spanning-tree design.Which deployment model meets these requirements?
A. ual-sided single vPC
B. ingle-sided dual vPC
C. ual-sided dual vPC
D. ingle-sided single vPC
عرض الإجابة
اجابة صحيحة: C
السؤال #16
A cloud service provider provisioned four active/active data centers in various locations within the country at 50 miles between each data center. The data centers must provide redundant network infrastructure and always be available to customers.Which two data center design steps must be used to meet these requirements? (Choose two.)
A. GP
B. SPF
C. SIS
D. XLAN
عرض الإجابة
اجابة صحيحة: AE
السؤال #17
Which technology enables Layer 2 extension between remote data center sites?
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: D
السؤال #18
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
A. pdate the applied global QoS policy
B. pdate the applied Fibre Channel adapter policy
C. nable Persistent Binding in the vHBA policy
D. nclude a SAN pin group in the vHBA policy
عرض الإجابة
اجابة صحيحة: D
السؤال #19
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?
A. ll the VDC have the same out-of-band IP address
B. ach VDC has a dedicated out-of-band Ethernet management port
C. ach VDC has a unique out-of-band IP address from the same IP subnet
D. ach VDC has a unique out-of-band IP address from different IP subnets among VDCs
عرض الإجابة
اجابة صحيحة: C
السؤال #20
An engineer must secure the payload traversing across the DCI. The solution must support confidentiality and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used.Which technology must be used to support these requirements?
A. RE
B. TV
C. ACsec
D. Psec
عرض الإجابة
اجابة صحيحة: C
السؤال #21
A company runs mission-critical infrastructure in a single data center. Due to business growth, it plans to open more data centers in the coming years. A network engineer is asked to recommend a network technology for data center interconnection that allows scalability and seamless VM mobility while providing maximum security and fault isolation between data centers.Which technology must be used to meet these requirements?
A. rustSec
B. TV
C. loudSec
D. DLD
عرض الإجابة
اجابة صحيحة: B
السؤال #22
Refer to the exhibit.An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
A. -Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding
B. -Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding
C. -Gbps links and 10-Gbps links use 8B/10B encoding
D. -Gbps links and 10-Gbps links use 64B/66B encoding
عرض الإجابة
اجابة صحيحة: BD
السؤال #23
An engineer is implementing a Cisco UCS environment The requirements for the solution are for the MAC addresses to be learned only on the server-facing ports. The use of the Spanning Tree Protocol must be avoided. Also, the engineer must have deterministic traffic handling from blades to uplink ports.Which two settings must be selected to meet these requirements? (Choose two.)
A. anagement port
B. onsole port
C. onnectivity management port
D. thernet port
عرض الإجابة
اجابة صحيحة: AD
السؤال #24
An engineer is building a data center network with VXLAN EVPN. The requirement is to use multicast for the broadcast, unknown unicast, and multicast replication.Which two VNI to multicast group mapping methods must be used to meet these requirements? (Choose two.)
A.
B.
C.
D.
عرض الإجابة
اجابة صحيحة: AC
السؤال #25
A network consultant proposes that the configuration of the Cisco UCS servers be based on service templates to facilitate the UCS infrastructure operation. The service profiles must remain connected to the template and be modified when the template settings are changed.Which configuration meets these requirements?
A. ervice profile with type set to Global
B. ervice profile with type set to Local
C. ervice profile template with type set to Updating
D. ervice profile template with type set to Initial
عرض الإجابة
اجابة صحيحة: C
السؤال #26
What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)
A. CIP
B. RE
C. MVPN
D. TV
عرض الإجابة
اجابة صحيحة: BC
السؤال #27
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for external connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network.Which two solutions must be used to meet these requirements? (Choose two.)
A. hysical interface
B. nterface VLAN
C. anagement interface
D. oopback interface
عرض الإجابة
اجابة صحيحة: AD
السؤال #28
DRAG DROP(Drag and Drop is not supported)Drag the appropriate from the left onto the current UDLD modes of operation on the right.Select and Place:
A. outes are based on the domain ID
B. outes are based on the distance vector protocol
C. SPF runs only on F Ports
D. SPF runs on a per-chassis basis
عرض الإجابة
اجابة صحيحة: A
السؤال #29
An engineer must design a VXLAN EVPN network. The solution should optimize broadcast, unknown unicast, and multicast (BUM) and short BUM replication, and use PIM anycast RP.Which solution should be included in the design?
A. AgP mode desirable
B. ACP mode auto
C. ACP mode active
D. AgP mode auto
عرض الإجابة
اجابة صحيحة: D
السؤال #30
A network engineer designs a Cisco Nexus data center network for a client-server farm using a pair of Nexus 9000 Series Switches in a vPC setup. Each server connects with two interfaces to both Nexus switches. The Nexus switches must always initiate the negotiation with the server.Which feature should be used in this design to ensure traffic is forwarded from the server to the data center network?
A. RRP
B. HRP
C. SRP
D. LBP
عرض الإجابة
اجابة صحيحة: C
السؤال #31
An engineer is implementing a storage area network where an NPV is used. The engineer notices that the servers in a storage farm are experiencing heavy traffic contention. The engineer needs to migrate traffic from heavily loaded server interfaces to interfaces with less load. When the new links are deployed, the existing traffic is not rebalanced as expected. Which feature must be used to meet these requirements?
A. PIV
B. ultiple VSAN support
C. PVM
D. isruptive load balancing
عرض الإجابة
اجابة صحيحة: A
السؤال #32
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)
A. ubnet address of BD1
B. ubnet address of L3Out
C. ubnet address of BD2
D. AT appliance
عرض الإجابة
اجابة صحيحة: CD
السؤال #33
DRAG DROP(Drag and Drop is not supported)Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.Select and Place:
A. PC+
B. -Trunk
C. AN port channel
D. ACP port channel
عرض الإجابة
اجابة صحيحة: A
السؤال #34
Refer to the exhibit.A cloud service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a Layer 2 topology to communicate with each other.Which Cisco ACI topology design meets these requirements?
A. ulti-Cloud
B. ulti-Site
C. ulti-Pod over OSPF EVPN
D. ulti-Pod over MP-BGP EVPN
عرض الإجابة
اجابة صحيحة: D
السؤال #35
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: B
السؤال #36
DRAG DROP(Drag and Drop is not supported)Drag and drop the configurations from the left onto the correct policies on the right.Select and Place:
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #37
DRAG DROP(Drag and Drop is not supported)A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.Select and Place:
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: A
السؤال #38
An engineer must build a VXLAN flood-and-learn network. The customer requires the solution to be based on the IETF documented practice in RFC 7348. The solution must use broadcast, unknown unicast, and multicast (BUM) and include the efficient BUM and short BUM replication modes that use only shared trees.Which technology meets these requirements?
A. VPN
B. IM sparse mode
C. IM SSM
D. idirectional PIM
عرض الإجابة
اجابة صحيحة: B
السؤال #39
A customer needs a design for a new data center network that meets these requirements:-Logically partition the environment into separate security domains.-Cut costs related to purchasing additional equipment.-Separate routing processes, TCAM, QoS tables, and data planes.Which technology must be used?
A. LAN
B. PC
C. DC
D. RF
عرض الإجابة
اجابة صحيحة: D
السؤال #40
An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch? Which two technologies meet this requirement? (Choose two.)
A. isco Intersight automatically creates an invisible cloud witness
B. isco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios
C. isco UCS Manager provides service profile portability across nodes
D. isco HyperFlex Edge provides native container support through the KVM hypervisor
عرض الإجابة
اجابة صحيحة: BC
السؤال #41
An engineer must deploy a Cisco HyperFlex system at two data centers. For redundancy reasons, the setup must achieve data protection in case of an entire site failure. The data must be available on both sites at all times to keep the recovery time objective to a minimum.Which Cisco HyperFlex deployment model meets these requirements?
A. OBO cluster
B. tretched cluster
C. dge with four nodes or more
D. tandard with eight nodes
عرض الإجابة
اجابة صحيحة: B
السؤال #42
A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:All traffic must pass over the upstream device for switching and domain IDs must be preserved in the fabric.Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.Which Fabric Interconnect SAN operational mode meets these requirements?
A. nd host
B. witch
C. PIV
D. ibre Channel
عرض الإجابة
اجابة صحيحة: B
السؤال #43
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
A. ee Explanation section for answer
عرض الإجابة
اجابة صحيحة: CD
السؤال #44
An engineer designs a Cisco UCS solution that must provide guaranteed and deterministic bandwidth to a specific server in the environment. The solution must apply to network and storage traffic of C-Series and B- Series servers.Which solution should be included to meet these requirements?
A. in the vNICs and the vHBAs of the service profile to dedicated uplink ports
B. in the IOM ports of the service profile to dedicated server ports
C. in the server ports of the service profile to dedicated uplink ports
D. in the vNICs and vHBAs of the service profile to dedicated server ports
عرض الإجابة
اجابة صحيحة: C
السؤال #45
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
A. GP ECMP
B. ayer 4 to Layer 7 device package
C. nline load-balancing device
D. TD
عرض الإجابة
اجابة صحيحة: B
السؤال #46
An engineer is designing a disaster recovery solution. In the event of a node failure, the solution should either direct all of the traffic to another node, or load-balance the traffic across the remaining nodes.Which solution should be implemented in the design?
A. ctive/active
B. old standby
C. ctive/passive
D. arm standby
عرض الإجابة
اجابة صحيحة: A
السؤال #47
Refer to the exhibit.A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
A. isco UCS Manager creates two separate fabric port channels
B. isco UCS Manager creates a single fabric port channel
C. he port channel is disabled until an administrator enables it manually
D. ach uplink that connects an IOM is configured as a discrete link
عرض الإجابة
اجابة صحيحة: A
السؤال #48
An engineer must logically partition two Cisco Nexus 7000 Series Switches into two environments called Test_1 and Production_1. The environments must use only F2-Series line cards and be limited to a maximum of 265 port-channels. Which Cisco Nexus feature must be used?
A. PC
B. DC
C. FC
D. RF
عرض الإجابة
اجابة صحيحة: D
السؤال #49
A network engineer is designing a Cisco Hyperflex infrastructure. The infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.Which storage connectivity method must be used to meet these requirements?
A. ibre Channel over Ethernet
B. nternet Small Computer Systems Interface
C. aw device mapping
D. erver message block
عرض الإجابة
اجابة صحيحة: A
السؤال #50
An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes, in addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6.Which two components should be used to meet these requirements? (Choose two.)
A. ead-end replication
B. IM sparse mode
C. IM dense mode
D. ngress replication
عرض الإجابة
اجابة صحيحة: BC
السؤال #51
An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster. Which two UCS policies meet these requirements? (Choose two.)
A. isco ACI Multisite Orchestrator
B. isco DNA Center
C. isco UCS Director
D. isco UCS Manager
عرض الإجابة
اجابة صحيحة: BE
السؤال #52
An engineer must interconnect two geographically separated data centers. The service provider offers a Layer 2 Metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between two sites requires a line-rate throughput regardless of the packet size and speed.Which solution meets these requirements?
A. 2TPv2
B. Psec
C. ACsec
D. 2TPv3
عرض الإجابة
اجابة صحيحة: C
السؤال #53
A network engineer must design a Cisco HyperFlex solution based on these requirements:•two clusters in the main data center consisting of five HyperFlex nodes•one edge node for the remote branch•cluster nodes that use one rack unit of spaceWhich two devices should be used in the remote branch cluster for this design? (Choose two.)
A. CS interconnect in Ethernet switching modeUCS interconnect in Fibre Channel switching modeFabric Interconnects uplinked to the Nexus device using an LACP port-channel in passive mode
B. CS interconnect in Ethernet end-host modeUCS interconnect in Fibre Channel end-host modeFabric Interconnects uplinked to the Nexus device using an LACP port-channel in passive mode
C. CS interconnect in Ethernet end-host modeUCS interconnect in Fibre Channel switching modeFabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode
D. CS interconnect in Ethernet switching modeUCS interconnect in Fibre Channel end-host modeFabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode
عرض الإجابة
اجابة صحيحة: AD
السؤال #54
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?
A. mbedded RP
B. hantom RP
C. SDP
D. IM anycast RP
عرض الإجابة
اجابة صحيحة: D
السؤال #55
An engineer is designing a Cisco Nexus 7000 Series disaster recovery site using the data center interconnect solution to provide gateway redundancy and needs to ensure that devices use gateways in their own data centers.Which design approach should be used to accomplish this goal?
A. FS localized to its own data center
B. PC localized to its own data center
C. HRP localized to its own data center
D. TP localized to its own data center
عرض الإجابة
اجابة صحيحة: C
السؤال #56
A company has several data centers around the world that must be interconnected over Layer2. The service provider supports MPLS services to all the locations. The proposed solution must be vendor agnostic and scalable enough to support the rapid growth of the company. Which data center technology is recommended to achieve this goal?
A. TV
B. XLAN EVPN
C. abricPath
D. oMPLS
عرض الإجابة
اجابة صحيحة: B
السؤال #57
A customer needs to deploy a three-tier network architecture that will consist of web, app, and other business- critical applications. The solution will include Cisco UCS 6324 Fabric Interconnects managing B and C series servers. The fabric interconnects will be connected to the Cisco Nexus 7706 Series Switch for network access. A storage array will be directly connected to the UCS fabric interconnects.Which UCS deployment type must be used to meet these requirements?
A. etwork
B. plink
C. erver
D. ppliance
عرض الإجابة
اجابة صحيحة: D
السؤال #58
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
A. FD
B. DLD
C. CP
D. LDP
عرض الإجابة
اجابة صحيحة: AD
السؤال #59
An engineer deploys VMware ESXi hypervisor on blade servers. The virtual networking is managed by Cisco Nexus 1000V Series Switches.Which configuration aligns with Cisco recommended practices for providing high availability and a maximum throughput to the VMware ESXi hosts?
A. ual vNICs with static EtherChannel link aggregation
B. ual vNICs with hardware fabric failover on the fabric interconnects
C. ual vNICs with MAC pinning link aggregation
D. ual vNICs with LACP link aggregation
عرض الإجابة
اجابة صحيحة: D

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.