لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
The fwd process on the Security Gateway sends logs to the fwd process on the Management Server via which 2 processes?
A. fwd via cpm
B. fwm via fwd
C. cpm via cpd
D. fwd via cpd
عرض الإجابة
اجابة صحيحة: A
السؤال #2
When installing a dedicated R80 SmartEvent server. What is the recommended size of the root partition?
A. Any size
B. Less than 20GB
C. More than 10GB and less than 20GB
D. At least 20GB
عرض الإجابة
اجابة صحيحة: C
السؤال #3
How many images are included with Check Point TE appliance in Recommended Mode?
A. 2(OS) images
B. images are chosen by administrator during installation
C. as many as licensed for
D. the most new image
عرض الإجابة
اجابة صحيحة: A
السؤال #4
With SecureXL enabled, accelerated packets will pass through the following:
A. Network Interface Card, OSI Network Layer, OS IP Stack, and the Acceleration Device
B. Network Interface Card, Check Point Firewall Kernal, and the Acceleration Device
C. Network Interface Card and the Acceleration Device
D. Network Interface Card, OSI Network Layer, and the Acceleration Device
عرض الإجابة
اجابة صحيحة: A
السؤال #5
Your manager asked you to check the status of SecureXL, and its enabled templates and features. What command will you use to provide such information to manager?
A. fw accel stat
B. fwaccel stat
C. fw acces stats
D. fwaccel stats
عرض الإجابة
اجابة صحيحة: A
السؤال #6
Which command would you use to set the network interfaces’ affinity in Manual mode?
A. sim affinity -m
B. sim affinity -l
C. sim affinity -a
D. sim affinity -s
عرض الإجابة
اجابة صحيحة: A
السؤال #7
If an administrator wants to add manual NAT for addresses now owned by the Check Point firewall, what else is necessary to be completed for it to function properly?
A. Nothing - the proxy ARP is automatically handled in the R80 version
B. Add the proxy ARP configurations in a file called /etc/conf/local
C. Add the proxy ARP configurations in a file called $FWDIR/conf/local
D. Add the proxy ARP configurations in a file called $CPDIR/conf/local
عرض الإجابة
اجابة صحيحة: C
السؤال #8
Which Check Point daemon monitors the other daemons?
A. fwm
B. cpd
C. cpwd
D. fwssd
عرض الإجابة
اجابة صحيحة: B
السؤال #9
Which of these is an implicit MEP option?
A. Primary-backup
B. Source address based
C. Round robin
D. Load Sharing
عرض الإجابة
اجابة صحيحة: C
السؤال #10
Which features are only supported with R80.10 Gateways but not R77.x?
A. Access Control policy unifies the Firewall, Application Control & URL Filtering, Data Awareness, and Mobile Access Software Blade policies
B. Limits the upload and download throughput for streaming media in the company to 1 Gbps
C. The rule base can be built of layers, each containing a set of the security rule
D. Layers are inspected in the order in which they are defined, allowing control over the rule base flow and which security functionalities take precedence
E. Time object to a rule to make the rule active only during specified times
عرض الإجابة
اجابة صحيحة: A
السؤال #11
What is the recommended configuration when the customer requires SmartLog indexing for 14 days and SmartEvent to keep events for 180 days?
A. Use Multi-Domain Management Server
B. Choose different setting for log storage and SmartEvent db
C. Install Management and SmartEvent on different machines
D. it is not possible
عرض الإجابة
اجابة صحيحة: B
السؤال #12
Check Point ClusterXL Active/Active deployment is used when:
A. Only when there is Multicast solution set up
B. There is Load Sharing solution set up
C. Only when there is Unicast solution set up
D. There is High Availability solution set up
عرض الإجابة
اجابة صحيحة: C
السؤال #13
To fully enable Dynamic Dispatcher on a Security Gateway:
A. run fw ctl multik set_mode 9 in Expert mode and then Reboot
B. Using cpconfig, update the Dynamic Dispatcher value to “full” under the CoreXL menu
C. Edit/proc/interrupts to include multik set_mode 1 at the bottom of the file, save, and reboot
D. run fw multik set_mode 1 in Expert mode and then reboot
عرض الإجابة
اجابة صحيحة: D
السؤال #14
How many interfaces can you configure to use the Multi-Queue feature?
A. 10 interfaces
B. 3 interfaces
C. 4 interfaces
D. 5 interfaces
عرض الإجابة
اجابة صحيحة: D
السؤال #15
How is communication between different Check Point components secured in R80? As with all questions, select the BEST answer.
A. By using IPSEC
B. By using SIC
C. By using ICA
D. By using 3DES
عرض الإجابة
اجابة صحيحة: A
السؤال #16
Which application should you use to install a contract file?
A. SmartView Monitor
B. WebUI
C. SmartUpdate
D. SmartProvisioning
عرض الإجابة
اجابة صحيحة: A
السؤال #17
You have existing dbedit scripts from R77. Can you use them with R80.10?
A. dbedit is not supported in R80
B. dbedit is fully supported in R80
C. You can use dbedit to modify threat prevention or access policies, but not create or modify layers
D. dbedit scripts are being replaced by mgmt_cli in R80
عرض الإجابة
اجابة صحيحة: D
السؤال #18
What Factor preclude Secure XL Templating?
A. Source Port Ranges/Encrypted Connections
B. IPS
C. ClusterXL in load sharing Mode
D. CoreXL
عرض الإجابة
اجابة صحيحة: C

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.