لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
What are two functions of the PFE? (Choose two.)
A. to maintain the forwarding tables
B. to apply the class of service function C
عرض الإجابة
اجابة صحيحة: AC
السؤال #2
A device receives a route update for network 172.19.0.0/16 from two different routing information sources. In this scenario, which parameter will determine the active route?
A. the route learned from the next hop with the highest IP address
B. the route learned with the lowest default route preference C
عرض الإجابة
اجابة صحيحة: B
السؤال #3
Which CIDR notation is the equivalent of the subnet mask of 255.255.192.0?A./19B./18C. /20D./17
عرض الإجابة
اجابة صحيحة: B
السؤال #4
Which statement about the Junos OS forwarding table is correct?
A. The forwarding table consolidates routes from multiple sources
B. The forwarding table is populated with active routes from the routing table C
عرض الإجابة
اجابة صحيحة: B
السؤال #5
Which three statements are true about IPv6 linl local addresses? (Choose three.)
A. They begin with the prefix fe80::/64
B. They can be assigned manually or dynamically
C. They are not guaranteed to be unique outside of the network segment
D. They are optional adddresses
E. They provide reachability to the internet
عرض الإجابة
اجابة صحيحة: ABC
السؤال #6
Which statement describes the ulst next-hop type that appears in the output of the show route forwarding-table command?
A. A list of unicast or multicast forwarding entries waiting to be resolved
B. A list of unicast destination prefixes for which packets will be silently discarded C
عرض الإجابة
اجابة صحيحة: C
السؤال #7
What is minimum configuration required for a Junos device to respond to SNMP requests?
A. set snmp community public authorization read only
B. set snmp public version v2 C
عرض الإجابة
اجابة صحيحة: C
السؤال #8
Click the Exhibit button You are connecting to a new device in your network and are presented with the information and prompt shown in the exhibit Which three steps must be carried out to edit the configuration on this device? (Choose three.)
A. Type configure at the > prompt
B. Log in using the root user with no password
E. Log in using the root user with the root 123 password
عرض الإجابة
اجابة صحيحة: AB
السؤال #9
Which two statements about exception traffic processing are correct? (Choose two.)
A. When congestion occurs, only exception traffic is given preference
B. By default, a rate-limiter for exception traffic exists on the internal link between the control plane and the forwarding plane C
عرض الإجابة
اجابة صحيحة: BC
السؤال #10
Which routing table is used for multicasting forwarding cache?
A. net
B. net
C. net
D. net
عرض الإجابة
اجابة صحيحة: C
السؤال #11
Click the Exhibit button Referring to the exhibit, which statement is correct?
A. Traffic destined to 10
B. Traffic destined to 10
عرض الإجابة
اجابة صحيحة: D
السؤال #12
Referring to the exhibit, what happens when ping packets are sent to management interface address of the local router?
A. The ping packets are silently discarded
B. An ICMP unreachable message is returned C
عرض الإجابة
اجابة صحيحة: D
السؤال #13
Which two statements are true about static routes in the Junos OS (Choose Two)
A. Static routes remain in the routing table until you remove them or until they become inactive
B. Static routes are learned by neighboring devices and added to their routing tables C
عرض الإجابة
اجابة صحيحة: AD
السؤال #14
You have entered the command "show log messages | match "error | kernel | panic" which statement is correct regarding the keywords error, kernel and panic in the output?
A. the output messages will contain all messages from the file except the ones that contain all three defined keywords
B. the output messages will contain all messages from the file that contains all three defined Keywords C
عرض الإجابة
اجابة صحيحة: B
السؤال #15
You issue a "request system zeroize" command. Which statement is correct in this scenario?
A. All data files remain unchanged but all configuration settings returned to factory defaults
B. All data files are deleted and all configuration settings are returned to factory defaults
عرض الإجابة
اجابة صحيحة: B
السؤال #16
You must verify that interface ge-0/0/0.0 is administratively up and that the link is up. In this scenario, which command will accomplish this task?
A. show configuration interfaces ge-0/0/0
B. show chassis fpc pic-status C
عرض الإجابة
اجابة صحيحة: D
السؤال #17
Which address correctly represents a valid abbreviation for the 2bfc:0000:0000:0000:0217:0000:fe8c:5c85/128 IPv6 address?
A. 2bfe::217:0:fe8c:5c85/128
B. 2bfe:0:217:-fe8c:5c85/128 C
عرض الإجابة
اجابة صحيحة: A
السؤال #18
Which three connection protocols allow you to gather operational information from the Junos device? (Choose three.)
A. NETCONF
B. Telnet C
عرض الإجابة
اجابة صحيحة: ABE
السؤال #19
What information is provided by the show route forwarding-table command?
A. the routing table stored on the RE
B. the protocol from where the route was learned C
عرض الإجابة
اجابة صحيحة: C
السؤال #20
Click the Exhibit button Referring to the exhibit, you are unable to reach devices in the 172.19.25.0/28 subnet. What should you do to solve this problem?
A. Enable the ge-0/0/2 interface
B. Enable the ge-0/0/2
عرض الإجابة
اجابة صحيحة: C
السؤال #21
What are two characteristics of UDP? (Choose two.)
A. UDP is connection-oriented
B. UDP packets are sent best-effort
عرض الإجابة
اجابة صحيحة: BD
السؤال #22
What is the name of the volume containing the software and files used for the day-to day operationof a device using Junos with upgraded FreeBSD?
A. /var
B. /active
C. /junos
D. /oam
عرض الإجابة
اجابة صحيحة: C
السؤال #23
Which two statements about login classes are correct? (Choose two.)
A. Login class permissions can be overridden for certain commands
B. Users can be members of multiple login classes
عرض الإجابة
اجابة صحيحة: CA
السؤال #24
Which layer of the OSI model does a router use to make forwarding decisions?
A. ayer 3
B. ayer 4
C. ayer 5
D. ayer 2
عرض الإجابة
اجابة صحيحة: A
السؤال #25
Which step is required when performing a Junos software upgrade?
A. You must create a user account named maintenance-user
B. You must reboot the device C
عرض الإجابة
اجابة صحيحة: B
السؤال #26
Click the Exhibit button A packet destined to the 172.27. 102.65 IP address is received by the ge-0/0/1.0 interface on your Junos device. The input firewall filter shown in the exhibit is applied to the ge-0/0/1.0 interface. Which two actions are performed in this scenario? (Choose two.)
A. The packet is logged
B. The packet is accepted C
عرض الإجابة
اجابة صحيحة: BC
السؤال #27
Which protocol is responsible for learning an IPv6 neighbor's IMAC address?
A. eighbor Discovery Protocol (NDP)
B. edia Access Control Security (MACsec)
C. ddress Resolution Protocol (ARP)
D. etwork Address Translation (NAT)
عرض الإجابة
اجابة صحيحة: A
السؤال #28
Which two features are implemented on the Packet Forwarding Engine? (Choose Two)
A. Chassis Management B
عرض الإجابة
اجابة صحيحة: BC
السؤال #29
Which two platforms are supposed in both physical and virtual form factors? Choose TWO
A. FX Series
B. CX Series
C. RX Series
D. X Series
عرض الإجابة
اجابة صحيحة: CD
السؤال #30
Click the Exhibit button. You want to make the OSPF route shown in the exhibit the active route for the 10.10.10.0/24 IP address. Which action is required to accomplish this task?
A. Set the static route to no-readvertise
B. Set the OSPF route preference to 4
عرض الإجابة
اجابة صحيحة: B
السؤال #31
Which two statements describe a routing policy?
A. Active and inactive routes are available for export from the routing table
B. A routing policy allows you to control the flow of information into the routing table
عرض الإجابة
اجابة صحيحة: BC
السؤال #32
Which default login class should you select if you want the user to edit configuration files?
A. read-only
B. unauthorized C
عرض الإجابة
اجابة صحيحة: C
السؤال #33
How would you change the display so that 40 lines will be displayed in the terminal program when you are logged into a junos device?
A. Set the window size of your terminal program
B. Issue that set cli screen-length 40 command from operational mode C
عرض الإجابة
اجابة صحيحة: B
السؤال #34
Which command allows you to execute operational mode commands while in configuration mode? A.activate
B. show C
عرض الإجابة
اجابة صحيحة: C
السؤال #35
You are asked to configure filter-based forwarding Which routing-instance type would you use? A.VRF
B. virtual router C
عرض الإجابة
اجابة صحيحة: D
السؤال #36
You suspect a duplicate MAC address on a subnet. You want to display the MAC, errors, and statisticsof the ge-O/0/0 interface.Which command will accomplish this task?
A. show arp
B. show interface ge-O/0/0 extensive
C. show ethernet-switching table
D. show interface terse
عرض الإجابة
اجابة صحيحة: B
السؤال #37
Which two interfaces are considered physical interface? Choose TWO A.Ge-0/0/0
B. Et-3/0/0:0
عرض الإجابة
اجابة صحيحة: AD
السؤال #38
You just received a new factory-default Junos device. Which two steps must be completed to connect and log in to the device? (Choose two.)
A. Connect to the device using an SSH connection
B. Log in with the user root and no password
عرض الإجابة
اجابة صحيحة: BC
السؤال #39
Click the Exhibit button You are capturing logs to troubleshoot an issue with IS-IS; however, the logs are increasing in size too quickly. Referring to the exhibit, which configuration statement would solve this problem?
A. set protocols isis traceoptions flag hello detail
B. set protocols isis traceoptions file files 10 C
عرض الإجابة
اجابة صحيحة: A
السؤال #40
Click the Exhibit button. You have applied the policy shown in the exhibit as an import policy to your BGP group In this scenario, what will happen when the router receives the 192.168.30.48/32 route? A.It will be sent to the default BGP policy
B. It wall match term-1 and be accepted
عرض الإجابة
اجابة صحيحة: D
السؤال #41
Which operational mode command will provide real-time usage statistics for the ge-0/0/0 interface?
A. show interfaces ge-0/0/0 extensive
B. monitor interface traffic C
عرض الإجابة
اجابة صحيحة: B
السؤال #42
Click the Exhibit button. -- Exhibit -- user@router> restart ^ unknown command. -- Exhibit -- You are troubleshooting a routing issue on a device running Junos. You receive the error shown in the exhibit when you attempt to restart the routing process. Which statement describes the problem?
A. The routing process can only be restarted from configuration mode
B. You do not have permission to restart the routing process
عرض الإجابة
اجابة صحيحة: D

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.