لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
SPC charts typically have the most recent data point on the right hand side.
A. True
B. False
عرض الإجابة
اجابة صحيحة: A
السؤال #2
A process can be defined as a repetitive and systematic series of steps or activities where inputs are modified or assembled to achieve a _______________ result.
A. Revenue total
B. Month end
C. Customer desired
D. Budgeted
عرض الإجابة
اجابة صحيحة: C
السؤال #3
Examples of Mistake Proofing for a laptop computer include which of these? (Note: There are 2 correct answers).
A. USB connection for a mouse
B. Open/Close button for CD Drive
C. Battery alignment pins
D. On/Off switch for computer
عرض الإجابة
اجابة صحيحة: AC
السؤال #4
If a process has Outliers which pair of charts is most preferable if subgroups will exist for the Continuous Data?
A. Individual-Moving Range
B. Xbar-R Charts
C. Xbar-S Charts
D. nP and P Charts
عرض الإجابة
اجابة صحيحة: B
السؤال #5
The Purchase Orders for Glenn Manufacturing Company were being copied by an employee and sent to four different departments yet only one department took an action based on the information in the PO. This is an example of ____________.
A. External Failure Costs
B. Appraisal Costs
C. Internal Failure Costs
D. Prevention Costs
عرض الإجابة
اجابة صحيحة: C
السؤال #6
Which of these statements describe an undesirable situation when implementing SPC? (Note: There are 2 correct answers).
A. The lower Control Limit for the R chart is equal to zero
B. The Control Limits are wider than the customer specification limits
C. A process is in Statistical Control before implementation of SPC
D. Attempt to use SPC for tracking transaction times at a warehouse
E. Indication of the specification limits on the Control Chart
عرض الإجابة
اجابة صحيحة: BE
السؤال #7
Cost of Poor Quality (COPQ) can be classified as either Tangible (Visible) Costs or Hidden Costs.
A. True
B. False
عرض الإجابة
اجابة صحيحة: A
السؤال #8
Voice of the Customer is a Lean Six Sigma technique to determine __________________ attributes of a product or service.
A. At least 6
B. The profitable
C. Critical-to-Quality
D. The majority of the
عرض الإجابة
اجابة صحيحة: C
السؤال #9
Typically a person who is trained to the skill level of a Black Belt is nearly 80% dedicated to applying Lean Six Sigma methodologies towards process solutions.
A. True
B. False
عرض الإجابة
اجابة صحيحة: B
السؤال #10
Training cost $6,500 and a project required an initial investment of $47,500. If the project yields monthly savings of $3,500 beginning after 4 months, what is the payback period in months, before money costs and taxes?
A. 9
B. 15
C. 19
D. 23
عرض الإجابة
اجابة صحيحة: C
السؤال #11
Customers make a purchase decision based on a number of factors. In Lean Six Sigma we refer to these decision points as CTQ’s which stands for __________.
A. Cost of the quantity
B. Conscious thought qualities
C. Conspicuous time quandaries
D. Critical-to-quality
عرض الإجابة
اجابة صحيحة: D
السؤال #12
Standardized work instructions apply to which resource in the process of interest?
A. People
B. Machines
C. Supervision
D. Engineering
عرض الإجابة
اجابة صحيحة: A
السؤال #13
In determining a ‘process average fraction defective’ using inductive or inferential statistics, we are making inferences about _______ based on__________ taken from_________.
A. Statistics, samples, populations
B. Population, samples, statistics
C. Population, samples, populations
D. Sample, statistics, population
عرض الإجابة
اجابة صحيحة: B
السؤال #14
Which of these is Discrete data?
A. The airplane needed 34 gallons of fuel
B. The bus arrived at 12:31 pm
C. 6 of 32 pupils failed the exam
D. His marathon time was 3:12
عرض الإجابة
اجابة صحيحة: C
السؤال #15
A Linear Regression model shows an R2 (adjusted) of 0.90 and a P-value of 0.002. A Quadratic Regression model of the same data shows an R2 (adjusted) of 0.92 and a P-value of 0.000. What can you conclude?
A. A linear model would be better than a quadratic model
B. A quadratic model would be better than a linear model
C. Any non-linear model would fit the data well
D. Any linear or non-linear model would fit the data well
E. Neither a linear or non-linear model fits the data well
F. The Residuals would be expected to be large for either a linear or quadratic
عرض الإجابة
اجابة صحيحة: D
السؤال #16
The practice of utilizing Poka-Yoke is also known as ________________.
A. Thorough integration
B. Mistake proofing
C. On site inspection
D. Lean controls
عرض الإجابة
اجابة صحيحة: B
السؤال #17
This output is what type of advanced Capability Analysis?
A. Continuous
B. Binomial
C. Poisson
D. Discreet
E. DPU
عرض الإجابة
اجابة صحيحة: B
السؤال #18
A Stable process is a process whose output is consistent over time. A primary tool used to analyze Stability would be a ________________.
A. Data Forward Plot
B. Bag Plot
C. Min/Max Plot
D. Time Series Plot
عرض الإجابة
اجابة صحيحة: D
السؤال #19
Examples of a Visual Factory include which of these? (Note: There are 2 correct answers).
A. White outlines on floor for proper inventory placement
B. Documented procedures with a numerical outline
C. Bad/Good indications of gauge readings with red and green outlines
D. Implementing a defect inspection device
عرض الإجابة
اجابة صحيحة: AC

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.