لا تريد أن تفوت شيئا؟

نصائح اجتياز امتحان الشهادة

آخر أخبار الامتحانات ومعلومات الخصم

برعاية وحديثة من قبل خبرائنا

نعم، أرسل لي النشرة الإخبارية

خذ اختبارات أخرى عبر الإنترنت
السؤال #1
You are creating a route filter that will match the network address of 192.168.64.0/24 In this scenario, which configuration statement will accomplish this task?
A. from route-filter 192
B. from route-filter 152
C. from route-filter 192
D. from route-filter 192
عرض الإجابة
اجابة صحيحة: D
السؤال #2
Which statement about the forwarding table is correct?
A. It contains all known routes including IPv6
B. It is only available on the PFE
C. It is only available on the RE
D. It is available on both the RE and the PFE
عرض الإجابة
اجابة صحيحة: B
السؤال #3
Click the Exhibit button. -- Exhibit -- user@router> restart ^ unknown command. -- Exhibit - You are troubleshooting a routing issue on a device running Junos. You receive the error shown in the exhibit when you attempt to restart the routing process. Which statement describes the problem?
A. The routing process can only be restarted from configuration mode
B. You do not have permission to restart the routing process
C. The routing process must be restarted from the shell
D. You have typed an invalid command
عرض الإجابة
اجابة صحيحة: D
السؤال #4
Which statement is true about a virtual router routing instance?
A. It can be used for Layer 3 VPN implementations
B. It can be used to create a separate routing table
C. An interface in the routing instance can also reside in the default routing instance
D. It automatically has import and export policies applied
عرض الإجابة
اجابة صحيحة: B
السؤال #5
What happens when a route does not match any user-configured policies?
A. The route is rejected
B. The route is accepted
C. The route is given a lower priority
D. The route is sent to the default policy
عرض الإجابة
اجابة صحيحة: C
السؤال #6
What is the maximum number of configurations, by default, that are recoverable using the rollback command?
A. 50
B. 25
C. 100
D. 75
عرض الإجابة
اجابة صحيحة: C
السؤال #7
Click the Exhibit button Which command will solve the problem shown in the exhibit?
A. user@routert# request system configuration rescue commit
B. user@router> request system configuration rescue save
C. user@router# file copy current /config/rescue
D. user@router> file copy current /config/rescue
عرض الإجابة
اجابة صحيحة: AC
السؤال #8
Depending on the device type, Junos is built upon which two OS kernels? (Choose two.)
A. NetBSD
B. FreeBSD
C. Linux
D. OpenBSD
عرض الإجابة
اجابة صحيحة: D
السؤال #9
Which protocol is responsible for learning an IPv6 neighbor's IMAC address?
A. Neighbor Discovery Protocol (NDP)
B. Media Access Control Security (MACsec)
C. Address Resolution Protocol (ARP)
D. Network Address Translation (NAT)
عرض الإجابة
اجابة صحيحة: C
السؤال #10
A packet enters a Junos device. No matching destination entry exists in the forwarding table. How will the device respond?
A. The RE responds to the source with a destination unreachable notification message
B. The PFE responds to the destination with a source unreachable notification message
C. The PFE responds to the source with a destination unreachable notification message
D. The RE responds to the destination with a source unreachable notification message
عرض الإجابة
اجابة صحيحة: C
السؤال #11
Which statement is true about default route preferences?
A. RIP is lower than RIPng
B. OSPF AS external is lower than OSPF internal
C. Direct is lower than Static
D. IBGP is lower than EBGP
عرض الإجابة
اجابة صحيحة: B
السؤال #12
Which two commands will provide the current configuration of the MX1-PE1 BGP group on your router? (Choose two.)
A. user@router# show groups | display set | match MX1-PE1
B. user@router# show | display set | match MX1-PE1
C. user@router> show configuration | match set | match MX1-PE1
D. user@router> show configuration | dispalv set | match MX1-PE1
عرض الإجابة
اجابة صحيحة: B
السؤال #13
Which command will replace the entire candidate configuration with the configuration stored in the reset. config file?
A. load replace reset
B. load override reset
C. load merge reset
D. rollback 1
عرض الإجابة
اجابة صحيحة: A
السؤال #14
You must archive log messages for an extended period of time for audit and troubleshooting purposes. Which syslog setting should you configure on the Junos device in this scenario?
A. host
B. facility
C. console
D. severity
عرض الإجابة
اجابة صحيحة: D
السؤال #15
By default, which character indicates the UNIX shell prompt?
A. %
B. $
C. >
D. #
عرض الإجابة
اجابة صحيحة: ABE
السؤال #16
Which default login class should you select if you want the user to edit configuration files?
A. read-only
B. unauthorized
C. super-user
D. operator
عرض الإجابة
اجابة صحيحة: B
السؤال #17
Click the Exhibit button Referring to the exhibit, you are unable to reach devices in the 172.19.25.0/28 subnet. What should you do to solve this problem?
A. Enable the ge-0/0/2 interface
B. Enable the ge-0/0/2
C. Enable the ge-0/0/2
D. Enable the ge-0/0/2
عرض الإجابة
اجابة صحيحة: AC
السؤال #18
Click the Exhibit button Referring to the exhibit, which statement is correct?
A. Traffic destined to 10
B. Traffic destined to 10
C. Traffic destined to 10
D. Traffic destined to 10
عرض الإجابة
اجابة صحيحة: D
السؤال #19
Which three connection protocols allow you to gather operational information from the Junos device? (Choose three.)
A. NETCONF
B. Telnet
C. XML
D. JSON
E. SSH
عرض الإجابة
اجابة صحيحة: ABE
السؤال #20
Which two statements are correct about the request system zeroize local command? (Choose two.)
A. The command preserves the management interface addresses
B. The command resets all key values
C. The command removes all data files
D. The command removes all user-created files from the system
عرض الإجابة
اجابة صحيحة: D

عرض الإجابات بعد التقديم

يرجى إرسال البريد الإلكتروني الخاص بك والواتس اب للحصول على إجابات الأسئلة.

ملحوظة: يرجى التأكد من صلاحية معرف البريد الإلكتروني وWhatsApp حتى تتمكن من الحصول على نتائج الاختبار الصحيحة.

بريد إلكتروني:
رقم الواتس اب/الهاتف:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.