Table of Contents
Password Recovery on BIG-IP 11.x–14.0
Applies to: BIG-IP 11.x, 12.x, 13.x, 14.0
Bootloader: GRUB 0.97 or GRUB2
Reboot into Single-User Mode
- Reboot the system via console.
- At the GRUB menu:
- GRUB2 platforms: highlight your kernel entry, press e, append
single(orsingle fastbootto skip fsck), then Ctrl-x to boot. - GRUB0.97 platforms: press e twice to edit the
kernelline, appendsingle, then press b to boot.
- GRUB2 platforms: highlight your kernel entry, press e, append
Note: If you’re uncertain which GRUB version your appliance uses, refer to F5’s K14658 KB article.
Reset the Root Password
Once you reach a prompt like switch_root:/#:
shell
mount -a
passwd rootmount -aensures all filesystems from/etc/fstabare mounted (including/as read-write).passwd rootinvokes the password-set utility—enter and confirm your new strong password.- Type
exitorrebootto continue normal boot.
After reboot, you can log in with your new root password.
Password Recovery on BIG-IP 14.0 and Later
F5 revised its architecture in 14.x, leveraging RD.BREAK to interrupt the boot process more cleanly.
Enter RD.BREAK Mode
- Reboot and, at the GRUB menu, highlight the kernel entry.
- Press e to edit; on the kernel line, append
rd.break. - Press Ctrl-x (or b) to boot into the minimal shell.
Identify Your Logical Volumes
shell
mount | grep /dev/mapper/vg–db
Typical output:
bash
/dev/mapper/vg–db–sda-set.2.root on /sysroot
/dev/mapper/vg–db–sda-set.2._usr on /sysroot/usrIf you see
vdainstead ofsda, substitute accordingly.
Remount Filesystems Read-Write
shell
mount -o remount,rw /sysroot
mount -o remount,rw /sysroot/usrMount Config & Var Volumes
Based on your “set” number (e.g., set.2):
shell
mount /dev/mapper/vg–db–sda-set.2._config /sysroot/config
mount /dev/mapper/vg–db–sda-set.2._var /sysroot/varVerify all are rw:
shell
mount | grep /dev/mapper/vg–dbChroot & Reset
shell
chroot /sysroot
passwd rootSet your new root password when prompted.
Ensure SELinux Relabeling
shell
touch /.autorelabelThis flags the filesystem for relabel on next boot.
Exit & Reboot
shell
exit # from chroot
exit # from switch_root shellSystem boots normally, and you can log in as root with your new password.
VIPRION Multi-Blade Note: On chassis with multiple blades, repeat the password change on the primary blade. After reboot, log into secondary and SSH via
ssh primary(key-auth) to propagate the change.
Special Cases & Considerations
RAID vs. Non-RAID on 14.1.0+
- Non-RAID platforms (14.1+): refer to KB K35811337.
- RAID-capable platforms (14.1+): refer to KB K23220345.
These outline slight variations in volume mappings when using hardware RAID controllers.
vCMP Guests
For BIG-IP instances running as vCMP guests, follow KB K14581 for single-user mode nuances.
Skipping FSCK
If forced filesystem checks prompt for passwords, append single fastboot instead of single for GRUB2 boots to skip checks.
Admin/User Password Recovery on rSeries
On F5 rSeries appliances (F5OS), “root” and “admin” reside in separate partitions and use a systemd-based boot:
- Reboot to the F5OS bootloader; at the boot menu, press e on the default image.
- On the
linuxefiline, appendrd.break. - Press Ctrl-x to continue into the maintenance shell.
- Remount overlays as read-write: bash
mount -o remount,rw /sysroot && mount -o remount,rw /sysroot/sysroot
chroot /sysroot
- Change the
admin(orroot) password:
passwd admin # or passwd root
- Reload SELinux policy & restore contexts:
load_policy -i
restorecon -v /etc/shadow- Update shadow tracker if needed (rSeries-specific):
awk -F: '/^admin:/{print "admin admin", $2, $3}' /etc/shadow >> /etc/libnss-udr/shadow.tracker
- Exit twice to continue boot; log in with your new credentials.
Don’t leave your exam success to chance. Sharpen your skills, reinforce key concepts, and boost your confidence with SPOTO’s F5 practice questions. Start preparing today and take the next step toward your F5 certification!
[Explore F5 Exam Dumps →]

















Comments