CCNA 200-301

CCNP Enterprise

CCNP Security

CCIE Enterprise Lab

CCIE Security Lab

CCNP Service Provider

CCNP Data Center

CCNP Collaboration

CCIE DC Lab

Before taking the 300-515 exam, you may test your knowledge with a free 300-515 practice test. The SPOTO CCNP Service Provider 300-515 test dumps fully describe what you will face on the real 300-515 exam, allowing you to pass the CCNP 300-515 exam quickly.

SPOTO experts supply the most up-to-date CCNP Service Provider study resources, which totally cover the 300-515 exam key points. You will decrease your CCNP Service Provider cost and be ready to pass your 300-515 test with our study materials if you use our comprehensive CCNP Service Provider resources.

CategoriesExam Code100% Pass Dumps
CCNP Service Provider350-501 SPCOR350-501 SPCOR
300-510 SPRI300-510 SPRI
300-515 SPVI300-515 SPVI
300-535 SPAUTO300-535 SPAUTO

Question: 1
Which utility can you use to validate an LSP in an MPLS environment?
A. uRPF
B. MPLS LSP ping
C. logging
D. RSVP
Answer: B

Question #:2
What is the primary function of a VRF on a router?
A. It enables the router to support multiple separate routing tables, which allows the device to handle
overlapping IP addresses.
B. It enables a router to run BGP and a distance vector routing protocol at the same time, which allows it
to serve as a VPN endpoint between remote sites.
C. It enables a router to configure VLANs locally, which provides segregation between networks.
D. It enables the router to provide faster switching through the network by using labels to identify the
input and output interfaces for neighbor routers. Answer: A

Question: 3
Which two statements describe primary differences between MPLS Layer 2 and Layer 3 VPNs? (Choose
two.)
A. Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use L2TPv3 tunneling.
B. Layer 2 VPNs use AToM, but Layer 3 VPNs use MPLS/BGP.
C. Layer 2 VPNs use BGP, but Layer 3 VPNs use VPLS.
D. Layer 2 VPNs use L2TPv3 tunneling, but Layer 3 VPNs use GRE tunneling.
E. Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use pseudowires to provide tunneling.
Answer: BD

Question: 4
Which utility can you use to validate an LSP in an MPLS environment?
A. uRPF
B. MPLS LSP ping
C. logging
D. RSVP
Answer: B

Question: 5
What is the primary function of a VRF on a router?

A. It enables the router to support multiple separate routing tables, which allows the device to handle
overlapping IP addresses.
B. It enables a router to run BGP and a distance vector routing protocol at the same time, which allows it
to serve as a VPN endpoint between remote sites.
C. It enables a router to configure VLANs locally, which provides segregation between networks.
D. It enables the router to provide faster switching through the network by using labels to identify the input
and output interfaces for neighbor routers.
Answer: A

Halloween sale

Get Halloween Huge Offers here to enjoy discounts on all IT certification exam dumps!!

Question: 6
Which two frames can be configured on an Ethernet flow point? (Choose two.)

A. of a specific VLAN
B. with different type of service values
C. with identical type of service value
D. with different class of service values
E. with no tags
Answer: AE

Question: 7
In an Ethernet Virtual Circuit environment, which restriction do bridge domains have when STP is running?
A. The STP mode must be RSTP or PVST+
B. Bridge domains must be mapped to a different VLAN.
C. The STP mode must be MSTP
D. Bridge domains must belong to different MST instances.
Answer: C

Question: 8
Which two statements describe primary differences between MPLS Layer 2 and Layer 3 VPNs? (Choose two.)

A. Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use L2TPv3 tunneling.
B. Layer 2 VPNs use AToM, but Layer 3 VPNs use MPLS/BGP.
C. Layer 2 VPNs use BGP, but Layer 3 VPNs use VPLS.
D. Layer 2 VPNs use L2TPv3 tunneling, but Layer 3 VPNs use GRE tunneling.
E. Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use pseudowires to provide tunneling.
Answer: BD

Question: 9

A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devices connected to them. While starting to configure, he experienced a connectivity issue. Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.) A. Configure PE3 to export route-targets 100:1 and 200:2.

B. Configure PE3 to import route-targets 100:1 and 200:2.
C. Configure PE4 to import route-targets 101:1 and 202:2.
D. Configure PE2 to export route-targets 300:3 and 400:4.
E. Configure PE1 to import route-targets 300:3 and 400:4.

Answer: AB

Question: 10
An engineer is investigating an MPLS LDP issue. Which command should an engineer use on a Cisco IOS XE device to display the contents of the LFIB?

A. show mpls forwarding-table
B. show mpls ldp neighbors
C. show mpls ldp labels
D. show mpls ldp bindings

Answer: A

Conclusion

We promise your success in the first attempt if you use SPOTO dumps as your 300-515 Exam preparation material. If you do not pass the 300-515 test (Implementing Cisco Service Provider VPN Services (SVPI)) on your first attempt, we will give you a FULL REFUND of your purchase price.

If you buy our 300-515 exam dump, you will get free updates to the Q&A subscription for your service.

Latest Passing Report-100% pass guarantee

Recommend Cisco exam study materials: 

Prepare Cisco 300-515 Exam with Latest 300-515 Practice Test
Access to Free Cisco 300-510 Practice Test Questions Answers
Is a CCNP 350-501 certificate still valuable?
Download 2021 Free Cisco 350-501 Exam Practice Test
2021 Free Real Cisco 350-501 Exam Demo and Practice Test
Please follow and like us:
Last modified: October 21, 2021

Author

Comments

Write a Reply or Comment

Your email address will not be published.