ccie wireless lab setup

    CCIE Wireless 400-351 Lab

    The CCIE Wireless Lab exam is made up of two modules:
  • 1: Diagnostic (the act or process of identifying the root cause)
  • 2: Configuration & Troubleshooting (implement and fix)


  • Get Dumps



Cisco Pass Report View More >

CCIE Security Written
Jul 18, 2019
CCIE Security Written
CCIE RS Written
Jul 18, 2019
CCIE RS Written
CCIE RS Written
Jul 18, 2019
CCIE RS Written
CCIE Security Written
Jul 18, 2019
CCIE Security Written
CCIE RS Lab
Jul 18, 2019
CCIE RS Lab
CCIE Data Center Written
Jul 17, 2019
CCIE Data Center Written
CCIE Security Lab
Jul 17, 2019
CCIE Security Lab
CCIE SP Lab
Jul 17, 2019
CCIE SP Lab
CCIE RS Written
Jul 17, 2019
CCIE RS Written
CCIE RS Written
Jul 17, 2019
CCIE RS Written

CCIE Written LAB Exam Format.


1. CCIE Wireless V5.0 LAB Examination Content:

2. CCIE Wireless LAB Study Plan

3. CCIE Wireless LAB Solutions DEMO


Section 1:Network Infrastructure
Section 1.1 Troubleshoot the network at Headquarters so that for the connections between the 3650s and the 4500s, corporate wireless user traffic for VLANs 101 and 102 only, use G1/0/20 on the 3650s as the primary forwarding link. G1/0/21 on 3650-1 and 3650-2 must be used exclusively as a backup connection.
Notes:
✔️Use an STP method that prioritizes how the local switches (that is, the 3650s) elect the root port.
✔️Configuration should be applied to the G1/0/21 interfaces only.
Solution:
3650-1
interface GigabitEthernet1/0/21
spanning-tree vlan (….) cost (…….)
3650-2
interface GigabitEthernet1/0/21
spanning-tree vlan (….) cost (…….)

Section 1.2 Routing is not working as expected at Headquarters as not all subnets are reachable from the HQ switches. Troubleshoot this problem so that routing works between all lab subnets.
✔️Only static routing is permitted to solve this task. Do not use the “ip default-gateway” command.
  • ccie wireless lab setup

  • 1319 Reviews
  • Switch basics First,ccie wireless lab setup, exchange basic knowledge "(1) The working principle of the Layer 2 switch -- Learning: When the switch receives an Ethernet data frame from a port, it learns its source MAC address and writes it to the MAC address table.