Date: 15th May
Thank you Tutor Lambert and all partners who han been working hardly these months, focus in study and you will get your rewards in the righ time.
Uptades has been uptaded in the RDP. My advise is practice and undertand the topology so if questions change you can resolve by yourself.
Diag: H2+ Same with WB
filter key word: icmpv6.type == 134
and first frame id is 227 (FE80::666)
I remember the static route command:
R2(config)#ip mroute 10.4.1.1 255.255.255.255 10.0.0.14
1)What is the issue
R3 has no route to RP
2)You will ask what to your engineer ?
why is 10.4.1.0/24 not in R3's RIB.
3)how to deal with current issues temporary ?
R3 (config) ip route 10.4.1.1 255.255.255.255 10.0.0.17
---> follow workbook to finish it
dont configure ip help-address 10.2.0.5/10.255.1.15 and ip dhcp relay infor trusted on SW3/SW4 first.
Advise when you are preparing
-Undertand very well the topology and protocols used in each TS or CFG
-Practice verifications commands (for preconfiguration)
-Read and undertand the requirements.
-follow workbook solution in its way or your way to practice.
Good luck for all you.