TS1 DiagH2++ H3

images
CCIE R&S Lab

Date: 8th May
Passed

TS1.
Q1. LAYER 2
The PC101 dont get IP.
-Mac Security configuration has the mac incorrect on SW2 port. Solution, delete bad mac and add correct mac in the Sw2 port security configuration to pc101.
-The configuration on e0/0 on PC101 was ip address dhcp client-id Ethernet0/0 hostname PC101. Solution: Scope R8 to PC101 add the host option.
Q2 Q3 Q4 Q5 Q6 Q7…. R3 R4 R5 R6…..

I change the route target export on R5 and R6 by 65100:5 and 65100:6 and also I change the Route target imports over R3 and R4.

Diag

Diag 2++
Same as spoto.

Config H3.
Same as spoto. I follow spoto solution.
-ON HQ and DC1 I add ip multicast routing over all devices, whitout it, the multicast dont work.
-On The DC1 check the routers IDs for OSPF. Add bgp routers IDs in any Devices.
-The ospf proceess between R42 and R100 is 2 not 10.

If anyone want the further I wrote u can ask for SPOTO