CCIE Service Provider v4.1 LAB & Training

Pass FeedbacksView More >

CCIE Wireless Lab
Jul 19, 2019
CCIE Wireless Lab
CCIE SP Lab
Jul 19, 2019
CCIE SP Lab
CCIE SP Lab
Jul 19, 2019
CCIE SP Lab
CCIE RS Lab
Jul 19, 2019
CCIE RS Lab
CCIE Data Center Lab
Jul 19, 2019
CCIE Data Center Lab
CCIE Data Center Lab
Jul 19, 2019
CCIE Data Center Lab
CCIE RS Lab
Jul 19, 2019
CCIE RS Lab
CCIE RS Lab
Jul 18, 2019
CCIE RS Lab
CCIE RS Lab
Jul 18, 2019
CCIE RS Lab
CCIE Data Center Lab
Jul 18, 2019
CCIE Data Center Lab

CCIE SP Lab Exam Information:
  TS :TS1、TS2、TS3(4 sets)、TS4
  DIAG:DIAG 1、DIAG 1+
  CFG:LAB1、LAB2
Special Dicount
Get special offers
Latest Solutions and feedback
Workbook & Solution & Feedbak

Product Advantages

  • Update Timely
  • Lab Mock Exam
  • 100% Cover Real Exam
  • Latest Lab Exam Feedbacks
  • 7/24 Online Technical Support
  • 100% Pass
  • Tutorial Video Guide
  • Average 50 Days Pass Period
  • 3 CCIE LAB Pass Everyday
  • 16 Years of IT training Experience
TS1 TopologyDownload Now
Task 1: multipathDownload Now

The ABC service provider enabled BGP multipath. An operations engineer identified that the IPv6 address of the Loopback 0 interface of the CLIENT1 does not have the two BGP next-hop entries in the RIB table of the ABC-ASBR131, as it was expected. Your task is to fix this issue.

After you complete this task, you must see the two BGP next-hop entries for the 2001:DB8::1/128 prefix as per this output:


Solution:

BORDER-RT#

router bgp 19

  address-family ipv6

    no neighbor 2001:DB8:1819::18 route-map COMM out

Task2:Security/TelnetDownload Now
Task3:MulticastDownload Now
Task4:MPLS QoSDownload Now
Task5:OSPFDownload Now
Task5:OSPFDownload Now
Task7:NAT64Download Now
Task8:ISIS-FRR SPFDownload Now
Task9:MPLS L3 VPNDownload Now
Task10:L2vpnDownload Now
Task11:ISISDownload Now

new TS (2019.3 TS4)Q2, MSCP. Was the question like this - BORDER and ABC share the multicast traffic flow. ABC-PEXXX has an igmp-join group command for x.x.x.x multicast address. BORDER-PXXX cannot ping the multicast address.           Sol-R


router msdp
 peer 172.16.0.111
 connect-source lo0
 remote-as 16
!

XE

ip msdp peer 172.17.0.211 connect-source lo0 remote-as 17
!

Task1:Download Now

This photo will update @3.25.

RT service provider has a point-to-multipoint L2VPN circuit provisioned between RT-EDGE1, RT-EDGE2, and RT-EDGE3. The status of this L2VPN circuit is DOWN. Fix this issue.

Switch1# show …snip…

Switch2# show …snip…



Sol-

RT-EDGE1, RT-EDGE2 & RT-EDGE3#

l2 vfi VPLS123 manual

bridge-domain 123

Task2:Download Now
…snip…
Task11:Download Now
…snip…
Q1 -System Level High AvailabilityDownload Now

ISP1 service provider must to improve high availability to increase their SLA to “five nines”.

John Smith, the operations engineer, is working with Andy Potter, the design engineer, to resolve the issue related to NSR. NSR was deployed in a few devices last weekend, and it seems it is not working as expected.

Based on the information that is provided, select the option from the drop-down list that describes the problem with NSR that John and Andy want to fix.


  • The Cisco IOS devices have both Cisco and IETF NSF enabled, but the Cisco IOS XR devices have only Cisco NSF enabled.
  • NSR is not enabled on A1-CRS-R4 device.
  • The IS-IS spf timers must match between Cisco IOS and Cisco IOS XR devices in order to NSR to work consistently.
  • NSR and NSF do not work together. NSF must be disabled.
  • NSR works only if ispf timers are specified.
  • There is a hardware issue. RP/DRP module should be replaced on A1-CRS-R4.
  • Opaque TLV capability must be negotiate during the IS-IS initialization in order to NSR to work properly.
  • Cisco IOS XR devices are not NSR compatible with Cisco IOS devices

Solution

A1-CRS-R4 does not have a second RP/DRP module

Q2 -Access and Aggregation –MulticastDownload Now
Q3 -L3VPNDownload Now
Q4 -Carrier EthernetDownload Now
Q5-Control Plane securityDownload Now
Q6 -MPLS Traffic EngineeringDownload Now
Q6 -MPLS Traffic EngineeringDownload Now
Q8 -Routing/Fast ConvergenceDownload Now
Section 1-Core RoutingDownload Now

Section 1.1 In the Yellow service provider network, the IPv4 topology must be different from the topology. Enable IS-IS in this network to support this requirement. Use the diagrams provided (diagram 1, 2, and 3).

Key-

Y-ISP modify IS-IS ipv4 & ipv6 topology.

Tips-

1.This section Yellow collour is config. Other is preconfig.

2.Y-P1, Y = Yellow.

Sol-

Y-P1#

interface GigabitEthernet4

  ip router isis

  ipv6 router isis

  isis network point-to-point


interface GigabitEthernet5

  ip router isis

  ipv6 router isis

  isis network point-to-point



interface Port-channel12

  ip router isis

  isis network point-to-point


router isis

  net 04.0000.0000.0001.00

  is-type level-2-only

  metric-style wide

  passive-interface Loopback0


  address-family ipv6

   multi-topology

  exit-address-family

 

Y-P2#

interface GigabitEthernet4

  ip router isis

  ipv6 router isis

  isis network point-to-point


interface GigabitEthernet5

  ip router isis

  ipv6 router isis

  isis network point-to-point


interface Port-channel12

  ip router isis

  isis network point-to-point

  Pls create PO when S3.1.

router isis

  net 04.0000.0000.0002.00

  is-type level-2-only

  metric-style wide

  passive-interface Loopback0


  address-family ipv6

  multi-topology

  exit-address-family

 

Y-PE3#

router isis 1

  is-type level-2-only

  net 04.0000.0000.0003.00

  address-family ipv4 unicast

    metric-style wide


  address-family ipv6 unicast

    metric-style wide

    no single-topology


interface Loopback0

  passive

  address-family ipv4 unicast


  address-family ipv6 unicast



interface GigabitEthernet0/0/0/0

  point-to-point

  address-family ipv4 unicast


  address-family ipv6 unicast



interface GigabitEthernet0/0/0/1

  point-to-point

  address-family ipv4 unicast


  address-family ipv6 unicast

 

Y-PE4#

interface GigabitEthernet2

  ip router isis

  ipv6 router isis

  isis network point-to-point


interface GigabitEthernet3

  ip router isis

  ipv6 router isis

  isis network point-to-point

 

router isis

  net 04.0000.0000.0004.00

  is-type level-2-only

  metric-style wide

  passive-interface Loopback0


  address-family ipv6

    multi-topology

exit-address-family

Verify.

Tips:

1.Pls open "debug login console" when practice and Save config.

2.When finish a section, pls wr.

...snip…

Section 2-Service Provider Architecture and ServicesDownload Now
Section 3-Access and AggregationDownload Now
Section 4-High Availability and Fast ConvergenceDownload Now
Section 5-Security, Operation, and ManagementDownload Now
CCIE Service Provider Lab Exam v4.1 Study Process

CCIE Service Provider Lab Exam V4.1 Study Plan

You can take CCIE Service Provider Lab exam after 2 months if you practice CCIE SP Lab materials 4 hours per day. SPOTO tutors and services will assist you along the whole preparation. Every module we do provide workbooks, solutions, and videos tutorial. You can watch videos first, and practice lab materials.
Phase 1:17 days to practice Configuration module(CFG1)and 5 days to review all sections.
Phase 2:17 days to practice Configuration module(CFG2)and 5 days to review all sections.
Phase 3: 10 days to practice Troubleshooting module (TS1 TS2 TS3 TS4)
Phase 4: 3 days to practice Diagnostic module (DIAG1, DIAG1+)
Phase 5:9 days to review all tasks.

How soon can I receive the learning materials?
The followings will be sent to your email no later than 8 hours after verification of your payment.
-Software and setup instructions
-Service Provider Lab Exam v4.1 Learning Materials, including Workbook, Solutions, and Instruction Video
-Service Provider Lab Exam v4.1 Study Plan
Important Notes
You need to book lab date before you can go into CFG2
we delivery materials phase by phase;
we delivery CFG2 after you complete CFG1;
we delivery TS after you complete CFG2;
How many remote rack hours are included?

Up to 200 hours within your service period. You can purchase additional hours at USD$ 200 per 40 hours within your service period. Please contact our tutor for extension.

How long is my service period?

Our standard service period is 3 months. In case you failed your first LAB-attempt within our standard 3 months, we will extend it to 4 months free of charge providing that you send us prove of your first failure, such as result screenshots with your full name on it. Please note we will stop all your services 3 days after your exam date if we were not notified of your free extension request.
You can also purchase additional month at USD $400 per month for a maximum of 2 additional months. You must apply within 2 months after your original service period expired, otherwise you have to re-purchase our standard service. In case you need a break during your service period, you can apply for account suspension for a minimal of 7 days. Please contact our tutor for any extension and suspension request.
We reserve the rights to terminate all the services in case we learned you have been sharing our materials with others. Thank you for your understanding.

What happens if the exam becomes unstable?

We make sure you will receive updated information and materials as soon as we learned any changes to the Service Provider Lab Exam. In case we learned any major changes happened during your service period, your remaining service period will be calculated from the date we learned the exam becomes stable again.

CCIE Service Provider Lab Training Videos

Last Week Results!

1200+

Customers passed CCIE Lab exam

96%

First-attempt pass rate

100%

SPOTO Lab materials Cover real exam

Product Reviews * The most recent comment are at the top

Diana 2019-07-19

I pass today, The dump is good. 90% questions are from this dump. so it is enough for the exam as long as you study this dump carefully and do the all questions especially the new questions.

Meredith 2019-07-17

hi guys. I passed my exam with good scores, Thanks a million.

Emma 2019-07-12

Valid dumps. I just used this dump one month and met many new questions which helped me a lot. Yesterday i just passed the exam with good scores. Thanks very much.

Estelle 2019-07-08

its really a nice dump.if we read it carefully it really motivates us i seriously like it.

Phoebe 2019-07-03

Great job, you guys. I passed my exam with your help! Thanks for everything!

Nzewure 2019-06-26

Passed today......... Thanks a lot guys! I only Study your manuals and sims. Valid dump! Good luck to u all~!

Harlan 2019-06-24

I will have the exam tomorrow. Good luck to me.

Maureen 2019-06-21

Do not worry! Use this dump for preparation. It will really help you to get good marks.

Max 2019-06-19

Still valid dump, passed the exam with 965. Good luck to all

Kirk 2019-06-14

I passed the exam today. This dump is valid and enough to your exam. I will share with my friends.