Test yourself with these 10 questions now!<\/p>\n
QUESTION 1<\/strong> QUESTION 2<\/strong> QUESTION 3<\/strong> QUESTION 4<\/strong> QUESTION 5<\/strong> QUESTION 6<\/strong> QUESTION 7<\/strong> QUESTION 8<\/strong> QUESTION 9<\/strong> QUESTION 10<\/strong> QUESTION 11<\/strong> QUESTION 12<\/strong> QUESTION 13<\/strong> If you want to get Cisco 300-425 certification, you should choose CCNP 300-425 exam dumps<\/a><\/strong><\/em> with offer to help you pass the CCNP 300-425 exam fast and quickly.<\/p>\n![\"\"](\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/09\/\u6309\u94ae-get-100-pass-dumps.gif\")
<\/a><\/p>\n
\nAn engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points <\/strong>using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer select?<\/strong>
\nA. 802.11i
\nB. 802.11ac
\nC. 802.11r
\nD. 802.11e
\nCorrect Answer: C<\/p>\n
\nA wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP<\/strong>
\nphones. Which dBm range is the network inspected against?<\/strong>
\nA. -78 to -65 dBm
\nB. -72 to -67 dBm
\nC. -85 to -65 dBm
\nD. -85 to -67 dBm
\nCorrect Answer: D<\/p>\n
\nAn engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients <\/strong>will be assigned a subnet by location. Which type of groups can the engineer use to map the smaller subnets to the <\/strong>corporate WLAN?<\/strong>
\nA. WLC port groups
\nB. RF groups
\nC. AP groups
\nD. interface groups
\nCorrect Answer: D<\/p>\n
\nDuring a client roaming event, which device is responsible for communicating the new Layer 2 EID mapping of a wireless supplicant to the fabric domain?<\/strong>
\nA. WLC
\nB. BN
\nC. CP2
\nD. CP1
\nCorrect Answer: A<\/p>\n
\nWhich non-Wi-Fi interferer can be identified by Metageek Chanalyzer?<\/strong>
\nA. PDAs
\nB. jammers
\nC. smartphones
\nD. printers
\nCorrect Answer: B<\/p>\n![\"ebook](\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2021\/08\/Fuzhou-CA-1-1.gif\")
<\/a><\/p>\n
\nWhich two considerations must a network engineer have when planning for voice over wireless roaming? (Choose two.)<\/strong>
\nA. Full reauthentication introduces gaps in a voice conversation.
\nB. Roaming time increases when using 802.1x + Cisco Centralized Key Manegement.
\nC. Roaming occurs when the phone has seen at least four APs.
\nD. Roaming occurs when the phone has reached -80 dBs or below.
\nE. Roaming with only 802.1x authentication requires full reauthentication.
\nCorrect Answer: AE<\/p>\n
\nWhen conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and<\/strong>
\ntablets must be considered? (Choose two.)<\/strong>
\nA. no support for 802.11ac
\nB. higher data rates than laptops
\nC. fewer antennas than laptops
\nD. no support for 802.11r
\nE. lower data rates than laptops
\nCorrect Answer: BC<\/p>\n
\nAn engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation <\/strong>should be considered?<\/strong>
\nA. The edge of the cell should be -67 dBm.
\nB. The edge of the cell should be below 35 RSSI.
\nC. The measurement should be done on the 2.4-GHz band.
\nD. One AP should be deployed per 3000 square feet.
\nCorrect Answer: A<\/p>\n
\nA wireless deployment in a high-density environment is being used by vendors to process credit card payment<\/strong>
\ntransactions via handheld mobile scanners. The scanners are having problems roaming between access points in the <\/strong>environment. Which feature on the wireless controller should have been incorporated in the design?<\/strong>
\nA. RX SOP
\nB. 802.11w
\nC. AP Heartbeat Timeout
\nD. Application Visibility Control
\nCorrect Answer: A<\/p>\n
\nAn engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and<\/strong>
\nEPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable <\/strong>the communication?<\/strong>
\nA. UDP port 16666
\nB. IP protocol 97
\nC. UDP port 97
\nD. TCP port 97
\nCorrect Answer: A<\/p>\n
\nClustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single <\/strong>Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 <\/strong>depending on the platform?<\/strong>
\nA. up to 20 WLCs and 1000 APs
\nB. up to 20 WLCs and 3000 APs
\nC. up to 20 WLCs and 4000 APs
\nD. up to 20 WLCs and 6000 APs
\nCorrect Answer: D<\/p>\n
\nA customer is running a guest WLAN with a foreign\/export-anchor setup. There is one anchor WLC in the US and two in <\/strong>Europe. Anchor WLC priorities are used to prefer local anchors. During a routine network audit, it is discovered that a <\/strong>large number of guest client sessions in the US are anchored to the WLCs in Europe. Which reason explains this <\/strong>behavior?<\/strong>
\nA. The foreign WLC failed and recovered.
\nB. The US anchor WLC failed and recovered.
\nC. The US anchor WLC is anchored to itself with a priority value of zero.
\nD. The anchor WLC is in the same mobility group.
\nCorrect Answer: B<\/p>\n
\nA customer is concerned about mesh backhaul link security. Which level of ecnryption does the backhaul link use?<\/strong>
\nA. hash
\nB. AES
\nC. WEP
\nD. 3DES
\nCorrect Answer: B<\/p>\nConclusion<\/strong><\/h2>\n
Latest Passing Report-100% pass guarantee<\/strong><\/h2>\n