{"id":24631,"date":"2026-11-18T09:46:47","date_gmt":"2026-11-18T01:46:47","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html"},"modified":"2026-11-18T09:46:47","modified_gmt":"2026-11-18T01:46:47","slug":"how-to-check-span-port-on-cisco-switch","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html","title":{"rendered":"How to Check SPAN Port on Cisco Switch"},"content":{"rendered":"<p>Verifying whether a Switched Port Analyzer (SPAN) session is active\u2014and confirming which interfaces are acting as traffic sources or capture destinations\u2014is a routine requirement during network troubleshooting, security auditing, and packet analysis. Because a SPAN destination port behaves differently from standard switching ports, checking its configuration only through basic interface counters can easily lead to misinterpretation. This guide provides the exact command-line workflows to inspect, compare, configure, and troubleshoot SPAN sessions across Cisco switches.<\/p>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#CLI_Commands_to_Check_Active_SPAN_Sessions_on_Cisco_Switches\" title=\"CLI Commands to Check Active SPAN Sessions on Cisco Switches\">CLI Commands to Check Active SPAN Sessions on Cisco Switches<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Output_Template_and_Field_Interpretation\" title=\"Output Template and Field Interpretation\">Output Template and Field Interpretation<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Checking_SPAN_Ports_on_Cisco_Nexus_NX-OS_vs_Catalyst_IOSIOS-XE\" title=\"Checking SPAN Ports on Cisco Nexus (NX-OS) vs. Catalyst (IOS\/IOS-XE)\">Checking SPAN Ports on Cisco Nexus (NX-OS) vs. Catalyst (IOS\/IOS-XE)<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Step_1_Check_the_High-Level_Session_Summary\" title=\"Step 1: Check the High-Level Session Summary\">Step 1: Check the High-Level Session Summary<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Step_2_Inspect_Detailed_Session_Parameters\" title=\"Step 2: Inspect Detailed Session Parameters\">Step 2: Inspect Detailed Session Parameters<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Step_3_Verify_Encapsulated_Remote_SPAN_ERSPAN_Sessions\" title=\"Step 3: Verify Encapsulated Remote SPAN (ERSPAN) Sessions\">Step 3: Verify Encapsulated Remote SPAN (ERSPAN) Sessions<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Step_4_Audit_the_Running_Configuration_Syntax\" title=\"Step 4: Audit the Running Configuration Syntax\">Step 4: Audit the Running Configuration Syntax<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#How_to_Configure_Modify_or_Remove_a_Cisco_SPAN_Session\" title=\"How to Configure, Modify, or Remove a Cisco SPAN Session\">How to Configure, Modify, or Remove a Cisco SPAN Session<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Step_1_Define_the_SPAN_Source_Port_or_VLAN\" title=\"Step 1: Define the SPAN Source Port or VLAN\">Step 1: Define the SPAN Source Port or VLAN<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Step_2_Define_the_SPAN_Destination_Port\" title=\"Step 2: Define the SPAN Destination Port\">Step 2: Define the SPAN Destination Port<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Step_3_Add_or_Remove_Individual_Sources_in_an_Existing_Session\" title=\"Step 3: Add or Remove Individual Sources in an Existing Session\">Step 3: Add or Remove Individual Sources in an Existing Session<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Step_4_Delete_a_SPAN_Session_Completely\" title=\"Step 4: Delete a SPAN Session Completely\">Step 4: Delete a SPAN Session Completely<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Troubleshooting_Common_Cisco_SPAN_Port_Issues\" title=\"Troubleshooting Common Cisco SPAN Port Issues\">Troubleshooting Common Cisco SPAN Port Issues<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Why_does_my_SPAN_destination_port_show_up_line_protocol_is_down_monitoring\" title=\"Why does my SPAN destination port show &#8220;up, line protocol is down (monitoring)&#8221;?\">Why does my SPAN destination port show &#8220;up, line protocol is down (monitoring)&#8221;?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#How_do_I_check_for_SPAN_port_packet_drops_caused_by_bandwidth_oversubscription\" title=\"How do I check for SPAN port packet drops caused by bandwidth oversubscription?\">How do I check for SPAN port packet drops caused by bandwidth oversubscription?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Why_is_my_SPAN_capture_missing_8021Q_VLAN_tags\" title=\"Why is my SPAN capture missing 802.1Q VLAN tags?\">Why is my SPAN capture missing 802.1Q VLAN tags?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Why_am_I_seeing_duplicate_packets_in_my_packet_capture\" title=\"Why am I seeing duplicate packets in my packet capture?\">Why am I seeing duplicate packets in my packet capture?<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Local_SPAN_vs_RSPAN_vs_ERSPAN_vs_Network_TAPs\" title=\"Local SPAN vs. RSPAN vs. ERSPAN vs. Network TAPs\">Local SPAN vs. RSPAN vs. ERSPAN vs. Network TAPs<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Cisco_Official_Documentation_and_Command_Reference_Resources\" title=\"Cisco Official Documentation and Command Reference Resources\">Cisco Official Documentation and Command Reference Resources<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"CLI_Commands_to_Check_Active_SPAN_Sessions_on_Cisco_Switches\"><\/span>CLI Commands to Check Active SPAN Sessions on Cisco Switches<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Use the following Cisco IOS and IOS-XE privileged EXEC commands to inspect active port mirroring sessions, verify physical port states, and extract the underlying configuration lines.<\/p>\n<pre><code class=\"language-ios\">! 1. Display all configured SPAN and RSPAN sessions on the switch\nSwitch# show monitor session all\n\n! 2. Inspect a specific SPAN session by session ID (1 to 66)\nSwitch# show monitor session 1\n\n! 3. Filter by session type (local or remote)\nSwitch# show monitor session local\nSwitch# show monitor session remote\n\n! 4. Check physical port status to identify ports in the &quot;monitoring&quot; state\nSwitch# show interfaces status | include monitoring\n\n! 5. Inspect detailed operational state of a specific SPAN destination port\nSwitch# show interfaces GigabitEthernet1\/0\/48\n\n! 6. View exact SPAN configuration statements in the running configuration\nSwitch# show running-config | include monitor session\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Output_Template_and_Field_Interpretation\"><\/span>Output Template and Field Interpretation<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When you run <code>show monitor session 1<\/code>, the switch returns a structured status block similar to the template below:<\/p>\n<pre><code class=\"language-text\">Session 1\n---------\nType                   : Local Session\nSource Ports           : \n    Both               : Gi1\/0\/1-2\n    Rx Only            : Gi1\/0\/3\n    Tx Only            : None\nSource VLANs           : \n    Both               : 10,20\nDestination Ports      : Gi1\/0\/48\n    Encapsulation      : Native\n          Ingress      : Disabled\n<\/code><\/pre>\n<ul>\n<li><strong><code>Type<\/code><\/strong>: Indicates whether the session is a <code>Local Session<\/code>, <code>Remote Source Session<\/code>, <code>Remote Destination Session<\/code>, or <code>ERSPAN Source\/Destination Session<\/code>.<\/li>\n<li><strong><code>Source Ports<\/code> \/ <code>Source VLANs<\/code><\/strong>: Lists the monitored interfaces or VLANs broken down by capture direction (<code>Rx Only<\/code> for ingress, <code>Tx Only<\/code> for egress, or <code>Both<\/code>).<\/li>\n<li><strong><code>Destination Ports<\/code><\/strong>: Identifies the physical switch port connected to your packet capture appliance or analyzer (such as Wireshark or an IDS sensor).<\/li>\n<li><strong><code>Encapsulation<\/code><\/strong>: Shows <code>Native<\/code> (VLAN tags stripped on egress) or <code>Replicate<\/code> (original 802.1Q VLAN tags preserved).<\/li>\n<li><strong><code>Ingress<\/code><\/strong>: Displays <code>Disabled<\/code> by default, ensuring the analyzer cannot inject traffic back into the switch through the destination port.<\/li>\n<\/ul>\n<h2><span class=\"ez-toc-section\" id=\"Checking_SPAN_Ports_on_Cisco_Nexus_NX-OS_vs_Catalyst_IOSIOS-XE\"><\/span>Checking SPAN Ports on Cisco Nexus (NX-OS) vs. Catalyst (IOS\/IOS-XE)<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>While the commands above apply directly to enterprise Catalyst switches running Cisco IOS or IOS-XE, data center Cisco Nexus switches running NX-OS use a modular configuration structure and report session health differently. Follow this progression to verify SPAN sessions across both operating systems.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Check_the_High-Level_Session_Summary\"><\/span>Step 1: Check the High-Level Session Summary<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>On Catalyst IOS\/IOS-XE, <code>show monitor session all<\/code> immediately outputs the full configuration details of every session. On Nexus NX-OS, start by running the shorter <code>show monitor<\/code> command to view a tabular summary of all sessions, including their administrative state and failure reasons:<\/p>\n<pre><code class=\"language-nxos\">Nexus9K# show monitor\nSession  State        Reason                  Description\n-------  -----------  ----------------------  --------------------------------\n1        up           The session is up       Production_Firewall_Capture\n2        down         Session admin shut      Temp_Debug_Session\n<\/code><\/pre>\n<p>Unlike Catalyst switches\u2014where a session becomes active as soon as both a source and destination are defined\u2014NX-OS creates monitor sessions in an administratively <code>shut<\/code> state by default.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Inspect_Detailed_Session_Parameters\"><\/span>Step 2: Inspect Detailed Session Parameters<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To view the source and destination mappings on NX-OS, run <code>show monitor session &lt;id&gt;<\/code> or <code>show monitor session all<\/code>. Compare the output fields with Catalyst IOS-XE:<br \/>\n* <strong>Catalyst IOS\/IOS-XE<\/strong> reports port direction under <code>Rx Only<\/code>, <code>Tx Only<\/code>, and <code>Both<\/code> headings without an explicit session health line.<br \/>\n* <strong>Nexus NX-OS<\/strong> explicitly lists <code>State: up (The session is up)<\/code> or a specific hardware\/configuration error reason at the top of the output, followed by <code>RxConfigured<\/code>, <code>TxConfigured<\/code>, and <code>BothConfigured<\/code> interface lists.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Verify_Encapsulated_Remote_SPAN_ERSPAN_Sessions\"><\/span>Step 3: Verify Encapsulated Remote SPAN (ERSPAN) Sessions<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When checking Layer 3 routed SPAN sessions across platforms:<br \/>\n* <strong>On Catalyst IOS-XE<\/strong>, run <code>show monitor session all<\/code>. Look for <code>Type: ERSPAN Source Session<\/code>, along with the <code>ERSPAN ID<\/code>, <code>Destination IP<\/code>, and <code>Origin IP<\/code> fields at the bottom of the block.<br \/>\n* <strong>On Nexus NX-OS<\/strong>, run <code>show monitor session erspan-source<\/code> (or <code>show monitor session &lt;id&gt;<\/code>) to verify the <code>erspan-id<\/code>, <code>vrf<\/code>, <code>destination-ip<\/code>, and GRE tunnel operational status.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Audit_the_Running_Configuration_Syntax\"><\/span>Step 4: Audit the Running Configuration Syntax<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Because Catalyst and Nexus switches store SPAN settings differently in NVRAM, use platform-specific filters to audit the configuration:<br \/>\n* <strong>Catalyst (Flat Global Statements)<\/strong>: Run <code>show running-config | include monitor session<\/code> to pull all single-line global declarations.<br \/>\n* <strong>Nexus (Hierarchical Sub-Mode)<\/strong>: Run <code>show running-config monitor<\/code> to display the nested configuration blocks (<code>monitor session 1<\/code>, <code>source interface ...<\/code>, <code>destination interface ...<\/code>, <code>no shut<\/code>) alongside the required <code>switchport monitor<\/code> command under the destination interface stanza.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Configure_Modify_or_Remove_a_Cisco_SPAN_Session\"><\/span>How to Configure, Modify, or Remove a Cisco SPAN Session<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Once you have inspected the existing sessions on your switch and confirmed which session numbers and ports are available, you can create a new session, update active sources, or clean up stale sessions.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Define_the_SPAN_Source_Port_or_VLAN\"><\/span>Step 1: Define the SPAN Source Port or VLAN<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Enter global configuration mode and specify the session number, the source interface (or VLAN), and the traffic direction (<code>rx<\/code>, <code>tx<\/code>, or <code>both<\/code>). If you omit the direction keyword, Cisco IOS defaults to <code>both<\/code>.<\/p>\n<pre><code class=\"language-ios\">Switch# configure terminal\n! Mirror both ingress and egress traffic from a physical interface\nSwitch(config)# monitor session 1 source interface GigabitEthernet1\/0\/1 both\n\n! Or mirror only ingress traffic across an entire VLAN to prevent duplicate packets\nSwitch(config)# monitor session 1 source vlan 10 rx\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Define_the_SPAN_Destination_Port\"><\/span>Step 2: Define the SPAN Destination Port<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Assign the physical port where your packet analyzer or security sensor is connected. If your source port is an 802.1Q trunk and you need to inspect VLAN tags in your capture tool, include the <code>encapsulation replicate<\/code> option.<\/p>\n<pre><code class=\"language-ios\">! Standard destination port configuration\nSwitch(config)# monitor session 1 destination interface GigabitEthernet1\/0\/48\n\n! Destination port configuration preserving 802.1Q VLAN tags\nSwitch(config)# monitor session 1 destination interface GigabitEthernet1\/0\/48 encapsulation replicate\n<\/code><\/pre>\n<p><em>(Note: On Cisco Nexus NX-OS, you must first configure <code>switchport monitor<\/code> directly under <code>interface Ethernet1\/48<\/code>, and then run <code>no shut<\/code> inside the <code>monitor session 1<\/code> configuration sub-mode.)<\/em><\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Add_or_Remove_Individual_Sources_in_an_Existing_Session\"><\/span>Step 3: Add or Remove Individual Sources in an Existing Session<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>You do not need to delete an entire session to change what is being monitored. Adding a new <code>source<\/code> statement appends that port to the active session. Prefixing a specific source statement with <code>no<\/code> removes only that interface while leaving the rest of the session intact.<\/p>\n<pre><code class=\"language-ios\">! Append an additional source port to Session 1\nSwitch(config)# monitor session 1 source interface GigabitEthernet1\/0\/5 rx\n\n! Remove only GigabitEthernet1\/0\/2 from Session 1 without disrupting Gi1\/0\/1 or Gi1\/0\/5\nSwitch(config)# no monitor session 1 source interface GigabitEthernet1\/0\/2\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Delete_a_SPAN_Session_Completely\"><\/span>Step 4: Delete a SPAN Session Completely<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When packet capture is finished, remove the session in global configuration mode to release hardware resources and return the destination interface to normal Layer 2 switching operation.<\/p>\n<pre><code class=\"language-ios\">! Delete a single SPAN session\nSwitch(config)# no monitor session 1\n\n! Or clear all configured SPAN sessions on the switch\nSwitch(config)# no monitor session all\nSwitch(config)# end\nSwitch# write memory\n<\/code><\/pre>\n<h2><span class=\"ez-toc-section\" id=\"Troubleshooting_Common_Cisco_SPAN_Port_Issues\"><\/span>Troubleshooting Common Cisco SPAN Port Issues<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Even when <code>show monitor session all<\/code> shows a valid configuration, physical state alerts or hardware limitations can prevent traffic from reaching your packet capture tool. Below are solutions to the most common problems discovered when checking a SPAN port.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Why_does_my_SPAN_destination_port_show_up_line_protocol_is_down_monitoring\"><\/span>Why does my SPAN destination port show &#8220;up, line protocol is down (monitoring)&#8221;?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When you check a SPAN destination port on a Catalyst switch using <code>show interfaces<\/code>, seeing <code>GigabitEthernet1\/0\/48 is up, line protocol is down (monitoring)<\/code> is normal behavior, not a link failure. The switch places the line protocol into the <code>down (monitoring)<\/code> state to disable spanning tree (STP), CDP, ARP, and MAC address learning on that port, preventing network loops and blocking outbound management frames from polluting your packet capture. <\/p>\n<p>If your analyzer still captures zero packets while the port is in this state:<br \/>\n1. Confirm the physical link state is <code>up<\/code> (not <code>administratively down<\/code> or <code>notconnect<\/code>).<br \/>\n2. Verify that the capture NIC on your server or laptop is running in <strong>promiscuous mode<\/strong>.<br \/>\n3. Check the source port counters (<code>show interfaces &lt;source-port&gt;<\/code>) to verify that traffic is actively traversing the monitored interface.<br \/>\n4. On Nexus NX-OS, ensure the session state is not <code>down (Session admin shut)<\/code> by entering <code>no shut<\/code> under the monitor session.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"How_do_I_check_for_SPAN_port_packet_drops_caused_by_bandwidth_oversubscription\"><\/span>How do I check for SPAN port packet drops caused by bandwidth oversubscription?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When you mirror multiple active ports (for example, four 1 Gbps ports monitored in <code>both<\/code> directions, generating up to 8 Gbps of aggregate traffic) onto a single 1 Gbps destination port, the destination buffer will quickly saturate and drop mirrored frames. Cisco switches prioritize production traffic and silently drop excess SPAN frames when a destination port is oversubscribed.<\/p>\n<p>To verify if your SPAN destination port is dropping packets, check its outbound queue and interface drop counters:<\/p>\n<pre><code class=\"language-ios\">Switch# show interfaces GigabitEthernet1\/0\/48 | include output drops|Output queue|packets output\n  Input queue: 0\/2000\/0\/0 (size\/max\/drops\/flushes); Total output drops: 148920\n<\/code><\/pre>\n<p>On Catalyst 9000 Series switches running IOS-XE, you can also inspect ASIC-level queue drops with <code>show platform hardware fed switch active qos queue stats interface GigabitEthernet1\/0\/48<\/code>. To stop oversubscription drops, restrict monitoring to <code>rx<\/code> only, apply a VLAN filter (<code>monitor session 1 filter vlan 10,20<\/code>), or use a higher-speed interface as the destination port.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Why_is_my_SPAN_capture_missing_8021Q_VLAN_tags\"><\/span>Why is my SPAN capture missing 802.1Q VLAN tags?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>By default, a Cisco SPAN destination port operates in <code>Native<\/code> encapsulation mode, which strips all 802.1Q trunk tags before transmitting mirrored frames out of the destination interface. As shown in the configuration steps earlier, you must append <code>encapsulation replicate<\/code> to the destination interface command to preserve VLAN headers. If <code>show monitor session all<\/code> already shows <code>Encapsulation : Replicate<\/code> and tags are still missing in Wireshark, check your host operating system&#8217;s network adapter settings\u2014many Windows and Linux NIC drivers strip 802.1Q headers in hardware unless VLAN tag preservation is enabled in the driver properties.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Why_am_I_seeing_duplicate_packets_in_my_packet_capture\"><\/span>Why am I seeing duplicate packets in my packet capture?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Duplicate frames typically occur when monitoring an entire VLAN or multiple ports in the same VLAN using the <code>both<\/code> direction. When Host A (on Port 1) sends a frame to Host B (on Port 2) within the same switch and VLAN, the SPAN engine copies the frame once as it enters Port 1 (<code>rx<\/code>) and a second time as it exits Port 2 (<code>tx<\/code>). Reconfigure the session to capture only ingress traffic (<code>rx<\/code>) on the source VLAN or source ports so each frame is mirrored only once.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Local_SPAN_vs_RSPAN_vs_ERSPAN_vs_Network_TAPs\"><\/span>Local SPAN vs. RSPAN vs. ERSPAN vs. Network TAPs<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When planning packet visibility across an enterprise or data center network, understanding hardware session limits and architectural trade-offs helps determine whether a native Cisco SPAN mode is sufficient or if a dedicated hardware network TAP is required.<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Comparison Criteria<\/th>\n<th style=\"text-align: left;\">Local SPAN<\/th>\n<th style=\"text-align: left;\">Remote SPAN (RSPAN)<\/th>\n<th style=\"text-align: left;\">Encapsulated Remote SPAN (ERSPAN)<\/th>\n<th style=\"text-align: left;\">Hardware Network TAP<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><strong>Traffic Scope &amp; Transport<\/strong><\/td>\n<td style=\"text-align: left;\">Source and destination ports reside on the same physical switch (or switch stack).<\/td>\n<td style=\"text-align: left;\">Mirrors traffic across multiple Layer 2 switches using a dedicated RSPAN VLAN over 802.1Q trunks.<\/td>\n<td style=\"text-align: left;\">Mirrors traffic across Layer 3 IP networks by encapsulating frames inside GRE tunnels.<\/td>\n<td style=\"text-align: left;\">Physical Layer 1 device inserted inline on a copper or fiber link.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Typical Cisco Session Limits<\/strong><\/td>\n<td style=\"text-align: left;\"><strong>Catalyst 2960\/3560:<\/strong> 2 active source sessions.<br \/><strong>Catalyst 9300\/9500:<\/strong> Up to 66 configured, max 8 active source sessions.<br \/><strong>Nexus 9000:<\/strong> Up to 32 configured, 4\u201318 active bidirectional (ASIC-dependent).<\/td>\n<td style=\"text-align: left;\">Shares the same active hardware source session limits as Local SPAN on the source switch; adds Layer 2 trunk bandwidth overhead.<\/td>\n<td style=\"text-align: left;\">Shares hardware source session limits; supported on Catalyst 6500\/9000, ASR, and Nexus platforms (not available on entry-level Layer 2 switches).<\/td>\n<td style=\"text-align: left;\">Unlimited switch sessions; constrained only by the number of physical links tapped and packet broker ports.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Oversubscription &amp; Packet Drop Risk<\/strong><\/td>\n<td style=\"text-align: left;\">High risk during microbursts when aggregating multiple ports; drops mirrored packets first.<\/td>\n<td style=\"text-align: left;\">High risk; competes with trunk link utilization and requires flood-forwarding inside the RSPAN VLAN.<\/td>\n<td style=\"text-align: left;\">Moderate to high risk; adds GRE\/IP header overhead (requires MTU planning) and consumes router\/switch CPU or ASIC resources.<\/td>\n<td style=\"text-align: left;\">Zero packet drops; copies 100% of full-duplex wire-speed traffic in real time.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Layer 1 &amp; Corrupted Frame Visibility<\/strong><\/td>\n<td style=\"text-align: left;\">Drops physical layer errors, runt frames, and bad FCS\/CRC packets at the ingress ASIC before mirroring.<\/td>\n<td style=\"text-align: left;\">Drops corrupted Layer 1\/Layer 2 frames at ingress prior to RSPAN VLAN tagging.<\/td>\n<td style=\"text-align: left;\">Drops corrupted frames at ingress prior to GRE encapsulation.<\/td>\n<td style=\"text-align: left;\">Passes malformed frames, CRC errors, and physical layer anomalies directly to the analyzer (passive TAPs).<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>802.1Q Tag Preservation<\/strong><\/td>\n<td style=\"text-align: left;\">Preserved only when <code>encapsulation replicate<\/code> is explicitly configured.<\/td>\n<td style=\"text-align: left;\">Overwrites original VLAN tag with the RSPAN VLAN ID.<\/td>\n<td style=\"text-align: left;\">Preserves original 802.1Q tag inside the encapsulated GRE payload.<\/td>\n<td style=\"text-align: left;\">Exact bit-for-bit duplicate of all Layer 2 headers and tags.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Deployment Cost &amp; Impact<\/strong><\/td>\n<td style=\"text-align: left;\">Zero hardware cost; configured instantaneously via CLI with no link downtime.<\/td>\n<td style=\"text-align: left;\">Zero hardware cost; requires VLAN pruning and STP configuration across intermediate trunks.<\/td>\n<td style=\"text-align: left;\">Zero hardware cost; requires IP reachability and MTU adjustments across routed paths.<\/td>\n<td style=\"text-align: left;\">Requires capital expenditure per link and a brief maintenance window to cable inline.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_Official_Documentation_and_Command_Reference_Resources\"><\/span>Cisco Official Documentation and Command Reference Resources<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Switched Port Analyzer (SPAN) implementation details, ASIC buffer allocations, and maximum concurrent session limits vary by switch family and software train. Refer to the following official Cisco documentation manuals and command references for platform-specific specifications:<\/p>\n<ul>\n<li><strong>Cisco Catalyst 9000 Series (Cisco IOS-XE)<\/strong>:<\/li>\n<li><em>Manual Title<\/em>: <strong>Network Management Configuration Guide, Cisco IOS XE [Release] (Catalyst 9200 \/ 9300 \/ 9400 \/ 9500 \/ 9600 Switches)<\/strong><\/li>\n<li><em>Section<\/em>: <em>Configuring SPAN and RSPAN<\/em> and <em>Configuring ERSPAN<\/em><\/li>\n<li><em>Scope<\/em>: Defines platform-specific active session limits per Unified Access Data Plane (UADP) or Silicon One ASIC, Port-Channel source\/destination support, and FNF (Flexible NetFlow) interaction rules.<\/li>\n<li><strong>Cisco Classic Catalyst 2960-X \/ 3650 \/ 3850 Series (Cisco IOS \/ IOS-XE)<\/strong>:<\/li>\n<li><em>Manual Title<\/em>: <strong>Catalyst [Model] Switch Software Configuration Guide \u2013 Configuring SPAN and RSPAN<\/strong><\/li>\n<li><em>Scope<\/em>: Details cross-stack SPAN behavior (StackWise), ingress forwarding parameters (<code>ingress encapsulation<\/code>), and VLAN filter restrictions.<\/li>\n<li><strong>Cisco IOS Master Command Reference<\/strong>:<\/li>\n<li><em>Manual Title<\/em>: <strong>Cisco IOS Interface and Hardware Component Command Reference \/ Network Management Command Reference<\/strong><\/li>\n<li><em>Key Commands Documented<\/em>: <code>monitor session source<\/code>, <code>monitor session destination<\/code>, <code>monitor session filter vlan<\/code>, and <code>show monitor<\/code>.<\/li>\n<li><strong>Cisco Nexus 9000 and 7000 Series (Cisco NX-OS)<\/strong>:<\/li>\n<li><em>Manual Title<\/em>: <strong>Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release [Version]<\/strong><\/li>\n<li><em>Section<\/em>: <em>Configuring SPAN<\/em>, <em>Configuring ERSPAN<\/em>, and <em>SPAN-on-Drop \/ Cloud Scale ASIC Guidelines<\/em><\/li>\n<li><em>Command Reference<\/em>: <strong>Cisco Nexus 9000 Series NX-OS System Management Command Reference<\/strong> (covers <code>monitor session<\/code>, <code>switchport monitor<\/code>, <code>erspan-id<\/code>, and <code>show monitor session<\/code>).<\/li>\n<\/ul>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Checking a SPAN port on a Cisco switch begins with <code>show monitor session all<\/code> on Catalyst IOS\/IOS-XE or <code>show monitor<\/code> on Nexus NX-OS to verify source directions, destination bindings, and encapsulation modes. Pairing session output with interface status checks (<code>show interfaces status<\/code>) and outbound drop counters ensures that your destination port is not only in the expected <code>monitoring<\/code> state, but also delivering complete, unthrottled packet captures to your analysis tools.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-check-span-port-on-cisco-switch_24631.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Check+SPAN+Port+on+Cisco+Switch+https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\",\"How to Check SPAN Port on Cisco Switch\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Verifying whether a Switched Port Analyzer (SPAN) session is active\u2014and confirming which interfaces are acting as traffic sources or capture destinations\u2014is a routine requirement during network troubleshooting, security auditing, and packet analysis. Because a SPAN destination port behaves differently from standard switching ports, checking its configuration only through basic interface counters can easily lead to&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Check SPAN Port on Cisco Switch - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Check SPAN Port on Cisco Switch - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"Verifying whether a Switched Port Analyzer (SPAN) session is active\u2014and confirming which interfaces are acting as traffic sources or capture destinations\u2014is a routine requirement during network troubleshooting, security auditing, and packet analysis. Because a SPAN destination port behaves differently from standard switching ports, checking its configuration only through basic interface counters can easily lead to... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-18T01:46:47+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"12 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\",\"name\":\"How to Check SPAN Port on Cisco Switch - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-18T01:46:47+00:00\",\"dateModified\":\"2026-11-18T01:46:47+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Check SPAN Port on Cisco Switch\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Check SPAN Port on Cisco Switch\",\"datePublished\":\"2026-11-18T01:46:47+00:00\",\"dateModified\":\"2026-11-18T01:46:47+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#webpage\"},\"wordCount\":1851,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Check SPAN Port on Cisco Switch - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html","og_locale":"en_US","og_type":"article","og_title":"How to Check SPAN Port on Cisco Switch - SPOTO Official Blog","og_description":"Verifying whether a Switched Port Analyzer (SPAN) session is active\u2014and confirming which interfaces are acting as traffic sources or capture destinations\u2014is a routine requirement during network troubleshooting, security auditing, and packet analysis. Because a SPAN destination port behaves differently from standard switching ports, checking its configuration only through basic interface counters can easily lead to... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-18T01:46:47+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"12 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html","name":"How to Check SPAN Port on Cisco Switch - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-18T01:46:47+00:00","dateModified":"2026-11-18T01:46:47+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Check SPAN Port on Cisco Switch"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Check SPAN Port on Cisco Switch","datePublished":"2026-11-18T01:46:47+00:00","dateModified":"2026-11-18T01:46:47+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#webpage"},"wordCount":1851,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-span-port-on-cisco-switch_24631.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24631"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24631"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24631\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24631"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24631"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24631"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}