{"id":24629,"date":"2026-11-18T09:39:04","date_gmt":"2026-11-18T01:39:04","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html"},"modified":"2026-11-18T09:39:04","modified_gmt":"2026-11-18T01:39:04","slug":"how-to-check-sfp-type-in-cisco","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html","title":{"rendered":"How to Check SFP Type in Cisco"},"content":{"rendered":"<p>Identifying the exact Small Form-Factor Pluggable (SFP) transceivers installed in your Cisco switches and routers is a routine requirement for capacity planning, fiber troubleshooting, and hardware audits. Without physically pulling optics from live ports\u2014which causes link flaps and network downtime\u2014you can inspect media types, Cisco Product IDs (PIDs), serial numbers, and real-time optical power levels directly from the command-line interface (CLI).<\/p>\n<p>This guide walks through the exact CLI commands to check SFP types in Cisco IOS and IOS-XE, how to inspect Digital Optical Monitoring (DOM) telemetry, how command syntax differs across NX-OS and IOS-XR, how to verify part numbers against Cisco&#8217;s official compatibility tools, and how to resolve unrecognized module errors or automate audits across an entire network fleet.<\/p>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Step-by-Step_Guide_to_Checking_SFP_Type_and_Serial_Number_in_Cisco_IOS\" title=\"Step-by-Step Guide to Checking SFP Type and Serial Number in Cisco IOS\">Step-by-Step Guide to Checking SFP Type and Serial Number in Cisco IOS<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Step_1_Check_the_Active_Media_Type_with_show_interfaces_status\" title=\"Step 1: Check the Active Media Type with show interfaces status\">Step 1: Check the Active Media Type with show interfaces status<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Step_2_Retrieve_the_Exact_PID_and_Serial_Number_with_show_inventory\" title=\"Step 2: Retrieve the Exact PID and Serial Number with show inventory\">Step 2: Retrieve the Exact PID and Serial Number with show inventory<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Step_3_Inspect_Raw_EEPROM_Attributes_with_show_idprom_interface\" title=\"Step 3: Inspect Raw EEPROM Attributes with show idprom interface\">Step 3: Inspect Raw EEPROM Attributes with show idprom interface<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#How_to_Check_Optical_Power_Levels_and_DOM_Telemetry\" title=\"How to Check Optical Power Levels and DOM Telemetry\">How to Check Optical Power Levels and DOM Telemetry<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Step_1_Confirm_the_SFP_Supports_DOM\" title=\"Step 1: Confirm the SFP Supports DOM\">Step 1: Confirm the SFP Supports DOM<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Step_2_View_Summary_Optical_Metrics_Across_Interfaces\" title=\"Step 2: View Summary Optical Metrics Across Interfaces\">Step 2: View Summary Optical Metrics Across Interfaces<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Step_3_Inspect_Detailed_Thresholds_with_show_interfaces_transceiver_detail\" title=\"Step 3: Inspect Detailed Thresholds with show interfaces transceiver detail\">Step 3: Inspect Detailed Thresholds with show interfaces transceiver detail<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Step_4_Interpret_the_Diagnostic_Values\" title=\"Step 4: Interpret the Diagnostic Values\">Step 4: Interpret the Diagnostic Values<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#SFP_Check_Commands_Across_Cisco_IOS_NX-OS_and_IOS-XR\" title=\"SFP Check Commands Across Cisco IOS, NX-OS, and IOS-XR\">SFP Check Commands Across Cisco IOS, NX-OS, and IOS-XR<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Cisco_TMG_Compatibility_Matrix_and_Transceiver_PID_Reference\" title=\"Cisco TMG Compatibility Matrix and Transceiver PID Reference\">Cisco TMG Compatibility Matrix and Transceiver PID Reference<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Cisco_Transceiver_Module_Group_TMG_Compatibility_Matrix\" title=\"Cisco Transceiver Module Group (TMG) Compatibility Matrix\">Cisco Transceiver Module Group (TMG) Compatibility Matrix<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Common_Cisco_SFP_and_SFP_PID_Nomenclature\" title=\"Common Cisco SFP and SFP+ PID Nomenclature\">Common Cisco SFP and SFP+ PID Nomenclature<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Troubleshooting_Unknown_or_Unsupported_Transceiver_Errors\" title=\"Troubleshooting &#8220;Unknown&#8221; or &#8220;Unsupported Transceiver&#8221; Errors\">Troubleshooting &#8220;Unknown&#8221; or &#8220;Unsupported Transceiver&#8221; Errors<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Why_does_show_interfaces_status_show_unknown_or_unrecognized_for_the_SFP_type\" title=\"Why does show interfaces status show unknown or unrecognized for the SFP type?\">Why does show interfaces status show unknown or unrecognized for the SFP type?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#How_do_I_fix_PHY-4-UNSUPPORTED_TRANSCEIVER_and_err-disabled_gbic-invalid\" title=\"How do I fix %PHY-4-UNSUPPORTED_TRANSCEIVER and err-disabled (gbic-invalid)?\">How do I fix %PHY-4-UNSUPPORTED_TRANSCEIVER and err-disabled (gbic-invalid)?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Why_does_show_interfaces_transceiver_return_nothing_or_NA_on_a_working_SFP\" title=\"Why does show interfaces transceiver return nothing or N\/A on a working SFP?\">Why does show interfaces transceiver return nothing or N\/A on a working SFP?<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Automating_Bulk_SFP_Audits_via_SNMP_and_Ansible\" title=\"Automating Bulk SFP Audits via SNMP and Ansible\">Automating Bulk SFP Audits via SNMP and Ansible<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Option_1_SNMP_ENTITY-MIB_OID_Template\" title=\"Option 1: SNMP ENTITY-MIB OID Template\">Option 1: SNMP ENTITY-MIB OID Template<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Option_2_Ansible_Playbook_to_Export_SFP_Inventory_to_CSV\" title=\"Option 2: Ansible Playbook to Export SFP Inventory to CSV\">Option 2: Ansible Playbook to Export SFP Inventory to CSV<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-21\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Step-by-Step_Guide_to_Checking_SFP_Type_and_Serial_Number_in_Cisco_IOS\"><\/span>Step-by-Step Guide to Checking SFP Type and Serial Number in Cisco IOS<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When working on Cisco Catalyst switches or ISR\/ASR routers running Cisco IOS or IOS-XE, three primary CLI commands provide progressively deeper visibility into your installed transceivers\u2014ranging from basic media classification to raw EEPROM vendor data.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Check_the_Active_Media_Type_with_show_interfaces_status\"><\/span>Step 1: Check the Active Media Type with <code>show interfaces status<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To quickly see the optical or copper standard operating on each port without sifting through detailed hardware logs, run <code>show interfaces status<\/code>. Focus on the <strong>Type<\/strong> column on the far right:<\/p>\n<pre><code class=\"language-text\">Switch# show interfaces status\n\nPort         Name               Status       Vlan       Duplex  Speed Type\nGi1\/0\/1      Uplink_Core_01     connected    trunk      a-full  a-1000 1000BaseSX SFP\nGi1\/0\/2      Uplink_Core_02     connected    trunk      a-full  a-1000 1000BaseLX SFP\nGi1\/0\/3      Backup_Link        notconnect   1          auto    auto   No Transceiver\nTe1\/1\/1      Wan_Edge           connected    routed     full    10G    SFP-10GBase-LR\n<\/code><\/pre>\n<ul>\n<li><strong>What it solves:<\/strong> Instantly confirms whether a slot is populated (<code>No Transceiver<\/code> vs. an active module) and identifies the IEEE physical layer specification (such as <code>1000BaseSX<\/code>, <code>1000BaseLX<\/code>, or <code>SFP-10GBase-LR<\/code>).<\/li>\n<li><strong>Limitation:<\/strong> It does not display the exact orderable Cisco part number or hardware serial number.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Retrieve_the_Exact_PID_and_Serial_Number_with_show_inventory\"><\/span>Step 2: Retrieve the Exact PID and Serial Number with <code>show inventory<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To obtain the orderable Cisco Product ID (PID), Version ID (VID), and factory Serial Number (SN) required for RMA replacements or asset tracking, run <code>show inventory<\/code>:<\/p>\n<pre><code class=\"language-text\">Switch# show inventory\n\nNAME: &quot;Switch 1&quot;, DESCR: &quot;Cisco Catalyst 9300 48-port data only&quot;\nPID: C9300-48T         , VID: V02  , SN: FCW2211G0AB\n\nNAME: &quot;Gi1\/0\/1&quot;, DESCR: &quot;1000BaseSX SFP&quot;\nPID: GLC-SX-MMD        , VID: V01  , SN: FNS1928104B\n\nNAME: &quot;Te1\/1\/1&quot;, DESCR: &quot;SFP-10GBase-LR&quot;\nPID: SFP-10G-LR-S      , VID: V01  , SN: AVD2104X991\n<\/code><\/pre>\n<ul>\n<li><strong>Tip:<\/strong> On high-density chassis switches, filter the output for a specific interface by piping the command: <code>show inventory | section Gi1\/0\/1<\/code> or <code>show inventory | include Gi1\/0\/1|PID<\/code>.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Inspect_Raw_EEPROM_Attributes_with_show_idprom_interface\"><\/span>Step 3: Inspect Raw EEPROM Attributes with <code>show idprom interface<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If you need deeper physical specifications\u2014such as laser wavelength, connector type, or original manufacturer metadata burned into the transceiver&#8217;s internal EEPROM (IDPROM)\u2014use <code>show idprom interface &lt;interface-id&gt;<\/code>:<\/p>\n<pre><code class=\"language-text\">Switch# show idprom interface gigabitEthernet 1\/0\/1\n\nGeneral SFP Information\n-----------------------------------------------\nIdentifier            : 0x03 (SFP\/SFP+\/SFP28)\nConnector             : 0x07 (LC)\nTransceiver           : 1000BASE_SX (0x01)\nEncoding              : 0x01 (8B10B)\nBR, Nominal           : 1300 Mbps\nVendor Name           : CISCO-FINISAR\nVendor Part Number    : FTLF8519P3BNL-C6\nVendor Revision       : A\nVendor Serial Number  : FNS1928104B\nCisco Part Number     : 10-2626-01\nCisco Product ID      : GLC-SX-MMD\nLaser Wavelength      : 850 nm\n<\/code><\/pre>\n<ul>\n<li><strong>Alternative on select Catalyst platforms:<\/strong> If <code>show idprom<\/code> is unavailable on your specific IOS-XE release, run <code>show controllers ethernet-controller &lt;interface-id&gt; phy<\/code> to extract the same vendor EEPROM registers.<\/li>\n<\/ul>\n<p><strong>Key Takeaway:<\/strong> Use <code>show interfaces status<\/code> for rapid media identification, <code>show inventory<\/code> for asset PIDs and serial numbers, and <code>show idprom interface<\/code> for granular wavelength and OEM hardware attributes.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Check_Optical_Power_Levels_and_DOM_Telemetry\"><\/span>How to Check Optical Power Levels and DOM Telemetry<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Once you have confirmed the physical SFP type installed in a port, the next logical step during link troubleshooting is verifying whether the laser is transmitting and receiving light within specification via Digital Optical Monitoring (DOM).<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Confirm_the_SFP_Supports_DOM\"><\/span>Step 1: Confirm the SFP Supports DOM<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Not all legacy transceivers contain internal diagnostic sensors. Using the PID gathered from <code>show inventory<\/code> above, verify that the module supports DOM\u2014typically indicated by a <strong><code>D<\/code><\/strong> suffix on 1G modules (e.g., <code>GLC-SX-MMD<\/code>, <code>GLC-LH-SMD<\/code>) or built natively into modern 10G\/25G <code>SFP+<\/code> and <code>SFP28<\/code> modules.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_View_Summary_Optical_Metrics_Across_Interfaces\"><\/span>Step 2: View Summary Optical Metrics Across Interfaces<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Run <code>show interfaces transceiver<\/code> to view a concise table of real-time temperature, voltage, bias current, transmit (Tx) power, and receive (Rx) power across all DOM-capable ports:<\/p>\n<pre><code class=\"language-text\">Switch# show interfaces transceiver\n\nIf device is externally calibrated, only calibrated values are printed.\n++ : high alarm, + : high warning, - : low warning, -- : low alarm.\nNA or N\/A: not applicable, Tx: transmit, Rx: receive.\n\n                                 Optical   Optical\n           Temperature  Voltage  Current   Tx Power  Rx Power\nPort       (Celsius)    (Volts)  (mA)      (dBm)     (dBm)\n---------  -----------  -------  --------  --------  --------\nGi1\/0\/1      34.2       3.29      6.1      -5.1      -5.8\nTe1\/1\/1      41.8       3.31     32.4      -2.3     -15.4 -\n<\/code><\/pre>\n<p>Notice the <code>-<\/code> flag next to <code>Te1\/1\/1<\/code>&#8216;s Rx Power (<code>-15.4 dBm<\/code>), which immediately alerts you to a low-warning receive power condition caused by fiber attenuation or dirty patch cords.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Inspect_Detailed_Thresholds_with_show_interfaces_transceiver_detail\"><\/span>Step 3: Inspect Detailed Thresholds with <code>show interfaces transceiver detail<\/code><span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To compare live optical readings against the module&#8217;s factory-programmed High\/Low Alarm and Warning thresholds, append the <code>detail<\/code> keyword for a specific interface:<\/p>\n<pre><code class=\"language-text\">Switch# show interfaces tengigabitethernet 1\/1\/1 transceiver detail\n\nITU Channel not available (Wavelength not available),\nTransceiver is internally calibrated.\nmA: milliamperes, dBm: decibels (milliwatts), NA or N\/A: not applicable.\n++ : high alarm, + : high warning, - : low warning, -- : low alarm.\n\n                                 High Alarm  High Warn  Low Warn   Low Alarm\n          Temperature   Threshold   Threshold  Threshold  Threshold\nPort       (Celsius)    (Celsius)   (Celsius)  (Celsius)  (Celsius)\n--------- ------------------  ----------  ---------  ---------  ---------\nTe1\/1\/1      41.8          75.0        70.0        0.0       -5.0\n\n                                 High Alarm  High Warn  Low Warn   Low Alarm\n           Optical      Threshold   Threshold  Threshold  Threshold\nPort       Rx Power     (dBm)       (dBm)      (dBm)      (dBm)\n--------- ------------------  ----------  ---------  ---------  ---------\nTe1\/1\/1     -15.4 -         0.5        -1.0      -14.4      -18.4\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Interpret_the_Diagnostic_Values\"><\/span>Step 4: Interpret the Diagnostic Values<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Optical Tx Power (dBm):<\/strong> Measures the laser output leaving the local switch. If Tx power falls below the Low Alarm threshold, the local SFP transceiver is failing and must be replaced.<\/li>\n<li><strong>Optical Rx Power (dBm):<\/strong> Measures incoming light from the remote device. If Rx power is marked with <code>-<\/code> (low warning) or <code>--<\/code> (low alarm) while the remote device&#8217;s Tx power is normal, inspect the fiber path for excessive bends, faulty splices, or contaminated LC connectors. On short runs with long-range optics (e.g., <code>SFP-10G-ZR<\/code>), Rx power marked with <code>+<\/code> or <code>++<\/code> indicates optical overload requiring an inline optical attenuator.<\/li>\n<\/ul>\n<p><strong>Key Takeaway:<\/strong> Always pair <code>show interfaces &lt;interface&gt; transceiver detail<\/code> with threshold markers (<code>++<\/code>, <code>+<\/code>, <code>-<\/code>, <code>--<\/code>) to isolate whether a link issue stems from a degraded local SFP or high loss along the physical fiber plant.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"SFP_Check_Commands_Across_Cisco_IOS_NX-OS_and_IOS-XR\"><\/span>SFP Check Commands Across Cisco IOS, NX-OS, and IOS-XR<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>While Cisco IOS and IOS-XE share the commands covered above, data center switches running <strong>Cisco NX-OS<\/strong> (Nexus series) and service provider routers running <strong>Cisco IOS-XR<\/strong> (ASR 9000, NCS series) use different syntax structures. Use the comparison table below to translate SFP inspection commands across platforms.<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Inspection Task<\/th>\n<th style=\"text-align: left;\">Cisco IOS \/ IOS-XE (Catalyst, ISR\/ASR 1000)<\/th>\n<th style=\"text-align: left;\">Cisco NX-OS (Nexus 9000, 7000, 5000, 3000)<\/th>\n<th style=\"text-align: left;\">Cisco IOS-XR (ASR 9000, NCS 5500\/540)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><strong>Quick Media Type Summary<\/strong><\/td>\n<td style=\"text-align: left;\"><code>show interfaces status<\/code><\/td>\n<td style=\"text-align: left;\"><code>show interface status<\/code> or <code>show interface brief<\/code><\/td>\n<td style=\"text-align: left;\"><code>show interfaces brief<\/code><\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Hardware PID &amp; Serial Number<\/strong><\/td>\n<td style=\"text-align: left;\"><code>show inventory<\/code><\/td>\n<td style=\"text-align: left;\"><code>show inventory<\/code> or <code>show interface &lt;intf&gt; transceiver<\/code><\/td>\n<td style=\"text-align: left;\"><code>show inventory<\/code> or <code>admin show inventory<\/code><\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Detailed Transceiver EEPROM \/ Vendor Info<\/strong><\/td>\n<td style=\"text-align: left;\"><code>show idprom interface &lt;intf&gt;<\/code><\/td>\n<td style=\"text-align: left;\"><code>show interface &lt;intf&gt; transceiver details<\/code><\/td>\n<td style=\"text-align: left;\"><code>show controllers &lt;intf&gt; phy<\/code><\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>DOM Optical Power &amp; Thresholds<\/strong><\/td>\n<td style=\"text-align: left;\"><code>show interfaces &lt;intf&gt; transceiver detail<\/code><\/td>\n<td style=\"text-align: left;\"><code>show interface &lt;intf&gt; transceiver details<\/code><\/td>\n<td style=\"text-align: left;\"><code>show controllers &lt;intf&gt; phy<\/code><\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Transceiver Calibration Data<\/strong><\/td>\n<td style=\"text-align: left;\">Included in <code>transceiver detail<\/code> output<\/td>\n<td style=\"text-align: left;\"><code>show interface &lt;intf&gt; transceiver calibrations<\/code><\/td>\n<td style=\"text-align: left;\">Included in <code>show controllers &lt;intf&gt; phy<\/code><\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Verify Port Speed &amp; Capabilities<\/strong><\/td>\n<td style=\"text-align: left;\"><code>show interfaces &lt;intf&gt; capabilities<\/code><\/td>\n<td style=\"text-align: left;\"><code>show interface &lt;intf&gt; capabilities<\/code><\/td>\n<td style=\"text-align: left;\"><code>show controllers &lt;intf&gt; all<\/code><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><strong>Key Takeaway:<\/strong> On Nexus (NX-OS), <code>show interface &lt;intf&gt; transceiver details<\/code> consolidates hardware inventory, vendor EEPROM, and DOM power levels into a single command, whereas IOS-XR centralizes physical-layer and optical telemetry under <code>show controllers &lt;intf&gt; phy<\/code>.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_TMG_Compatibility_Matrix_and_Transceiver_PID_Reference\"><\/span>Cisco TMG Compatibility Matrix and Transceiver PID Reference<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Once you extract a Cisco Product ID (PID) from the CLI, you can verify its physical reach, wavelength, and platform support using Cisco&#8217;s official hardware documentation.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Cisco_Transceiver_Module_Group_TMG_Compatibility_Matrix\"><\/span>Cisco Transceiver Module Group (TMG) Compatibility Matrix<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>The <strong>Cisco Transceiver Module Group (TMG) Compatibility Matrix<\/strong> (<code>https:\/\/tmgmatrix.cisco.com<\/code>) is Cisco&#8217;s authoritative database mapping transceiver PIDs to supported switch\/router models, line cards, and minimum required OS versions.<\/p>\n<ul>\n<li><strong>Lookup Parameters:<\/strong> Query by Transceiver Product ID (e.g., <code>GLC-SX-MMD<\/code>), Form Factor (<code>SFP<\/code>, <code>SFP+<\/code>, <code>SFP28<\/code>, <code>QSFP28<\/code>), or Host Platform Series (e.g., <code>Catalyst 9300<\/code>).<\/li>\n<li><strong>Returned Specifications:<\/strong> Minimum software release (IOS-XE, NX-OS, IOS-XR), DOM support status, operating temperature range, cable type, core size, modal bandwidth, and maximum reach.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Common_Cisco_SFP_and_SFP_PID_Nomenclature\"><\/span>Common Cisco SFP and SFP+ PID Nomenclature<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Use the reference specifications below to decode the most common transceiver PIDs returned by <code>show inventory<\/code>:<\/p>\n<ul>\n<li><strong><code>GLC-SX-MMD<\/code> (1000BASE-SX):<\/strong><\/li>\n<li><strong>Media &amp; Wavelength:<\/strong> Multimode Fiber (MMF), 850 nm.<\/li>\n<li><strong>Maximum Reach:<\/strong> 550 m on OM2\/OM3\/OM4 (275 m on FDDI\/OM1).<\/li>\n<li><strong>Attributes:<\/strong> LC duplex connector, Extended temperature (<code>-5\u00b0C to 85\u00b0C<\/code>), DOM enabled (<code>D<\/code>).<\/li>\n<li><strong><code>GLC-LH-SMD<\/code> (1000BASE-LX\/LH):<\/strong><\/li>\n<li><strong>Media &amp; Wavelength:<\/strong> Single-Mode Fiber (SMF) or MMF (with mode-conditioning patch cord), 1310 nm.<\/li>\n<li><strong>Maximum Reach:<\/strong> 10 km over SMF (550 m over MMF).<\/li>\n<li><strong>Attributes:<\/strong> LC duplex connector, Extended temperature, DOM enabled.<\/li>\n<li><strong><code>GLC-ZX-SMD<\/code> (1000BASE-ZX):<\/strong><\/li>\n<li><strong>Media &amp; Wavelength:<\/strong> Single-Mode Fiber (SMF), 1550 nm.<\/li>\n<li><strong>Maximum Reach:<\/strong> Approximately 70 km to 100 km depending on link loss budget.<\/li>\n<li><strong>Attributes:<\/strong> LC duplex connector, DOM enabled.<\/li>\n<li><strong><code>GLC-TE<\/code> \/ <code>GLC-T<\/code> (1000BASE-T):<\/strong><\/li>\n<li><strong>Media &amp; Wavelength:<\/strong> Category 5e\/6 unshielded twisted-pair copper cable.<\/li>\n<li><strong>Maximum Reach:<\/strong> 100 m.<\/li>\n<li><strong>Attributes:<\/strong> RJ-45 connector, Extended temperature (<code>GLC-TE<\/code>), no optical DOM.<\/li>\n<li><strong><code>SFP-10G-SR<\/code> \/ <code>SFP-10G-SR-S<\/code> (10GBASE-SR):<\/strong><\/li>\n<li><strong>Media &amp; Wavelength:<\/strong> Multimode Fiber (MMF), 850 nm.<\/li>\n<li><strong>Maximum Reach:<\/strong> 300 m on OM3, 400 m on OM4.<\/li>\n<li><strong>Attributes:<\/strong> SFP+ form factor, DOM enabled (<code>-S<\/code> denotes S-Class enterprise version without OTN\/WAN-PHY features).<\/li>\n<li><strong><code>SFP-10G-LR<\/code> \/ <code>SFP-10G-LR-S<\/code> (10GBASE-LR):<\/strong><\/li>\n<li><strong>Media &amp; Wavelength:<\/strong> Single-Mode Fiber (SMF), 1310 nm.<\/li>\n<li><strong>Maximum Reach:<\/strong> 10 km.<\/li>\n<li><strong>Attributes:<\/strong> SFP+ form factor, DOM enabled.<\/li>\n<\/ul>\n<p><strong>Key Takeaway:<\/strong> Always cross-reference the PID found in <code>show inventory<\/code> against the Cisco TMG Compatibility Matrix before migrating optics between chassis to ensure the target line card and software release support that specific module revision.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Troubleshooting_Unknown_or_Unsupported_Transceiver_Errors\"><\/span>Troubleshooting &#8220;Unknown&#8221; or &#8220;Unsupported Transceiver&#8221; Errors<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When checking SFP types in the CLI, you may encounter ports showing <code>unknown<\/code> in the Type column, missing DOM metrics, or interfaces shut down in an <code>err-disabled (gbic-invalid)<\/code> state. Below are solutions to the most common transceiver recognition problems.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Why_does_show_interfaces_status_show_unknown_or_unrecognized_for_the_SFP_type\"><\/span>Why does <code>show interfaces status<\/code> show <code>unknown<\/code> or <code>unrecognized<\/code> for the SFP type?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>An <code>unknown<\/code> or <code>unrecognized<\/code> media type typically occurs for one of three reasons:<br \/>\n1. <strong>Software Version Mismatch:<\/strong> The installed Cisco IOS\/IOS-XE release predates the release of a newer SFP hardware revision (for example, inserting an <code>SFP-10G-SR-S<\/code> or <code>GLC-TE<\/code> into an older switch running legacy code). Upgrade the switch software according to the TMG Matrix.<br \/>\n2. <strong>Speed Mismatch on Multi-Rate Ports:<\/strong> Inserting a 1G SFP into a 10G\/25G uplink port may require manual speed configuration (<code>speed 1000<\/code> or <code>speed nonegotiate<\/code>) before the port initializes the transceiver properly.<br \/>\n3. <strong>Corrupted EEPROM or Physical Seating Issue:<\/strong> Reseat the transceiver and inspect the gold edge connector Inside the SFP cage for dust or bent pins.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"How_do_I_fix_PHY-4-UNSUPPORTED_TRANSCEIVER_and_err-disabled_gbic-invalid\"><\/span>How do I fix <code>%PHY-4-UNSUPPORTED_TRANSCEIVER<\/code> and <code>err-disabled (gbic-invalid)<\/code>?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>When you insert a third-party or non-Cisco coded SFP, the switch validates the cryptographic checksum stored in the transceiver&#8217;s EEPROM. If validation fails, the switch logs <code>%GBIC_SECURITY_CRYPT-4-VN_DATA_CRC_ERROR<\/code> or <code>%PHY-4-UNSUPPORTED_TRANSCEIVER<\/code> and places the port into an <code>err-disabled<\/code> state.<\/p>\n<p>To bypass this check and bring the interface online, enter the following undirected (hidden) commands in global configuration mode:<\/p>\n<pre><code class=\"language-text\">Switch# configure terminal\nSwitch(config)# service unsupported-transceiver\n  Warning: When Cisco determines that a fault or defect can be traced to\n  the use of third-party transceivers installed by a customer or reseller,\n  then, at Cisco's discretion, Cisco may withhold support under warranty or\n  a Cisco support program.\nSwitch(config)# no errdisable detect cause gbic-invalid\nSwitch(config)# interface gigabitEthernet 1\/0\/1\nSwitch(config-if)# shutdown\nSwitch(config-if)# no shutdown\nSwitch(config-if)# end\n<\/code><\/pre>\n<p><em>Note:<\/em> The command <code>service unsupported-transceiver<\/code> does not support Tab auto-completion in the CLI; you must type the entire command manually.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Why_does_show_interfaces_transceiver_return_nothing_or_NA_on_a_working_SFP\"><\/span>Why does <code>show interfaces transceiver<\/code> return nothing or <code>N\/A<\/code> on a working SFP?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If a port is up and passing traffic, but optical power output is blank or shows <code>N\/A<\/code>:<br \/>\n* Verify the PID is not a non-DOM variant (such as the older <code>GLC-SX-MM<\/code> or <code>GLC-LH-SM<\/code>).<br \/>\n* On certain Catalyst platforms, DOM polling is disabled by default to conserve CPU cycles. Enable it globally with:<br \/>\n  <code>text<br \/>\n  Switch(config)# transceiver type all<br \/>\n  Switch(config-xcvr-type)# monitoring<br \/>\n  Switch(config-xcvr-type)# monitoring interval 300<\/code><\/p>\n<p><strong>Key Takeaway:<\/strong> While <code>service unsupported-transceiver<\/code> and <code>no errdisable detect cause gbic-invalid<\/code> allow third-party optics to link up and report their EEPROM types, Cisco TAC may require you to reproduce physical-layer issues using genuine Cisco optics before opening a hardware RMA.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Automating_Bulk_SFP_Audits_via_SNMP_and_Ansible\"><\/span>Automating Bulk SFP Audits via SNMP and Ansible<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Logging into switches one by one to run <code>show inventory<\/code> is impractical across large enterprise networks. Use the SNMP OID template or the Ansible playbook below to extract and export SFP transceiver inventories across your entire Cisco fleet.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Option_1_SNMP_ENTITY-MIB_OID_Template\"><\/span>Option 1: SNMP <code>ENTITY-MIB<\/code> OID Template<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Cisco switches expose installed SFP modules as physical entities within the standard <code>ENTITY-MIB<\/code> (<code>1.3.6.1.2.1.47<\/code>). Query these four OIDs using <code>snmpwalk<\/code> or your network monitoring system (NMS) to correlate port names with SFP part numbers and serial numbers:<\/p>\n<pre><code class=\"language-text\"># ENTITY-MIB Base OIDs for SFP Inventory\nentPhysicalDescr      : 1.3.6.1.2.1.47.1.1.1.1.2   # Media description (e.g., &quot;1000BaseSX SFP&quot;)\nentPhysicalName       : 1.3.6.1.2.1.47.1.1.1.1.7   # Interface name (e.g., &quot;Gi1\/0\/1&quot;)\nentPhysicalSerialNum  : 1.3.6.1.2.1.47.1.1.1.1.11  # Transceiver Serial Number\nentPhysicalModelName  : 1.3.6.1.2.1.47.1.1.1.1.13  # Cisco PID (e.g., &quot;GLC-SX-MMD&quot;)\n<\/code><\/pre>\n<p>Run the following shell one-liner to query all installed hardware PIDs from a target switch:<\/p>\n<pre><code class=\"language-bash\"># Replace &lt;COMMUNITY&gt; and &lt;SWITCH_IP&gt; with your SNMPv2c credentials or use SNMPv3 flags\nsnmpwalk -v2c -c &lt;COMMUNITY&gt; &lt;SWITCH_IP&gt; 1.3.6.1.2.1.47.1.1.1.1.13 | grep -E &quot;GLC-|SFP-|QSFP-&quot;\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Option_2_Ansible_Playbook_to_Export_SFP_Inventory_to_CSV\"><\/span>Option 2: Ansible Playbook to Export SFP Inventory to CSV<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Save the following playbook as <code>audit_cisco_sfp.yml<\/code>. It connects to all switches in your <code>[cisco_switches]<\/code> inventory group, executes <code>show inventory<\/code>, parses out SFP\/QSFP modules using regular expressions, and compiles a consolidated <code>sfp_inventory_report.csv<\/code> file:<\/p>\n<pre><code class=\"language-yaml\">---\n- name: Audit and Export Cisco SFP Transceiver Inventory\n  hosts: cisco_switches\n  gather_facts: no\n  connection: network_cli\n\n  vars:\n    csv_output_path: &quot;.\/sfp_inventory_report.csv&quot;\n\n  tasks:\n    - name: Initialize CSV header on localhost\n      ansible.builtin.copy:\n        content: &quot;Hostname,Interface_Name,Description,PID,Serial_Number\\n&quot;\n        dest: &quot;{{ csv_output_path }}&quot;\n      delegate_to: localhost\n      run_once: true\n\n    - name: Run show inventory on Cisco IOS\/IOS-XE devices\n      cisco.ios.ios_command:\n        commands:\n          - show inventory\n      register: inv_output\n\n    - name: Parse SFP entries and append to CSV\n      ansible.builtin.lineinfile:\n        path: &quot;{{ csv_output_path }}&quot;\n        line: &quot;{{ inventory_hostname }},{{ item.0 }},{{ item.1 }},{{ item.2 }},{{ item.3 }}&quot;\n        insertafter: EOF\n      delegate_to: localhost\n      loop: &quot;{{ inv_output.stdout[0] | regex_findall('NAME:\\\\s*\\&quot;((?:Gi|Te|TwentyFiveGigE|Fo|Hu|Ethernet)[^\\&quot;]+)\\&quot;,\\\\s*DESCR:\\\\s*\\&quot;([^\\&quot;]+)\\&quot;\\\\s*\\\\nPID:\\\\s*(\\\\S+)\\\\s*,\\\\s*VID:[^,]+,\\\\s*SN:\\\\s*(\\\\S+)') }}&quot;\n<\/code><\/pre>\n<p>Run the playbook from your control node:<\/p>\n<pre><code class=\"language-bash\">ansible-playbook -i hosts.ini audit_cisco_sfp.yml\n<\/code><\/pre>\n<p><strong>Key Takeaway:<\/strong> Polling <code>entPhysicalModelName<\/code> (<code>1.3.6.1.2.1.47.1.1.1.1.13<\/code>) via SNMP or parsing <code>show inventory<\/code> with Ansible eliminates manual CLI checks and keeps your transceiver asset database continuously updated.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Checking SFP types in Cisco environments starts with knowing which command matches your immediate diagnostic goal: <code>show interfaces status<\/code> for a rapid port-by-port media overview, <code>show inventory<\/code> for exact Cisco PIDs and serial numbers, and <code>show interfaces transceiver detail<\/code> (or its NX-OS and IOS-XR equivalents) for live optical health metrics. By combining these CLI checks with the Cisco TMG Compatibility Matrix and automated SNMP or Ansible collection, you can proactively validate hardware compatibility, isolate physical fiber issues in seconds, and maintain an accurate inventory across every switch in your network.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-check-sfp-type-in-cisco_24629.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Check+SFP+Type+in+Cisco+https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\",\"How to Check SFP Type in Cisco\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Identifying the exact Small Form-Factor Pluggable (SFP) transceivers installed in your Cisco switches and routers is a routine requirement for capacity planning, fiber troubleshooting, and hardware audits. Without physically pulling optics from live ports\u2014which causes link flaps and network downtime\u2014you can inspect media types, Cisco Product IDs (PIDs), serial numbers, and real-time optical power levels&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Check SFP Type in Cisco - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Check SFP Type in Cisco - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"Identifying the exact Small Form-Factor Pluggable (SFP) transceivers installed in your Cisco switches and routers is a routine requirement for capacity planning, fiber troubleshooting, and hardware audits. Without physically pulling optics from live ports\u2014which causes link flaps and network downtime\u2014you can inspect media types, Cisco Product IDs (PIDs), serial numbers, and real-time optical power levels... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-18T01:39:04+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"13 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\",\"name\":\"How to Check SFP Type in Cisco - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-18T01:39:04+00:00\",\"dateModified\":\"2026-11-18T01:39:04+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Check SFP Type in Cisco\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Check SFP Type in Cisco\",\"datePublished\":\"2026-11-18T01:39:04+00:00\",\"dateModified\":\"2026-11-18T01:39:04+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#webpage\"},\"wordCount\":1676,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Check SFP Type in Cisco - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html","og_locale":"en_US","og_type":"article","og_title":"How to Check SFP Type in Cisco - SPOTO Official Blog","og_description":"Identifying the exact Small Form-Factor Pluggable (SFP) transceivers installed in your Cisco switches and routers is a routine requirement for capacity planning, fiber troubleshooting, and hardware audits. Without physically pulling optics from live ports\u2014which causes link flaps and network downtime\u2014you can inspect media types, Cisco Product IDs (PIDs), serial numbers, and real-time optical power levels... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-18T01:39:04+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"13 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html","name":"How to Check SFP Type in Cisco - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-18T01:39:04+00:00","dateModified":"2026-11-18T01:39:04+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Check SFP Type in Cisco"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Check SFP Type in Cisco","datePublished":"2026-11-18T01:39:04+00:00","dateModified":"2026-11-18T01:39:04+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#webpage"},"wordCount":1676,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-sfp-type-in-cisco_24629.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24629"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24629"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24629\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24629"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24629"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24629"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}