{"id":24598,"date":"2026-11-17T17:16:58","date_gmt":"2026-11-17T09:16:58","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html"},"modified":"2026-11-17T17:16:58","modified_gmt":"2026-11-17T09:16:58","slug":"how-to-check-port-configuration-in-cisco-switch","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html","title":{"rendered":"How to Check Port Configuration in Cisco Switch"},"content":{"rendered":"<p>Inspecting port settings on a Cisco switch requires distinguishing between what an administrator has configured in memory and how the interface is currently operating on the physical network. Because Cisco IOS and IOS XE store user-defined parameters in the running configuration while tracking real-time link negotiation, VLAN tagging, and security states in separate operational tables, no single command shows every detail at once. Whether you are auditing a single access port, verifying an 802.1Q trunk, diagnosing a shutdown interface, or managing a switch through its web interface, choosing the right verification method ensures you get accurate port data quickly.<\/p>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Choosing_the_Right_Command_Administrative_Config_vs_Operational_Status\" title=\"Choosing the Right Command: Administrative Config vs. Operational Status\">Choosing the Right Command: Administrative Config vs. Operational Status<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Viewing_the_Running_Configuration_for_a_Specific_Port_or_Range\" title=\"Viewing the Running Configuration for a Specific Port or Range\">Viewing the Running Configuration for a Specific Port or Range<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#How_to_Verify_Port_VLANs_Trunking_and_Layer_2_Settings\" title=\"How to Verify Port VLANs, Trunking, and Layer 2 Settings\">How to Verify Port VLANs, Trunking, and Layer 2 Settings<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Step_1_Inspect_Detailed_Switchport_Parameters\" title=\"Step 1: Inspect Detailed Switchport Parameters\">Step 1: Inspect Detailed Switchport Parameters<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Step_2_Verify_Active_Trunk_Links_and_Forwarding_State\" title=\"Step 2: Verify Active Trunk Links and Forwarding State\">Step 2: Verify Active Trunk Links and Forwarding State<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Troubleshooting_Port_Security_and_Error-Disabled_Interfaces\" title=\"Troubleshooting Port Security and Error-Disabled Interfaces\">Troubleshooting Port Security and Error-Disabled Interfaces<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Step_1_Check_if_the_Port_Is_Error-Disabled\" title=\"Step 1: Check if the Port Is Error-Disabled\">Step 1: Check if the Port Is Error-Disabled<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Step_2_Verify_Port_Security_Settings_and_Violation_Counters\" title=\"Step 2: Verify Port Security Settings and Violation Counters\">Step 2: Verify Port Security Settings and Violation Counters<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Step_3_Audit_Learned_and_Sticky_MAC_Addresses\" title=\"Step 3: Audit Learned and Sticky MAC Addresses\">Step 3: Audit Learned and Sticky MAC Addresses<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Step_4_Check_Automatic_Recovery_Timers\" title=\"Step 4: Check Automatic Recovery Timers\">Step 4: Check Automatic Recovery Timers<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Checking_Cisco_Switch_Port_Configuration_via_the_Web_GUI\" title=\"Checking Cisco Switch Port Configuration via the Web GUI\">Checking Cisco Switch Port Configuration via the Web GUI<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Prerequisite_Connect_to_the_WebUI\" title=\"Prerequisite: Connect to the WebUI\">Prerequisite: Connect to the WebUI<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Method_A_Cisco_Catalyst_Switches_IOS_XE_WebUI\" title=\"Method A: Cisco Catalyst Switches (IOS XE WebUI)\">Method A: Cisco Catalyst Switches (IOS XE WebUI)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Method_B_Cisco_Business_and_SMB_Switches_CBS250350_Catalyst_12001300\" title=\"Method B: Cisco Business and SMB Switches (CBS250\/350 &amp; Catalyst 1200\/1300)\">Method B: Cisco Business and SMB Switches (CBS250\/350 &amp; Catalyst 1200\/1300)<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Cisco_IOS_Interface_Command_Reference_and_Official_Documentation\" title=\"Cisco IOS Interface Command Reference and Official Documentation\">Cisco IOS Interface Command Reference and Official Documentation<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Authoritative_Cisco_Command_Reference_Manuals\" title=\"Authoritative Cisco Command Reference Manuals\">Authoritative Cisco Command Reference Manuals<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Command_Syntax_Specifications\" title=\"Command Syntax Specifications\">Command Syntax Specifications<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Official_Documentation_Lookup_Path\" title=\"Official Documentation Lookup Path\">Official Documentation Lookup Path<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Choosing_the_Right_Command_Administrative_Config_vs_Operational_Status\"><\/span>Choosing the Right Command: Administrative Config vs. Operational Status<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Before running interface commands, it is essential to know whether you need to view the <strong>administrative configuration<\/strong> (the commands explicitly typed into the switch) or the <strong>operational status<\/strong> (the live state negotiated with the connected device). For example, a port configured with <code>speed auto<\/code> and <code>duplex auto<\/code> will not display its actual operating rate in the running configuration; you must query the operational interface state to see if it negotiated 1000 Mbps full-duplex.<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Command<\/th>\n<th style=\"text-align: left;\">Primary Purpose<\/th>\n<th style=\"text-align: left;\">Config vs. Operational<\/th>\n<th style=\"text-align: left;\">Key Data Displayed<\/th>\n<th style=\"text-align: left;\">Scope<\/th>\n<th style=\"text-align: left;\">Best Used For<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><code>show running-config interface &lt;id&gt;<\/code><\/td>\n<td style=\"text-align: left;\">Views explicit CLI commands applied to the port<\/td>\n<td style=\"text-align: left;\">Administrative<\/td>\n<td style=\"text-align: left;\">Non-default subcommands (VLANs, descriptions, QoS, spanning-tree, ACLs)<\/td>\n<td style=\"text-align: left;\">Single port<\/td>\n<td style=\"text-align: left;\">Auditing exact syntax applied to a port or copying config to another switch<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><code>show interfaces status<\/code><\/td>\n<td style=\"text-align: left;\">Summarizes live link state across the switch<\/td>\n<td style=\"text-align: left;\">Operational<\/td>\n<td style=\"text-align: left;\">Port description, link status (<code>connected<\/code>\/<code>notconnect<\/code>), VLAN\/Trunk indicator, negotiated duplex (<code>a-full<\/code>), and speed (<code>a-1000<\/code>)<\/td>\n<td style=\"text-align: left;\">All ports (or single port if specified)<\/td>\n<td style=\"text-align: left;\">Quick health check of port link states, speed\/duplex mismatches, and basic VLAN assignments<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><code>show interfaces &lt;id&gt; switchport<\/code><\/td>\n<td style=\"text-align: left;\">Inspects comprehensive Layer 2 parameters<\/td>\n<td style=\"text-align: left;\">Both<\/td>\n<td style=\"text-align: left;\">Admin vs. Operational mode, Access VLAN, Native VLAN, Voice VLAN, trunk encapsulation, and pruning<\/td>\n<td style=\"text-align: left;\">Single port (or all if <code>&lt;id&gt;<\/code> omitted)<\/td>\n<td style=\"text-align: left;\">Verifying access vs. trunk behavior, Dynamic Trunking Protocol (DTP) state, and VLAN tagging rules<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><code>show interfaces &lt;id&gt;<\/code><\/td>\n<td style=\"text-align: left;\">Displays hardware-level and Layer 1\/Layer 2 statistics<\/td>\n<td style=\"text-align: left;\">Operational<\/td>\n<td style=\"text-align: left;\">MAC\/BIA address, MTU, bandwidth, input\/output load, queue drops, CRC errors, and runts\/giants<\/td>\n<td style=\"text-align: left;\">Single port (or all if <code>&lt;id&gt;<\/code> omitted)<\/td>\n<td style=\"text-align: left;\">Diagnosing physical cable faults, duplex collisions, and bandwidth saturation<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>When reading <code>show interfaces status<\/code> output, pay close attention to the <code>a-<\/code> prefix under the Duplex and Speed columns (such as <code>a-full<\/code> and <code>a-1000<\/code>). The prefix indicates that the values were achieved dynamically via auto-negotiation rather than hard-coded in the configuration.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Viewing_the_Running_Configuration_for_a_Specific_Port_or_Range\"><\/span>Viewing the Running Configuration for a Specific Port or Range<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Once you know you want to inspect the administrative configuration, use the <code>show running-config interface<\/code> command in privileged EXEC mode (<code>#<\/code>) to pull the exact configuration block for a physical port or EtherChannel without scrolling through the entire configuration file.<\/p>\n<pre><code class=\"language-ios\">! 1. View the active configuration of a single physical port\nSwitch# show running-config interface GigabitEthernet1\/0\/1\n\n! Shorthand syntax supported across Cisco IOS and IOS XE\nSwitch# sh run int gi1\/0\/1\n\n! 2. View the configuration of a logical Port-Channel interface\nSwitch# show running-config interface Port-channel 1\n\n! 3. View the configuration of a port including all hidden default settings\nSwitch# show running-config interface GigabitEthernet1\/0\/1 all\n\n! 4. View the effective configuration (merges manual config with dynamic templates\/auto-QoS)\nSwitch# show derived-config interface GigabitEthernet1\/0\/1\n\n! 5. View the running configuration for a contiguous range of ports (ports 1 through 5)\nSwitch# show running-config | section interface GigabitEthernet1\/0\/[1-5]$\n\n! 6. View the running configuration for multiple non-contiguous ports (ports 1, 3, and 10)\nSwitch# show running-config | section interface GigabitEthernet1\/0\/(1|3|10)$\n<\/code><\/pre>\n<p>Sample output for <code>show running-config interface GigabitEthernet1\/0\/1<\/code>:<\/p>\n<pre><code class=\"language-ios\">Building configuration...\n\nCurrent configuration : 214 bytes\n!\ninterface GigabitEthernet1\/0\/1\n description Workstation_Floor2\n switchport access vlan 20\n switchport mode access\n switchport voice vlan 120\n spanning-tree portfast\nend\n<\/code><\/pre>\n<p>Because standard Cisco IOS only hides unmodified default commands in <code>show running-config interface &lt;id&gt;<\/code>, appending the <code>all<\/code> keyword or using regex section filters is the fastest way to audit implicit defaults and multi-port blocks at scale.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Verify_Port_VLANs_Trunking_and_Layer_2_Settings\"><\/span>How to Verify Port VLANs, Trunking, and Layer 2 Settings<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Because the running configuration hides default Layer 2 settings\u2014such as whether a port is dynamically negotiating a trunk via DTP or using the default native VLAN 1\u2014you should follow a structured verification flow to check VLAN and trunking parameters.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Inspect_Detailed_Switchport_Parameters\"><\/span>Step 1: Inspect Detailed Switchport Parameters<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Run <code>show interfaces &lt;interface-id&gt; switchport<\/code> to examine how the port handles Layer 2 traffic:<\/p>\n<pre><code class=\"language-ios\">Switch# show interfaces GigabitEthernet1\/0\/1 switchport\nName: Gi1\/0\/1\nSwitchport: Enabled\nAdministrative Mode: static access\nOperational Mode: static access\nAdministrative Trunking Encapsulation: dot1q\nOperational Trunking Encapsulation: native\nNegotiation of Trunking: Off\nAccess Mode VLAN: 20 (Users)\nTrunking Native Mode VLAN: 1 (default)\nAdministrative Native VLAN tagging: enabled\nVoice VLAN: 120 (VoIP)\n&lt;output omitted&gt;\nTrunking VLANs Enabled: ALL\nPruning VLANs Enabled: 2-1001\n<\/code><\/pre>\n<p>Review these critical fields in the output:<br \/>\n1. <strong>Administrative Mode vs. Operational Mode:<\/strong> Confirms whether the port is configured as <code>static access<\/code>, <code>trunk<\/code>, <code>dynamic auto<\/code>, or <code>dynamic desirable<\/code>, and what state it actually resolved to (<code>Operational Mode<\/code>).<br \/>\n2. <strong>Access Mode VLAN:<\/strong> Displays the data VLAN assigned to untagged frames when the port operates in access mode.<br \/>\n3. <strong>Trunking Native Mode VLAN:<\/strong> Identifies the VLAN used for untagged traffic if the port operates as an 802.1Q trunk.<br \/>\n4. <strong>Voice VLAN:<\/strong> Confirms whether a dedicated auxiliary VLAN is advertised via CDP\/LLDP to attached IP phones.<br \/>\n5. <strong>Trunking VLANs Enabled:<\/strong> Lists which VLANs are permitted to cross the port when trunking is active.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Verify_Active_Trunk_Links_and_Forwarding_State\"><\/span>Step 2: Verify Active Trunk Links and Forwarding State<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>If a port is operating as a trunk, checking the switchport configuration alone does not guarantee traffic is passing. Run <code>show interfaces trunk<\/code> to confirm active trunk negotiation and Spanning Tree Protocol (STP) forwarding status:<\/p>\n<pre><code class=\"language-ios\">Switch# show interfaces trunk\n\nPort        Mode             Encapsulation  Status        Native vlan\nGi1\/0\/24    on               802.1q         trunking      99\n\nPort        Vlans allowed on trunk\nGi1\/0\/24    10,20,99,120\n\nPort        Vlans allowed and active in management domain\nGi1\/0\/24    10,20,99,120\n\nPort        Vlans in spanning tree forwarding state and not pruned\nGi1\/0\/24    10,20,99,120\n<\/code><\/pre>\n<p>If a VLAN appears under <code>Vlans allowed on trunk<\/code> but is missing from <code>Vlans allowed and active in management domain<\/code>, the VLAN has not been created in the local switch&#8217;s VLAN database (<code>show vlan brief<\/code>). Always verify that your target VLAN reaches the final table (<code>spanning tree forwarding state<\/code>) to ensure traffic is not blocked by STP.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Troubleshooting_Port_Security_and_Error-Disabled_Interfaces\"><\/span>Troubleshooting Port Security and Error-Disabled Interfaces<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When an access port stops passing traffic even though a valid device is plugged in, Layer 2 security policies are often the cause. Follow these steps to inspect port security rules, MAC address limits, and error-disabled states.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_1_Check_if_the_Port_Is_Error-Disabled\"><\/span>Step 1: Check if the Port Is Error-Disabled<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Instead of guessing why a port is shut down, query the switch&#8217;s error-disabled table to see the exact feature that triggered the outage:<\/p>\n<pre><code class=\"language-ios\">Switch# show interfaces status err-disabled\n\nPort      Name               Status       Reason               Err-disabled Vlans\nGi1\/0\/5   Printer_Port       err-disabled psecure-violation\nGi1\/0\/12  Conference_Room    err-disabled bpduguard\n<\/code><\/pre>\n<p>The <code>Reason<\/code> column pinpoints whether the shutdown was caused by a port-security MAC violation (<code>psecure-violation<\/code>), an unauthorized switch or loop (<code>bpduguard<\/code>), cable instability (<code>link-flap<\/code>), or another protective policy.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_2_Verify_Port_Security_Settings_and_Violation_Counters\"><\/span>Step 2: Verify Port Security Settings and Violation Counters<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To inspect the security rules and current status on a specific interface, run <code>show port-security interface &lt;interface-id&gt;<\/code>:<\/p>\n<pre><code class=\"language-ios\">Switch# show port-security interface GigabitEthernet1\/0\/5\nPort Security              : Enabled\nPort Status                : Secure-shutdown\nViolation Mode             : Shutdown\nAging Time                 : 0 mins\nAging Type                 : Absolute\nSecureStatic Address Aging : Disabled\nMaximum MAC Addresses      : 1\nTotal MAC Addresses        : 1\nConfigured MAC Addresses   : 0\nSticky MAC Addresses       : 1\nLast Source Address:Vlan   : 0050.7966.6802:20\nSecurity Violation Count   : 1\n<\/code><\/pre>\n<p>Key troubleshooting indicators include:<br \/>\n* <strong>Port Status:<\/strong> Shows <code>Secure-up<\/code> (operating normally), <code>Secure-down<\/code> (port is administratively down or unplugged), or <code>Secure-shutdown<\/code> (tripped into an <code>err-disabled<\/code> state).<br \/>\n* <strong>Violation Mode:<\/strong> Indicates whether unauthorized MAC addresses cause the port to shut down completely (<code>Shutdown<\/code>), drop rogue frames while logging an alert (<code>Restrict<\/code>), or silently drop rogue frames (<code>Protect<\/code>).<br \/>\n* <strong>Maximum vs. Total MAC Addresses:<\/strong> Shows whether the port has reached its allowed hardware address ceiling.<br \/>\n* <strong>Last Source Address:Vlan:<\/strong> Identifies the exact MAC address and VLAN that last communicated on the port\u2014providing the culprit MAC address when <code>Security Violation Count<\/code> increments.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Step_3_Audit_Learned_and_Sticky_MAC_Addresses\"><\/span>Step 3: Audit Learned and Sticky MAC Addresses<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To see which specific MAC addresses are currently authorized and bound to the interface, run:<\/p>\n<pre><code class=\"language-ios\">Switch# show port-security address interface GigabitEthernet1\/0\/5\n               Secure Mac Address Table\n-----------------------------------------------------------------------------\nVlan    Mac Address       Type                          Ports   Remaining Age\n                                                                   (mins)\n----    -----------       ----                          -----   -------------\n  20    001b.54c2.8a11    SecureSticky                  Gi1\/0\/5        -\n-----------------------------------------------------------------------------\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"Step_4_Check_Automatic_Recovery_Timers\"><\/span>Step 4: Check Automatic Recovery Timers<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Finally, run <code>show errdisable recovery<\/code> to verify whether the switch is configured to automatically re-enable error-disabled ports after a timeout interval, or if you must manually reset the port using <code>shutdown<\/code> followed by <code>no shutdown<\/code>.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Checking_Cisco_Switch_Port_Configuration_via_the_Web_GUI\"><\/span>Checking Cisco Switch Port Configuration via the Web GUI<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>If you prefer not to use the command-line interface, or if you are managing Cisco Small Business (SMB) switches where the web interface is primary, you can inspect all administrative and operational port settings through a browser.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Prerequisite_Connect_to_the_WebUI\"><\/span>Prerequisite: Connect to the WebUI<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Open a web browser, enter <code>https:\/\/&lt;switch-management-ip&gt;<\/code>, and log in with an account that has privilege level 15 (or admin rights).<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Method_A_Cisco_Catalyst_Switches_IOS_XE_WebUI\"><\/span>Method A: Cisco Catalyst Switches (IOS XE WebUI)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>For enterprise switches such as the Catalyst 9200, 9300, and 9500 series running IOS XE:<br \/>\n1. <strong>Check Live Operational State:<\/strong> In the left navigation pane, click <strong>Monitoring &gt; General &gt; Interfaces<\/strong>. The top graphical faceplate displays color-coded link statuses (green for active, gray for down, amber for administrative shutdown or error). Below the graphic, the interface table lists real-time operational status, negotiated speed, duplex, and input\/output utilization.<br \/>\n2. <strong>Inspect Administrative Port Settings:<\/strong> Navigate to <strong>Configuration &gt; Interface &gt; Ethernet<\/strong>.<br \/>\n3. <strong>View Individual Port Details:<\/strong> Click the specific port name (e.g., <code>Gi1\/0\/1<\/code>) in the table to open the <strong>Edit Ethernet Interface<\/strong> panel.<br \/>\n   * Under the <strong>General<\/strong> tab, verify the Port Type (<code>Access<\/code> or <code>Trunk<\/code>), administrative status (<code>Enabled<\/code>\/<code>Disabled<\/code>), VLAN ID (or Native VLAN and Allowed VLANs for trunks), Speed, and Duplex settings.<br \/>\n   * Under the <strong>Security<\/strong> tab, review Port Security status, maximum MAC counts, sticky MAC enforcement, and storm control thresholds.<br \/>\n   * Under the <strong>Advanced<\/strong> tab, check Spanning Tree PortFast and BPDU Guard settings.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Method_B_Cisco_Business_and_SMB_Switches_CBS250350_Catalyst_12001300\"><\/span>Method B: Cisco Business and SMB Switches (CBS250\/350 &amp; Catalyst 1200\/1300)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>For Cisco Business switches using the graphical SMB dashboard:<br \/>\n1. <strong>Check Physical Link and Speed Settings:<\/strong> Navigate to <strong>Port Management &gt; Port Settings<\/strong>. Here you can compare the <strong>Admin Status<\/strong> (<code>Up<\/code>\/<code>Down<\/code>) against the <strong>Operational Status<\/strong>, inspect auto-negotiation state, check current operational speed\/duplex, and see if 802.3x Flow Control is active.<br \/>\n2. <strong>Check Port VLAN and Trunk Configuration:<\/strong> Navigate to <strong>VLAN Management &gt; Interface Settings<\/strong>. This table displays each port&#8217;s <strong>Interface VLAN Mode<\/strong> (<code>Access<\/code>, <code>Trunk<\/code>, or <code>General<\/code>), Frame Type filtering, and Ingress Filtering state.<br \/>\n3. <strong>Verify Tagged and Untagged VLAN Memberships:<\/strong> Go to <strong>VLAN Management &gt; Port VLAN Membership<\/strong>. Select a port or port range to see its Administrative and Operational VLAN memberships, including which VLAN ID is marked as <strong>U<\/strong> (Untagged), <strong>T<\/strong> (Tagged), or <strong>P<\/strong> (PVID \/ Native VLAN).<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Cisco_IOS_Interface_Command_Reference_and_Official_Documentation\"><\/span>Cisco IOS Interface Command Reference and Official Documentation<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>For network engineers requiring exhaustive command syntax definitions, optional keyword flags, SNMP MIB mappings, and release-specific behavior across Cisco operating systems, refer to the authoritative Cisco documentation manuals below.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Authoritative_Cisco_Command_Reference_Manuals\"><\/span>Authoritative Cisco Command Reference Manuals<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Cisco IOS Interface and Hardware Component Command Reference:<\/strong> Documents hardware-layer and physical interface verification commands, including <code>show interfaces<\/code>, <code>show controllers<\/code>, <code>show running-config interface<\/code>, and <code>show derived-config<\/code>.<\/li>\n<li><strong>Cisco IOS LAN Switching Command Reference:<\/strong> Documents Layer 2 switching verification commands, including <code>show interfaces switchport<\/code>, <code>show interfaces trunk<\/code>, <code>show interfaces status<\/code>, and <code>show vlan<\/code>.<\/li>\n<li><strong>Cisco IOS Security Command Reference (Commands S to Z):<\/strong> Documents port-level access control and MAC security commands, including <code>show port-security<\/code>, <code>show port-security interface<\/code>, and <code>show port-security address<\/code>.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Command_Syntax_Specifications\"><\/span>Command Syntax Specifications<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p><strong>Command:<\/strong> <code>show interfaces<\/code><br \/>\n* <strong>Syntax:<\/strong> <code>show interfaces [interface-type interface-number] [status [err-disabled] | switchport | trunk | stats | counters [errors |etherchannel | protocol status] | description | capabilities | transceiver]<\/code><br \/>\n* <strong>Command Mode:<\/strong> User EXEC (<code>&gt;<\/code>) or Privileged EXEC (<code>#<\/code>). Note: Certain sub-options and complete configuration outputs require Privileged EXEC mode.<br \/>\n* <strong>OS Compatibility:<\/strong> Cisco IOS Release 12.2 and later; Cisco IOS XE Gibraltar 16.10.x, Amsterdam 17.x, and later.<\/p>\n<p><strong>Command:<\/strong> <code>show running-config interface<\/code><br \/>\n* <strong>Syntax:<\/strong> <code>show running-config interface type number [all]<\/code><br \/>\n* <strong>Command Mode:<\/strong> Privileged EXEC (<code>#<\/code>).<br \/>\n* <strong>Usage Guidelines:<\/strong> Queries the active configuration in RAM (<code>system:running-config<\/code>) scoped strictly to the specified physical interface, subinterface, VLAN SVI, or Port-Channel. Appending the <code>all<\/code> keyword displays both user-configured and system-default interface subcommands.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Official_Documentation_Lookup_Path\"><\/span>Official Documentation Lookup Path<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To locate platform-specific interface documentation for your exact switch model and software train on <code>cisco.com<\/code>:<br \/>\n1. Navigate to <strong>Support &gt; Product Support &gt; Switches<\/strong>.<br \/>\n2. Select your product family (for example, <strong>Cisco Catalyst 9300 Series Switches<\/strong>).<br \/>\n3. Open <strong>Command References<\/strong> to look up alphabetical CLI syntax definitions, or open <strong>Configuration Guides &gt; Interface and Hardware Components Configuration Guide<\/strong> matching your active Cisco IOS XE release.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Checking port configuration on a Cisco switch is straightforward once you match your verification method to the layer of data you need. Use <code>show running-config interface<\/code> (as covered above) when you need to audit explicit administrative commands, <code>show interfaces switchport<\/code> and <code>show interfaces trunk<\/code> to validate Layer 2 VLAN behavior, and <code>show interfaces status<\/code> or <code>show port-security interface<\/code> to diagnose live operational states and security shutdowns. Whether you execute these checks via the CLI or inspect them through the switch&#8217;s Web GUI, combining administrative and operational views gives you complete visibility into how every port on your switch is configured and performing.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-check-port-configuration-in-cisco-switch_24598.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Check+Port+Configuration+in+Cisco+Switch+https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\",\"How to Check Port Configuration in Cisco Switch\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Inspecting port settings on a Cisco switch requires distinguishing between what an administrator has configured in memory and how the interface is currently operating on the physical network. Because Cisco IOS and IOS XE store user-defined parameters in the running configuration while tracking real-time link negotiation, VLAN tagging, and security states in separate operational tables,&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Check Port Configuration in Cisco Switch - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Check Port Configuration in Cisco Switch - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"Inspecting port settings on a Cisco switch requires distinguishing between what an administrator has configured in memory and how the interface is currently operating on the physical network. Because Cisco IOS and IOS XE store user-defined parameters in the running configuration while tracking real-time link negotiation, VLAN tagging, and security states in separate operational tables,... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-17T09:16:58+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"11 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\",\"name\":\"How to Check Port Configuration in Cisco Switch - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-17T09:16:58+00:00\",\"dateModified\":\"2026-11-17T09:16:58+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Check Port Configuration in Cisco Switch\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Check Port Configuration in Cisco Switch\",\"datePublished\":\"2026-11-17T09:16:58+00:00\",\"dateModified\":\"2026-11-17T09:16:58+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#webpage\"},\"wordCount\":1633,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Check Port Configuration in Cisco Switch - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html","og_locale":"en_US","og_type":"article","og_title":"How to Check Port Configuration in Cisco Switch - SPOTO Official Blog","og_description":"Inspecting port settings on a Cisco switch requires distinguishing between what an administrator has configured in memory and how the interface is currently operating on the physical network. Because Cisco IOS and IOS XE store user-defined parameters in the running configuration while tracking real-time link negotiation, VLAN tagging, and security states in separate operational tables,... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-17T09:16:58+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"11 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html","name":"How to Check Port Configuration in Cisco Switch - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-17T09:16:58+00:00","dateModified":"2026-11-17T09:16:58+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Check Port Configuration in Cisco Switch"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Check Port Configuration in Cisco Switch","datePublished":"2026-11-17T09:16:58+00:00","dateModified":"2026-11-17T09:16:58+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#webpage"},"wordCount":1633,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-port-configuration-in-cisco-switch_24598.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24598"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24598"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24598\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24598"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24598"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24598"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}