{"id":24591,"date":"2026-11-17T16:58:51","date_gmt":"2026-11-17T08:58:51","guid":{"rendered":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html"},"modified":"2026-11-17T16:58:51","modified_gmt":"2026-11-17T08:58:51","slug":"how-to-check-packet-loss-on-cisco-switch","status":"publish","type":"post","link":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html","title":{"rendered":"How to Check Packet Loss on Cisco Switch"},"content":{"rendered":"<p>Diagnosing degraded network performance, sluggish application response times, or choppy VoIP calls often starts at the switching layer. Unlike full link outages that immediately trigger down alerts, silent packet drops on a switch port can throttle TCP throughput while every interface still displays an <code>up\/up<\/code> status. Because a Cisco switch can drop frames at the physical transceiver, ingress ring buffer, switching ASIC, or egress QoS queue, isolating the exact point of failure requires a structured diagnostic workflow.<\/p>\n<p>Checking packet loss on a Cisco switch involves inspecting port-level hardware counters via the CLI, interpreting specific error and discard metrics, running active probe tests for intermittent transit drops, and remediating underlying physical or buffer constraints.<\/p>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_17 counter-hierarchy counter-decimal ez-toc-light-blue\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" style=\"display: none;\"><i class=\"ez-toc-glyphicon ez-toc-icon-toggle\"><\/i><\/a><\/span><\/div>\n<nav><ul class=\"ez-toc-list ez-toc-list-level-1\"><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#Step-by-Step_Guide_to_Checking_Interface_Packet_Loss_via_the_CLI\" title=\"Step-by-Step Guide to Checking Interface Packet Loss via the CLI\">Step-by-Step Guide to Checking Interface Packet Loss via the CLI<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#Interpreting_Cisco_Switch_Interface_Counters_Input_Errors_vs_Output_Drops\" title=\"Interpreting Cisco Switch Interface Counters: Input Errors vs. Output Drops\">Interpreting Cisco Switch Interface Counters: Input Errors vs. Output Drops<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#What_is_the_difference_between_input_errors_and_output_drops_on_a_Cisco_switch\" title=\"What is the difference between input errors and output drops on a Cisco switch?\">What is the difference between input errors and output drops on a Cisco switch?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#What_do_runts_giants_and_CRC_errors_indicate\" title=\"What do runts, giants, and CRC errors indicate?\">What do runts, giants, and CRC errors indicate?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#How_can_you_tell_if_packet_loss_is_caused_by_a_duplex_mismatch\" title=\"How can you tell if packet loss is caused by a duplex mismatch?\">How can you tell if packet loss is caused by a duplex mismatch?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#Why_does_an_interface_show_high_output_drops_when_5-minute_bandwidth_utilization_is_low\" title=\"Why does an interface show high output drops when 5-minute bandwidth utilization is low?\">Why does an interface show high output drops when 5-minute bandwidth utilization is low?<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#What_causes_input_queue_drops_and_no_buffer_counters_to_increment\" title=\"What causes input queue drops and &#8220;no buffer&#8221; counters to increment?\">What causes input queue drops and &#8220;no buffer&#8221; counters to increment?<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#CLI_Templates_for_Testing_Intermittent_Packet_Loss_Extended_Ping_and_IP_SLA\" title=\"CLI Templates for Testing Intermittent Packet Loss (Extended Ping and IP SLA)\">CLI Templates for Testing Intermittent Packet Loss (Extended Ping and IP SLA)<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#1_Extended_Ping_Stress_Test_Template_IOS_IOS-XE\" title=\"1. Extended Ping Stress Test Template (IOS \/ IOS-XE)\">1. Extended Ping Stress Test Template (IOS \/ IOS-XE)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#2_Continuous_IP_SLA_ICMP-Echo_Probe_Template\" title=\"2. Continuous IP SLA ICMP-Echo Probe Template\">2. Continuous IP SLA ICMP-Echo Probe Template<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#3_Bidirectional_IP_SLA_UDP-Jitter_Template_Separating_Upstream_vs_Downstream_Drops\" title=\"3. Bidirectional IP SLA UDP-Jitter Template (Separating Upstream vs. Downstream Drops)\">3. Bidirectional IP SLA UDP-Jitter Template (Separating Upstream vs. Downstream Drops)<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#How_to_Fix_Output_Drops_Buffer_Exhaustion_and_Physical_Layer_Packet_Loss\" title=\"How to Fix Output Drops, Buffer Exhaustion, and Physical Layer Packet Loss\">How to Fix Output Drops, Buffer Exhaustion, and Physical Layer Packet Loss<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#Official_Cisco_Platform_Architecture_and_Hardware_Diagnostic_Reference\" title=\"Official Cisco Platform Architecture and Hardware Diagnostic Reference\">Official Cisco Platform Architecture and Hardware Diagnostic Reference<\/a><ul class=\"ez-toc-list-level-3\"><li class=\"ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#Cisco_Catalyst_9000_Series_IOS-XE_UADP_ASIC_Architecture\" title=\"Cisco Catalyst 9000 Series (IOS-XE \/ UADP ASIC Architecture)\">Cisco Catalyst 9000 Series (IOS-XE \/ UADP ASIC Architecture)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#Cisco_Nexus_9000_Series_NX-OS_Cloud_Scale_ASIC_Architecture\" title=\"Cisco Nexus 9000 Series (NX-OS \/ Cloud Scale ASIC Architecture)\">Cisco Nexus 9000 Series (NX-OS \/ Cloud Scale ASIC Architecture)<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-3\"><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#Platform_Command_Matrix_Catalyst_IOS-XE_vs_Nexus_NX-OS\" title=\"Platform Command Matrix: Catalyst IOS-XE vs. Nexus NX-OS\">Platform Command Matrix: Catalyst IOS-XE vs. Nexus NX-OS<\/a><\/li><\/ul><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#Best_SNMP_Network_Monitoring_Tools_for_Tracking_Cisco_Switch_Packet_Loss\" title=\"Best SNMP Network Monitoring Tools for Tracking Cisco Switch Packet Loss\">Best SNMP Network Monitoring Tools for Tracking Cisco Switch Packet Loss<\/a><\/li><li class=\"ez-toc-page-1 ez-toc-heading-level-2\"><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\/#Conclusion\" title=\"Conclusion\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Step-by-Step_Guide_to_Checking_Interface_Packet_Loss_via_the_CLI\"><\/span>Step-by-Step Guide to Checking Interface Packet Loss via the CLI<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Inspecting port-level counters in Cisco IOS, IOS-XE, or NX-OS is the fastest way to verify whether a switch is actively dropping frames. Follow this sequential workflow to isolate problematic ports without being misled by historical data.<\/p>\n<ol>\n<li>\n<p><strong>Verify and Reset Stale Interface Counters<\/strong><br \/>\n   By default, Cisco switch interface counters accumulate continuously since the last system reboot or manual reset. Before diagnosing an active complaint, verify when the counters were last cleared and reset them to establish a clean baseline:<br \/>\n   <code>ios<br \/>\n   Switch# show interfaces gigabitethernet1\/0\/1 | include Last clearing<br \/>\n     Last clearing of \"show interface\" counters never<br \/>\n   Switch# clear counters gigabitethernet1\/0\/1<br \/>\n   Clear \"show interface\" counters on this interface [confirm] y<\/code><br \/>\n   Wait 5 to 15 minutes (or reproduce the user&#8217;s traffic flow) before re-inspecting the port so that any incrementing numbers reflect current network conditions.<\/p>\n<\/li>\n<li>\n<p><strong>Scan All Switch Ports for Errors and Discards<\/strong><br \/>\n   If you do not know which specific port is dropping packets, run the switch-wide error matrix command to view physical errors and output discards across all interfaces simultaneously:<br \/>\n   &#8220;`ios<br \/>\n   Switch# show interfaces counters errors<\/p>\n<\/li>\n<\/ol>\n<p>Port        Align-Err     FCS-Err    Xmit-Err     Rcv-Err  UnderSize  OutDiscards<br \/>\n   Gi1\/0\/1             0           0           0           0          0            0<br \/>\n   Gi1\/0\/2             0        1420           0        1420         84            0<br \/>\n   Gi1\/0\/24            0           0           0           0          0        48912<br \/>\n   <code>``<br \/>\n   In this view, non-zero columns immediately point you to the faulty ports\u2014such as<\/code>Gi1\/0\/2<code>experiencing physical Receive\/FCS errors or<\/code>Gi1\/0\/24<code>experiencing heavy<\/code>OutDiscards`.<\/p>\n<ol>\n<li>\n<p><strong>Inspect Detailed Drop and Error Counters on a Target Port<\/strong><br \/>\n   Once you identify a suspect interface, inspect its granular packet loss statistics using <code>show interfaces &lt;interface-id&gt;<\/code>:<br \/>\n   <code>ios<br \/>\n   Switch# show interfaces gigabitethernet1\/0\/24<br \/>\n   GigabitEthernet1\/0\/24 is up, line protocol is up (connected)<br \/>\n     Hardware is Gigabit Ethernet, address is 0050.56bf.1a24 (bia 0050.56bf.1a24)<br \/>\n     MTU 1500 bytes, BW 1000000 Kbit\/sec, DLY 10 usec,<br \/>\n        reliability 255\/255, txload 185\/255, rxload 42\/255<br \/>\n     Full-duplex, 1000Mb\/s, media type is 10\/100\/1000BaseTX<br \/>\n     Input queue: 0\/2000\/0\/0 (size\/max\/drops\/flushes); Total output drops: 48912<br \/>\n     Queueing strategy: fifo<br \/>\n     Output queue: 0\/40 (size\/max)<br \/>\n     5 minute input rate 165420000 bits\/sec, 24110 packets\/sec<br \/>\n     5 minute output rate 728910000 bits\/sec, 89400 packets\/sec<br \/>\n        14589210 packets input, 9841204112 bytes, 0 no buffer<br \/>\n        Received 41210 broadcasts (38102 multicasts)<br \/>\n        0 runts, 0 giants, 0 throttles<br \/>\n        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored<br \/>\n        89412500 packets output, 114201948200 bytes, 0 underruns<br \/>\n        0 output errors, 0 collisions, 2 interface resets<\/code><br \/>\n   To filter this output across multiple interfaces and display only lines relevant to packet loss, use a regular expression pipe:<br \/>\n   <code>ios<br \/>\n   Switch# show interfaces | include line protocol|drops|errors<\/code><\/p>\n<\/li>\n<li>\n<p><strong>Check Real-Time Rate and Queue Counters on NX-OS<\/strong><br \/>\n   On Cisco Nexus switches running NX-OS, standard <code>show interface<\/code> output follows a slightly different layout. Use the detailed counter view or queuing view to isolate per-class drops:<br \/>\n   <code>nxos<br \/>\n   Nexus# show interface ethernet1\/1 counters detailed<br \/>\n   Nexus# show queuing interface ethernet1\/1<\/code><br \/>\n   <strong>Key Takeaway:<\/strong> Always clear historical counters first, use <code>show interfaces counters errors<\/code> to triage the whole switch at a glance, and drill down into <code>show interfaces &lt;port&gt;<\/code> to separate ingress errors from egress drops.<\/p>\n<\/li>\n<\/ol>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Interpreting_Cisco_Switch_Interface_Counters_Input_Errors_vs_Output_Drops\"><\/span>Interpreting Cisco Switch Interface Counters: Input Errors vs. Output Drops<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Finding non-zero counters in the CLI output is only half the diagnostic process; understanding what each metric represents tells you whether the packet loss stems from damaged cabling, a configuration mismatch, or traffic congestion.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"What_is_the_difference_between_input_errors_and_output_drops_on_a_Cisco_switch\"><\/span>What is the difference between input errors and output drops on a Cisco switch?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p><strong>Input errors<\/strong> occur on ingress before the switch forwards the frame. They indicate that the switch received a physically corrupted, malformed, or truncated Ethernet frame from the connected device or cable and had to discard it. <strong>Output drops<\/strong> (<code>Total output drops<\/code> or <code>OutDiscards<\/code>) occur on egress after the switching ASIC has already made a valid forwarding decision. Output drops mean the frame itself was healthy, but the outbound port&#8217;s transmit queue buffer was full due to bandwidth congestion or bursty traffic.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"What_do_runts_giants_and_CRC_errors_indicate\"><\/span>What do runts, giants, and CRC errors indicate?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Runts:<\/strong> Ethernet frames smaller than the minimum valid 64-byte IEEE 802.3 frame size with a bad FCS. Runts are most commonly caused by half-duplex collisions, duplex mismatches, or severe electrical interference on copper cabling.<\/li>\n<li><strong>Giants:<\/strong> Ethernet frames that exceed the interface&#8217;s configured maximum transmission unit (standard 1518 bytes untagged or 1522 bytes with an 802.1Q VLAN tag) and also contain a bad FCS. They typically occur when a connected host or upstream trunk sends jumbo frames (e.g., 9000 MTU) into an access or trunk port still set to a 1500-byte MTU.<\/li>\n<li><strong>CRC (Cyclic Redundancy Check) \/ FCS-Err:<\/strong> Frames that arrived with a calculated checksum that does not match the sender&#8217;s FCS trailer. Rising CRC errors point directly to Layer 1 faults: damaged patch cables, dirty fiber optic end-faces, failing SFP\/SFP+ transceivers, electromagnetic interference (EMI), or duplex mismatches.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"How_can_you_tell_if_packet_loss_is_caused_by_a_duplex_mismatch\"><\/span>How can you tell if packet loss is caused by a duplex mismatch?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>A duplex mismatch happens when one link partner is manually hardcoded (for example, <code>speed 100<\/code> and <code>duplex full<\/code>) while the other is set to <code>auto<\/code>. Because the hardcoded end disables auto-negotiation pulses, the auto-negotiating end falls back to <strong>100 Mbps Half-Duplex<\/strong> per the IEEE standard. This creates a unmistakable counter signature:<br \/>\n* The <strong>Full-Duplex side<\/strong> transmits whenever it wants, causing frames to collide in transit, and logs climbing <strong>input errors, CRC errors, and runts<\/strong>.<br \/>\n* The <strong>Half-Duplex side<\/strong> waits for carrier sense and detects frames arriving while it is transmitting, logging climbing <strong>late collisions, deferred transmissions, and output errors<\/strong>.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Why_does_an_interface_show_high_output_drops_when_5-minute_bandwidth_utilization_is_low\"><\/span>Why does an interface show high output drops when 5-minute bandwidth utilization is low?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Cisco switches calculate interface bandwidth rates (<code>5 minute output rate<\/code>) as a rolling average over a default 300-second <code>load-interval<\/code>. However, switch egress buffers are measured in milliseconds of memory. <strong>Microbursts<\/strong> occur when traffic spikes to line rate for just a few milliseconds\u2014most commonly when a 10 Gbps or 25 Gbps uplink forwards a burst of storage or backup traffic out of a 1 Gbps access port. The 1 Gbps port&#8217;s egress queue overflows instantly and drops packets, while the 5-minute average utilization still reports under 15%.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"What_causes_input_queue_drops_and_no_buffer_counters_to_increment\"><\/span>What causes input queue drops and &#8220;no buffer&#8221; counters to increment?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Unlike output drops, <strong>input queue drops<\/strong> and <strong>no buffer<\/strong> increments mean the switch could not process incoming frames fast enough. On modern hardware-switched platforms, this rarely happens for transit data-plane traffic unless ingress hardware rings are saturated; instead, it indicates excessive control-plane &#8220;punt&#8221; traffic\u2014such as ARP storms, STP topology floods, TTL=1 packets, or multicast join floods\u2014overwhelming the internal CPU-bound ingress queues.<\/p>\n<p><strong>Key Takeaway:<\/strong> Treat rising <code>input errors<\/code>, <code>CRC<\/code>, and <code>runts<\/code> as Layer 1 or duplex problems, and treat rising <code>Total output drops<\/code> as egress bandwidth contention or microburst buffer exhaustion.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"CLI_Templates_for_Testing_Intermittent_Packet_Loss_Extended_Ping_and_IP_SLA\"><\/span>CLI Templates for Testing Intermittent Packet Loss (Extended Ping and IP SLA)<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When local interface counters look clean\u2014or when packet loss only occurs intermittently across a multi-hop Layer 3 switched path\u2014passive counter checks are not enough. Use the following CLI templates directly on your Cisco switch to actively generate test probes and measure live packet loss percentages.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"1_Extended_Ping_Stress_Test_Template_IOS_IOS-XE\"><\/span>1. Extended Ping Stress Test Template (IOS \/ IOS-XE)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Use extended ping with a high packet count, a shortened 1-second timeout, a specified source VLAN\/interface, and a 1500-byte payload with the Don&#8217;t Fragment (<code>DF<\/code>) bit set to uncover both intermittent drops and hidden MTU bottlenecks:<\/p>\n<pre><code class=\"language-ios\">Switch# ping\nProtocol [ip]: ip\nTarget IP address: 10.20.30.1\nRepeat count [5]: 1000\nDatagram size [100]: 1500\nTimeout in seconds [2]: 1\nExtended commands [n]: y\nSource address or interface: Vlan10\nType of service [0]: 0\nSet DF bit in IP header? [no]: yes\nValidate reply data? [no]: yes\nData pattern [0x0000]: 0xABCD\nLoose, Strict, Record, Timestamp, Verbose[none]: none\nSweep range of sizes [n]: n\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"2_Continuous_IP_SLA_ICMP-Echo_Probe_Template\"><\/span>2. Continuous IP SLA ICMP-Echo Probe Template<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>To track intermittent packet loss over hours or days without keeping an SSH session open, configure a background IP SLA <code>icmp-echo<\/code> probe:<\/p>\n<pre><code class=\"language-ios\">! Configure the IP SLA ICMP probe\nSwitch(config)# ip sla 10\nSwitch(config-ip-sla)# icmp-echo 10.20.30.1 source-interface Vlan10\nSwitch(config-ip-sla-echo)# request-data-size 1400\nSwitch(config-ip-sla-echo)# timeout 1000\nSwitch(config-ip-sla-echo)# frequency 5\nSwitch(config-ip-sla-echo)# exit\n\n! Schedule the probe to run continuously starting immediately\nSwitch(config)# ip sla schedule 10 life forever start-time now\nSwitch(config)# end\n\n! Verify accumulated packet loss and round-trip latency\nSwitch# show ip sla statistics 10\n<\/code><\/pre>\n<h3><span class=\"ez-toc-section\" id=\"3_Bidirectional_IP_SLA_UDP-Jitter_Template_Separating_Upstream_vs_Downstream_Drops\"><\/span>3. Bidirectional IP SLA UDP-Jitter Template (Separating Upstream vs. Downstream Drops)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Standard ICMP pings only report round-trip failure, leaving you guessing whether packets were dropped on the forward path or the return path. Configure an <code>ip sla responder<\/code> on the target Cisco switch and run a <code>udp-jitter<\/code> probe to measure directional loss (<code>Packet Loss SD<\/code> vs. <code>Packet Loss DS<\/code>):<\/p>\n<pre><code class=\"language-ios\">! --- ON REMOTE TARGET SWITCH (10.20.30.1) ---\nRemote-Switch(config)# ip sla responder\nRemote-Switch(config)# exit\n\n! --- ON SOURCE SWITCH ---\nSource-Switch(config)# ip sla 20\nSource-Switch(config-ip-sla)# udp-jitter 10.20.30.1 16384 source-ip 10.10.10.1 num-packets 100 interval 20\nSource-Switch(config-ip-sla-jitter)# frequency 60\nSource-Switch(config-ip-sla-jitter)# exit\nSource-Switch(config)# ip sla schedule 20 life forever start-time now\nSource-Switch(config)# end\n\n! Check directional packet loss (SD = Source to Destination, DS = Destination to Source)\nSource-Switch# show ip sla statistics 20 | include Packet Loss|RTT\n<\/code><\/pre>\n<p><strong>Key Takeaway:<\/strong> Use extended pings with the <code>DF<\/code> bit for immediate MTU and link stress testing, and deploy IP SLA <code>udp-jitter<\/code> probes when you need to isolate which direction of a full-duplex path is dropping packets.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Fix_Output_Drops_Buffer_Exhaustion_and_Physical_Layer_Packet_Loss\"><\/span>How to Fix Output Drops, Buffer Exhaustion, and Physical Layer Packet Loss<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Once you have pinpointed the faulty port and verified whether the drops are occurring at ingress (physical\/duplex) or egress (queue buffer starvation), apply the matching remediation steps below.<\/p>\n<ol>\n<li><strong>Resolve Physical Layer and Duplex Mismatches (For Input Errors, CRC, and Runts)<\/strong><\/li>\n<li><strong>Standardize Auto-Negotiation:<\/strong> Check the port configuration (<code>show running-config interface &lt;id&gt;<\/code>) and the connected host settings. Set both link partners to auto-negotiate speed and duplex unless hardware restrictions dictate otherwise:<br \/>\n     <code>ios<br \/>\n     Switch(config)# interface gigabitethernet1\/0\/2<br \/>\n     Switch(config-if)# speed auto<br \/>\n     Switch(config-if)# duplex auto<\/code><\/li>\n<li>\n<p><strong>Verify Optical Transceiver Power Levels (DOM):<\/strong> On fiber links logging CRC or input errors, inspect Digital Optical Monitoring (DOM) metrics to check if Rx\/Tx optical power (in dBm) falls outside the module&#8217;s warning or alarm thresholds:<br \/>\n     <code>ios<br \/>\n     Switch# show interfaces gigabitethernet1\/1\/1 transceiver detail<\/code><br \/>\n     If receive power is below threshold, clean the fiber patch cord connectors with an optical cleaner, swap the fiber patch lead, or replace the degraded SFP\/SFP+ module.<\/p>\n<\/li>\n<li>\n<p><strong>Expand Egress QoS Softmax Buffers on Cisco Catalyst 9000 Switches (IOS-XE)<\/strong><br \/>\n   On Catalyst 9200, 9300, and 9500 Series switches, microbursts commonly trigger output drops on 1G downlinks even when total switch memory is underutilized. You can permit congested queues to borrow additional dynamic shared buffer memory by increasing the <code>qos queue-softmax-multiplier<\/code> from its default value (<code>100<\/code>) up to <code>1200<\/code>:<br \/>\n   <code>ios<br \/>\n   Switch(config)# qos queue-softmax-multiplier 400<br \/>\n   Switch(config)# end<br \/>\n   Switch# show platform hardware fed switch active qos queue config interface gigabitethernet1\/0\/24<\/code><br \/>\n   Raising the multiplier to <code>400<\/code> or <code>800<\/code> quadruples or octuples the dynamic buffer ceiling available to absorb transient microbursts before tail-drop occurs.<\/p>\n<\/li>\n<li>\n<p><strong>Rebalance Queue-Set Buffers on Legacy Catalyst Switches (2960-X \/ 3750-X \/ 3850)<\/strong><br \/>\n   On older Catalyst switches using MLS QoS (<code>mls qos<\/code>), enabling QoS often carves port buffers into restrictive partitions where the default traffic queue (Queue 2) only receives a small fraction of buffer space, while unused voice\/priority queues hoard reserved memory. Reallocate buffer ratios and increase the maximum reserve threshold on the active queue-set:<br \/>\n   <code>ios<br \/>\n   ! Allocate 70% of buffer memory to Queue 2 (default best-effort queue)<br \/>\n   Switch(config)# mls qos queue-set output 1 buffers 10 70 10 10<br \/>\n   ! Allow Queue 2 to borrow up to 400% of its reserved threshold from the common pool<br \/>\n   Switch(config)# mls qos queue-set output 1 threshold 2 200 200 100 400<\/code><br \/>\n   On Catalyst 3650\/3850 platforms using MQC policy-maps, adjust the <code>queue-buffers ratio<\/code> within your egress queuing policy-map instead.<\/p>\n<\/li>\n<li>\n<p><strong>Mitigate Persistent Speed Mismatches and Oversubscription<\/strong><br \/>\n   Buffer tuning only resolves transient microbursts lasting milliseconds; it cannot fix sustained bandwidth oversubscription where 10 Gbps of continuous traffic attempts to exit a 1 Gbps port. For sustained congestion:<\/p>\n<\/li>\n<li>Bundle multiple physical links into an LACP EtherChannel (<code>channel-group &lt;number&gt; mode active<\/code>) to increase aggregate egress bandwidth.<\/li>\n<li>Apply traffic shaping (<code>shape average<\/code>) on bursty upstream senders so traffic is smoothed before hitting lower-speed access ports.<\/li>\n<\/ol>\n<p><strong>Key Takeaway:<\/strong> Fix physical cabling and auto-negotiation to stop ingress errors, expand dynamic QoS queue buffers (<code>qos queue-softmax-multiplier<\/code> or <code>queue-set<\/code>) to absorb microbursts, and upgrade or bundle links when sustained traffic exceeds port capacity.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Official_Cisco_Platform_Architecture_and_Hardware_Diagnostic_Reference\"><\/span>Official Cisco Platform Architecture and Hardware Diagnostic Reference<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>When standard interface counters do not provide enough visibility into internal ASIC drops, administrators must query hardware-specific forwarding engines. Cisco switching families use distinct ASIC architectures, operating systems, and official documentation trees for diagnosing packet drops.<\/p>\n<h3><span class=\"ez-toc-section\" id=\"Cisco_Catalyst_9000_Series_IOS-XE_UADP_ASIC_Architecture\"><\/span>Cisco Catalyst 9000 Series (IOS-XE \/ UADP ASIC Architecture)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Architecture Definition:<\/strong> Catalyst 9200, 9300, 9400, and 9500 switches run Cisco IOS-XE over the Unified Access Data Plane (UADP) or Silicon One ASIC. Packet buffering is managed by the Forwarding Engine Driver (FED) across two shared buffer pools (2 queues on strict priority and 6 queues on normal default sharing, depending on the QoS policy).<\/li>\n<li><strong>Hardware-Level Diagnostic Commands:<\/strong><\/li>\n<li><code>show platform hardware fed switch active qos queue stats interface &lt;interface-id&gt;<\/code> \u2014 Displays exact per-queue enqueue and drop counters in both packets and bytes at the UADP ASIC level.<\/li>\n<li><code>show platform hardware fed switch active fwd-asic drops exceptions<\/code> \u2014 Displays internal ASIC exception drops (such as VLAN spanning-tree blocks, ACL drops, or L3 MTU failures) that do not appear as standard interface output drops.<\/li>\n<li><strong>Official Cisco Documentation Reference:<\/strong> <em>Troubleshoot Output Drops on Catalyst 9000 Switches<\/em> and <em>Cisco Catalyst 9000 Series Switching Platform QoS and Buffer Architecture White Paper<\/em> (located under Cisco Support &gt; Switches &gt; Catalyst 9300\/9500 Series Switches &gt; Troubleshoot and Alerts).<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Cisco_Nexus_9000_Series_NX-OS_Cloud_Scale_ASIC_Architecture\"><\/span>Cisco Nexus 9000 Series (NX-OS \/ Cloud Scale ASIC Architecture)<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<ul>\n<li><strong>Architecture Definition:<\/strong> Cisco Nexus 9300 and 9500 data center switches run NX-OS on Cisco Cloud Scale ASICs (Tahoe\/Sugarbowl\/Homewood families). Buffers are allocated per slice across ingress and egress port groups (<code>qos-group 0<\/code> through <code>qos-group 7<\/code>), supporting lossless RoCEv2\/No-Drop classes alongside tail-drop and WRED classes.<\/li>\n<li><strong>Hardware-Level Diagnostic Commands:<\/strong><\/li>\n<li><code>show queuing interface ethernet &lt;slot\/port&gt;<\/code> \u2014 Reports per-qos-group unicast, multicast, and span egress discard counters and peak buffer occupancy waters-marks.<\/li>\n<li><code>show hardware internal errors<\/code> \u2014 Queries all ASIC slices for internal drop causes, parity errors, and forwarding lookup drops.<\/li>\n<li><code>show system internal qos Buffer-stats detail<\/code> \u2014 Inspects real-time shared pool cell consumption across ASIC slices.<\/li>\n<li><strong>Official Cisco Documentation Reference:<\/strong> <em>Cisco Nexus 9000 Series NX-OS Troubleshooting Guide (Chapter: Troubleshooting Packet Drops)<\/em> and <em>Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide<\/em>.<\/li>\n<\/ul>\n<h3><span class=\"ez-toc-section\" id=\"Platform_Command_Matrix_Catalyst_IOS-XE_vs_Nexus_NX-OS\"><\/span>Platform Command Matrix: Catalyst IOS-XE vs. Nexus NX-OS<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left;\">Diagnostic Objective<\/th>\n<th style=\"text-align: left;\">Cisco Catalyst (IOS-XE) Command<\/th>\n<th style=\"text-align: left;\">Cisco Nexus (NX-OS) Command<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left;\"><strong>Port Error &amp; Discard Summary<\/strong><\/td>\n<td style=\"text-align: left;\"><code>show interfaces counters errors<\/code><\/td>\n<td style=\"text-align: left;\"><code>show interface counters errors<\/code><\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Per-Queue Egress Drops<\/strong><\/td>\n<td style=\"text-align: left;\"><code>show platform hardware fed switch active qos queue stats interface &lt;id&gt;<\/code><\/td>\n<td style=\"text-align: left;\"><code>show queuing interface &lt;id&gt;<\/code><\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Internal ASIC Drop Reasons<\/strong><\/td>\n<td style=\"text-align: left;\"><code>show platform hardware fed switch active fwd-asic drops exceptions<\/code><\/td>\n<td style=\"text-align: left;\"><code>show hardware internal errors<\/code><\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left;\"><strong>Control Plane (CPU Punt) Drops<\/strong><\/td>\n<td style=\"text-align: left;\"><code>show platform software fed switch active punt cpuq all<\/code><\/td>\n<td style=\"text-align: left;\"><code>show policy-map interface control-plane<\/code><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><strong>Key Takeaway:<\/strong> Use standard <code>show interfaces<\/code> commands for initial triage, then transition to <code>show platform hardware fed<\/code> on Catalyst IOS-XE or <code>show queuing interface<\/code> on Nexus NX-OS to inspect per-queue ASIC drops.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Best_SNMP_Network_Monitoring_Tools_for_Tracking_Cisco_Switch_Packet_Loss\"><\/span>Best SNMP Network Monitoring Tools for Tracking Cisco Switch Packet Loss<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>While CLI commands are essential for live troubleshooting, manually checking hundreds of switch ports cannot catch transient packet drops that happen overnight. Network monitoring platforms automate this process by polling standard SNMP MIBs\u2014specifically <code>IF-MIB<\/code> (<code>ifInErrors<\/code>, <code>ifInDiscards<\/code>, <code>ifOutErrors<\/code>, <code>ifOutDiscards<\/code>), <code>CISCO-CLASS-BASED-QOS-MIB<\/code> for per-queue drops, and <code>CISCO-RTTMON-MIB<\/code> for IP SLA statistics\u2014to graph historical drop rates and fire alerts automatically.<\/p>\n<ol>\n<li>\n<p><strong>SolarWinds Network Performance Monitor (NPM)<\/strong><br \/>\n   SolarWinds NPM provides deep out-of-the-box integration for Cisco Catalyst and Nexus environments. Beyond polling standard <code>IF-MIB<\/code> error and discard counters, NPM natively discovers duplex mismatches by cross-referencing CDP\/LLDP neighbor states with error signatures, polls Cisco Class-Based QoS (<code>CBQoS<\/code>) to chart per-queue drops, and integrates with SolarWinds VoIP &amp; Network Quality Manager (VNQM) to automate and graph Cisco IP SLA jitter and packet loss probes.<\/p>\n<\/li>\n<li>\n<p><strong>Paessler PRTG Network Monitor<\/strong><br \/>\n   PRTG uses a sensor-based architecture featuring dedicated <strong>SNMP Traffic<\/strong>, <strong>SNMP Cisco System Health<\/strong>, and <strong>SNMP Cisco IP SLA<\/strong> sensors. Administrators can enable &#8220;Discards&#8221; and &#8220;Errors&#8221; channels inside every switch port&#8217;s SNMP Traffic sensor and configure granular threshold triggers (for example, alerting via Slack or PagerDuty whenever <code>ifOutDiscards<\/code> exceeds 50 packets per second for two consecutive polling intervals).<\/p>\n<\/li>\n<li>\n<p><strong>LibreNMS<\/strong><br \/>\n   For teams seeking an open-source, zero-licensing-cost solution, LibreNMS offers automated network discovery via CDP, LLDP, and ARP alongside comprehensive native support for Cisco IOS, IOS-XE, and NX-OS MIBs. It automatically generates RRDtool time-series graphs for interface errors, discards, and DOM optical transceiver power levels, and includes a flexible rule builder to alert on sudden spikes in CRC errors or output drops.<\/p>\n<\/li>\n<li>\n<p><strong>Zabbix<\/strong><br \/>\n   Zabbix is an enterprise-grade open-source monitoring platform that ships with official <strong>Cisco IOS by SNMP<\/strong> and <strong>Cisco Nexus 9000 Series by SNMP<\/strong> templates. These templates calculate rate-of-change triggers on <code>ifInDiscards<\/code>, <code>ifOutDiscards<\/code>, <code>ifInErrors<\/code>, and <code>ifOutErrors<\/code>, automatically flagging interfaces where the packet drop percentage exceeds a customizable baseline relative to total packet throughput.<\/p>\n<\/li>\n<li>\n<p><strong>LogicMonitor<\/strong><br \/>\n   LogicMonitor is a cloud-based observability platform with extensive pre-built Cisco LogicModules. In addition to tracking standard interface error rates, LogicMonitor automatically discovers Cisco QoS policy-maps and hardware environmental sensors, correlating switch buffer exhaustion with upstream router or firewall utilization so teams can pinpoint whether packet loss is localized to a single access switch or cascading across a distribution tier.<\/p>\n<\/li>\n<\/ol>\n<p><strong>Key Takeaway:<\/strong> Deploy an SNMP monitoring tool that polls both <code>IF-MIB<\/code> (<code>ifOutDiscards<\/code>\/<code>ifInErrors<\/code>) and <code>CISCO-CLASS-BASED-QOS-MIB<\/code> at 1-to-5-minute intervals so you can correlate exact packet drop timestamps with application traffic spikes.<\/p>\n<hr \/>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Conclusion<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Checking and resolving packet loss on a Cisco switch requires following the lifecycle of a frame from the physical cable through the internal ASIC buffers. By resetting stale counters and running <code>show interfaces counters errors<\/code> and <code>show interfaces &lt;id&gt;<\/code>, you can immediately separate Layer 1 input errors (such as CRC faults, runts, and duplex mismatches) from egress congestion (<code>Total output drops<\/code>). Pairing passive counter inspection with active Extended Ping or IP SLA probes, tuning dynamic QoS queue buffers (<code>qos queue-softmax-multiplier<\/code>), and maintaining continuous SNMP visibility ensures silent packet drops are identified and eliminated before they impact end-user applications.<\/p>\n<div class='sfsi_Sicons' style='width: 100%; display: inline-block; vertical-align: middle; text-align:left'><div style='margin:0px 8px 0px 0px; line-height: 24px'><span>Please follow and like us:<\/span><\/div><div class='sfsi_socialwpr'><div class='sf_fb_share sf_icon' style='text-align:left;vertical-align: middle;'><a href='https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fcciedump.spoto.net%2Fblog%2Fhow-to-check-packet-loss-on-cisco-switch_24591.html' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Facebook Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/fbshare_bck.png'  \/><\/a><\/div><div class='sf_twiter sf_icon' style='display: inline-block;vertical-align: middle;width: auto;margin-left: 7px;'>\r\n\t\t\t\t\t\t<a target='_blank' href='https:\/\/twitter.com\/intent\/tweet?text=How+to+Check+Packet+Loss+on+Cisco+Switch+https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html'style='display:inline-block' >\r\n\t\t\t\t\t\t\t<img data-pin-nopin= true width='auto' class='sfsi_wicon' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/visit_icons\/en_US_Tweet.svg' alt='Tweet' title='Tweet' >\r\n\t\t\t\t\t\t<\/a>\r\n\t\t\t\t\t<\/div><div class='sf_pinit sf_icon' style='text-align:left;vertical-align: middle;float:left;line-height: 33px;width:auto;margin: 0 -2px;'><a href='#'  onclick='sfsi_pinterest_modal_images(event,\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\",\"How to Check Packet Loss on Cisco Switch\")' style='display:inline-block;'  > <img class='sfsi_wicon'  data-pin-nopin='true' width='auto' height='auto' alt='fb-share-icon' title='Pin Share' src='https:\/\/cciedump.spoto.net\/blog\/wp-content\/plugins\/ultimate-social-media-icons\/images\/share_icons\/Pinterest_Save\/en_US_save.svg'  \/><\/a><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Diagnosing degraded network performance, sluggish application response times, or choppy VoIP calls often starts at the switching layer. Unlike full link outages that immediately trigger down alerts, silent packet drops on a switch port can throttle TCP throughput while every interface still displays an up\/up status. Because a Cisco switch can drop frames at the&#8230; &raquo; <a class=\"read-more-link\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\">read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,608],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v18.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Check Packet Loss on Cisco Switch - SPOTO Official Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Check Packet Loss on Cisco Switch - SPOTO Official Blog\" \/>\n<meta property=\"og:description\" content=\"Diagnosing degraded network performance, sluggish application response times, or choppy VoIP calls often starts at the switching layer. Unlike full link outages that immediately trigger down alerts, silent packet drops on a switch port can throttle TCP throughput while every interface still displays an up\/up status. Because a Cisco switch can drop frames at the... &raquo; read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\" \/>\n<meta property=\"og:site_name\" content=\"SPOTO Official Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-17T08:58:51+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"SPOTO \u7f16\u8f91\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"15 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\",\"name\":\"SPOTO Club\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg\",\"caption\":\"SPOTO Club\"},\"logo\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\"},\"description\":\"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205\",\"sameAs\":[\"https:\/\/cciedump.spoto.net\/\"]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/\",\"name\":\"SPOTO Official Blog\",\"description\":\"Focus on Online IT Training for 20+ Years\",\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#webpage\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\",\"name\":\"How to Check Packet Loss on Cisco Switch - SPOTO Official Blog\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#website\"},\"datePublished\":\"2026-11-17T08:58:51+00:00\",\"dateModified\":\"2026-11-17T08:58:51+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/cciedump.spoto.net\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Check Packet Loss on Cisco Switch\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#article\",\"isPartOf\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#webpage\"},\"author\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\"},\"headline\":\"How to Check Packet Loss on Cisco Switch\",\"datePublished\":\"2026-11-17T08:58:51+00:00\",\"dateModified\":\"2026-11-17T08:58:51+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#webpage\"},\"wordCount\":2369,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638\"},\"articleSection\":[\"CCNA Certification\",\"Cisco Certification\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1\",\"name\":\"SPOTO \u7f16\u8f91\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/cciedump.spoto.net\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"contentUrl\":\"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155\",\"caption\":\"SPOTO \u7f16\u8f91\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Check Packet Loss on Cisco Switch - SPOTO Official Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html","og_locale":"en_US","og_type":"article","og_title":"How to Check Packet Loss on Cisco Switch - SPOTO Official Blog","og_description":"Diagnosing degraded network performance, sluggish application response times, or choppy VoIP calls often starts at the switching layer. Unlike full link outages that immediately trigger down alerts, silent packet drops on a switch port can throttle TCP throughput while every interface still displays an up\/up status. Because a Cisco switch can drop frames at the... &raquo; read more","og_url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html","og_site_name":"SPOTO Official Blog","article_published_time":"2026-11-17T08:58:51+00:00","twitter_card":"summary_large_image","twitter_misc":{"Written by":"SPOTO \u7f16\u8f91","Est. reading time":"15 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Person","Organization"],"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638","name":"SPOTO Club","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/uploads\/2020\/03\/spoto-facemask-96x96.jpg","caption":"SPOTO Club"},"logo":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo"},"description":"SPOTO is an excellent leader in IT certification training for 20+ years. We offer 100% real Cisco CCNA, CCNP exam dumps, CCIE Lab study materials, PMP, CISA, CISM, AWS, Palo Alto, and other IT exam dumps. We have helped thousands of candidates around the world to pass their IT exams on the first try! As the first-class online IT training organization in China, SPOTO cooperates with many giant Internet companies in China like Tencent, Baidu, and Alibaba. What\u2019s more, we have won lots of awards in IT education training such as \u201cTop Ten Influential Brands In Online Education Industry\u201d given by Baidu, \u201cOfficial IT Online Training Organization\u201d awarded by Tencent Class, etc. Join us: https:\/\/cciedump.spoto.net\/ Contact us: E-mail: support@spoto.net Phone \/ WhatsApp: +86 18344981205","sameAs":["https:\/\/cciedump.spoto.net\/"]},{"@type":"WebSite","@id":"https:\/\/cciedump.spoto.net\/blog\/#website","url":"https:\/\/cciedump.spoto.net\/blog\/","name":"SPOTO Official Blog","description":"Focus on Online IT Training for 20+ Years","publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cciedump.spoto.net\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#webpage","url":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html","name":"How to Check Packet Loss on Cisco Switch - SPOTO Official Blog","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#website"},"datePublished":"2026-11-17T08:58:51+00:00","dateModified":"2026-11-17T08:58:51+00:00","breadcrumb":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cciedump.spoto.net\/blog"},{"@type":"ListItem","position":2,"name":"How to Check Packet Loss on Cisco Switch"}]},{"@type":"Article","@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#article","isPartOf":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#webpage"},"author":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1"},"headline":"How to Check Packet Loss on Cisco Switch","datePublished":"2026-11-17T08:58:51+00:00","dateModified":"2026-11-17T08:58:51+00:00","mainEntityOfPage":{"@id":"https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#webpage"},"wordCount":2369,"commentCount":0,"publisher":{"@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/25594d4796697ccb1ef63d55c269c638"},"articleSection":["CCNA Certification","Cisco Certification"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cciedump.spoto.net\/blog\/how-to-check-packet-loss-on-cisco-switch_24591.html#respond"]}]},{"@type":"Person","@id":"https:\/\/cciedump.spoto.net\/blog\/#\/schema\/person\/4edd6074d9632c14eda17a2205a88dd1","name":"SPOTO \u7f16\u8f91","image":{"@type":"ImageObject","@id":"https:\/\/cciedump.spoto.net\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","contentUrl":"https:\/\/cciedump.spoto.net\/blog\/wp-content\/litespeed\/avatar\/f525ded90e4ff384a19ebdbe47c80d22.jpg?ver=1794560155","caption":"SPOTO \u7f16\u8f91"}}]}},"_links":{"self":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24591"}],"collection":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/comments?post=24591"}],"version-history":[{"count":0,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/posts\/24591\/revisions"}],"wp:attachment":[{"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/media?parent=24591"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/categories?post=24591"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cciedump.spoto.net\/blog\/wp-json\/wp\/v2\/tags?post=24591"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}